7.- MÉCANIQUE

Mécanique est la discipline scientifique qui étudie les phénomènes physiques qui affectent les éléments de la nature. Bien qu'elle soit appelée mécanique, elle comprend en fait à la fois la mécanique classique et la mécanique quantique, qui sont deux des piliers fondamentaux de la physique moderne.

Voir plus

Mécanique classique traite de l'étude du corps rigide ainsi que des systèmes d'un nombre fini ou infini (milieu continu) de degrés de liberté, tandis que mécanique quantique étudie les systèmes de petite ou petite échelle énergie.

Comme dans toute science expérimentale, chaque étude mécanique d'un corps implique un processus analyse, d'un point de vue physique et mathématique, et expérimentation. Mais, contrairement à d'autres disciplines scientifiques, en mécanique, il n'est pas si complexe d'étudier le comportement théorique interprété dans un système réel.

Grâce aux contributions de nombreux scientifiques, tels que Newton, Lagrange, Hamilton ou Schrödinger, il est possible d'établir certaines lois fondamentales ou certains principes de la mécanique:

  • Lois de Newton.
  • Principe de conservation de l'élan.
  • Principe d'économie d'énergie.
  • Principe de conservation du moment angulaire (ou cinétique) et équation fondamentale de la dynamique de rotation.

Vu l'extension de son domaine d'étude, il convient de mentionner les domaines les plus représentatifs:

  • Ingénierie.
  • Statistiques.
  • Dynamique.
  • Mécanique des fluides.
  • Thermodynamique et transfert de chaleur.
  • Science, élasticité et résistance des matériaux.
  • Analyse numérique (méthode des éléments finis).

En raison de l'évolution constante de la industrie, les branches de la ingénierie mécanique, ingénierie automobile et automobile, calcul des structures, développement des machines, ainsi que leur installation et maintenance, sont les plus développées aujourd'hui.

Voir les produits
Matériels Associés
SOUS-CATÉGORIES DE MÉCANIQUE

7.1.- INGÉNIERIE MÉCANIQUE

Ingénerie Mécanique est l'application de la physique aux éléments qui nous entourent pour améliorer les dispositifs mécaniques existants ou en créer de nouveaux. Comme il est basé sur des principes physiques, son origine remonte à l'origine de ces principes et son développement est étroitement...
Voir

7.2.- INGÉNIERIE MÉCANIQUE AUTOMOBILE

L'industrie automobile est l'une des principales applications de la mécanique actuelle. Le véhicule à moteur à combustion interne à essence est considéré comme la plus grande invention du 20e siècle, bien que les premiers prototypes aient déjà été fabriqués à la fin du 18e siècle. Le premier...
Voir

7.3.- INGÉNIERIE DES MATÉRIAUX

Ingénierie des matériaux est la branche scientifique et industrielle chargée de faire une interprétation industrielle de la science des matériaux. Anthropologiquement, les différentes étapes du développement humain ont été classées en fonction des matériaux utilisés dans la fabrication des outils...
Voir

7.4.- INSTALLATIONS ET MAINTENANCE

Les besoins de la société actuelle sont un défi pour toute industrie, car ils doivent être en constante évolution et renouvellement pour s'adapter à ces besoins.Ces dernières années, à la suite de la nouvelle révolution industrielle ou Industrie 4. 0, l'émergence de l'Internet industriel des...
Voir
PRODUITS DE MÉCANIQUE
Affichage 61-90 de 171 article(s)
RADIAL PRESSURE DISTRIBUTION IN A JOURNAL BEARING - MEMT-1
  • Accessoire de MEMT
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MEMT-1
Distribution de la Pression Radiale dans un Palier
Accessoire de MEMT
This unit allows the visualization of the radial pressure distribution in a journal bearing with hydrodynamic lubrication.The "MEMT-1" unit consists of a journal bearing with hydrodynamic lubrication, a freely moving bearing housing with thirteen...
DYNAMIC FRICTION OF A CYLINDER ON A ROLLER - MEMT-2
  • Accessoire de MEMT
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MEMT-2
Friction Dynamique d'un Cylindre sur un Rouleau
Accessoire de MEMT
This unit allows to demonstrate the friction forces between several cylinders of different materials and a roller under different lubrication conditions.The "MEMT-2" unit consists of two levers that transmit a force applied by weights to a test...
DYNAMIC FRICTION OF A PIN ON A DISC - MEMT-3
  • Accessoire de MEMT
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MEMT-3
Friction Dynamique d'une Goupille sur un Disque
Accessoire de MEMT
This unit allows to study the friction forces between several vertical friction pins of different materials and a rotating friction disc.The end of each vertical pin is made of a different material and rubs against the rotating steel disc. The...
ROLLING FRICTION IN WHEELS - MEMT-4
  • Accessoire de MEMT
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MEMT-4
Friction par Rotation sur des Roues
Accessoire de MEMT
This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...
ELASTOHYDRODYNAMIC LUBRICATION - MEMT-5
  • Accessoire de MEMT
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MEMT-5
Lubrification Elastohydrodynamique
Accessoire de MEMT
This unit allows to investigate the thickness and characteristics of a lubricant film on a rolling sphere.The unit consists in a steel sphere and a driven glass disc.The sphere is pressed against the underside of the glass disc. The light from a...
FRICTION VIBRATION - MEMT-6
  • Accessoire de MEMT
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MEMT-6
Vibration / Friction
Accessoire de MEMT
This module allows to demonstrate the static friction, the sliding friction, the related friction vibrations and the slip-stick effects.Several weights are placed on a horizontally rotating friction disc. It is prevented from turning by a cord....
THIN CYLINDER UNIT - MCD
  • MCD
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MCD
Unité de Cylindre Mince
The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...
UNIT FOR STUDYING BEARING FRICTION - MBF
  • MBF
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MBF
Unité pour l'Étude du Frottement Porteur
L'Unité pour l'Étude du Frottement Porteur, "MBF", a été conçu par EDIBON pour étudier le frottement des roulements à billes et des roulements à rouleaux. Puisque le frottement de roulement est très faible, les essais de base de dynamique de...
BELT FRICTION UNIT WITH DYNAMOMETERS - MCF/A
  • MCF/A
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MCF/A
Unité de Frottement des Courroies Avec Dynamomètres
The Belt Friction Unit with Dynamometers, "MCF/A", allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.With this unit it is possible to observe the relationship between...
THICK WALLED CYLINDER UNIT - MCPG
  • MCPG
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MCPG
Unité de Cylindres à Paroi Épaisse
In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...
UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG
  • MFPG
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MFPG
Unité d'Étude de Forces en Grues Fixes
The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...
SUSPENSION BRIDGE UNIT - MVS
  • MVS
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MVS
Unité de Pont Suspendu
The Suspension Bridge Unit, "MVS", consists of a deck and two parallel main cables that simulate a suspension bridge and allow the study of stress in the main cables. The deck of the bridge is simulated by a light alloy beam that is held by both...
PARABOLIC ARCH UNIT - MARP
  • MARP
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MARP
Unité d'Arc Parabolique
L'Unité d'Arc Parabolique, "MARP", contient un arc articulé préformé, qui peut être soumis à des charges ponctuelles ou uniformément réparties par au moyen de sept câbles (cordons) uniformément répartis avec des suspensions.L'un des supports de...
THREE-HINGED ARCH UNIT - MART
  • MART
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MART
Unité d'Arc à Trois Articulations
L'unité Arche à trois charnières, "MART", permet à l'étudiant de se familiariser avec les arches à trois charnières, de calculer les forces portantes (pour une charge ponctuelle, une charge uniformément répartie et une charge mobile), d'étudier...
UNIT FOR STUDYING FORCES IN AN OVERDETERMINATE TRUSS - MFCS2
  • MFCS2
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MFCS2
Unité d'Étude de Forces dans Treillis Hyperstatiques
The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in the single plane...
UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3
  • MFCS3
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MFCS3
Unité d'Étude de la Déformation dans Treillis
The Unit for studying Deformation of Trusses, "MFCS3", allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the experimental forces in the...
TWO HINGED ARCH UNIT - MFL
  • MFL
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MFL
Unité de Deux Arches Articulées
The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...
PORTAL FRAME UNIT - MPO
  • MPO
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MPO
Unité de Structure en Portique
The Portal Frame Unit, "MPO", allows to perform vertical deflection and horizontal deflection measurements in a fixed rectangular portal frames.To carry out the deflection tests, a series of loads with different weight must be applied to the...
STRESS HYPOTHESES UNIT - STH
  • STH
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
STH
Unité d'Hypothèses de Contraintes
The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...
SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE
  • MEPE
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MEPE
Unité d'Etude de Problèmes de Stabilité Simples
The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...
UNIT TO STUDY STRESS ON A MEMBRANE - SSM
  • SSM
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
SSM
Unité pour l'Étude de Tenions dans une Membrane
The Unit to Study Stress on a Membrane, "SSM", designed by EDIBON, allows the study of stresses and deformations in a thin disc or membrane subjected to different compressive stresses.The main element of the equipment is a thin disc or membrane...
UNSYMMETRICAL CANTILEVER UNIT - MVV
  • MVV
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MVV
Unité de Porte à Faux Asymétrique
The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...
DEFLECTION OF CURVED BARS UNIT - MDB
  • MDB
Available
7.3.2.1.- TEST MÉCANIQUE
MDB
Unité de Déviation des Barres Incurvées
The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- TEST MÉCANIQUE
MFV
Unité de Déviation en Poutres
L'Unité de Déviation en Poutres, "MFV" a été conçue pour permettre aux étudiants d'observer et d'étudier les phénomènes suivants dans les poutres simplement appuyées et les poutres en porte-à-faux :Relation entre les flèches et les charges...
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- TEST MÉCANIQUE
MFLT
Unité de Flambement des Jambes de Force
The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- TEST MÉCANIQUE
MUP
Unité de Flambage Universelle
The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF
  • MMF
Available
7.3.2.1.- TEST MÉCANIQUE
MMF
Unité Force de cisaillement et de Moment de Flexion
The Shear Force and Bending Momentum Unit, "MMF", unit is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the application of one...
Demander des informations