7.3.2.1.- TEST MÉCANIQUE

PRODUITS DE TEST MÉCANIQUE
Affichage 1-15 de 15 article(s)
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- TEST MÉCANIQUE
EEU/20KN

Équipement d' Essai Universel

The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...
BRINELL HARDNESS TESTING UNIT - EEDB
  • EEDB
Available
7.3.2.1.- TEST MÉCANIQUE
EEDB

Équipement pour l'Essai de Dureté Brinell

The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...
CREEP TESTING UNIT - EEFCR
  • EEFCR
Available
7.3.2.1.- TEST MÉCANIQUE
EEFCR

Équipement pour l'Essai de Fluage

The Creep Testing Unit ,EEFCR, for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The EEFCR unit is designed to carry out experiments on specimens of plastic materials. Due to the...
FATIGUE TESTING UNIT - EEF
  • EEF
Available
7.3.2.1.- TEST MÉCANIQUE
EEF

Unité d'Essai de Fatigue

The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...
CHARPY AND IZOD IMPACT TESTING UNIT - EEICI
  • EEICI
Available
7.3.2.1.- TEST MÉCANIQUE
EEICI

Équipement pour l'Essai des Impacts Charpy et Izod

The Charpy and Izod Impact Testing Unit “EEICI” consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- TEST MÉCANIQUE
MUP

Équipement de Flambage Universelle

The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- TEST MÉCANIQUE
MFLT

Équipement de Flambage

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
TORSION AND BEND UNIT - MTP
  • MTP
Available
7.3.2.1.- TEST MÉCANIQUE
MTP

Équipement de Torsion et de Flexion

The Torsion and Bend Unit, "MTP", is a combined apparatus for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate its transport...
TORSION UNIT - MTB
  • MTB
Available
7.3.2.1.- TEST MÉCANIQUE
MTB

Équipement de Torsion

To perform the tests a metallic rod is fastened by clamps and subjected to the testing force. Force is gradually applied on the rod toobserve the elastic tension generated. The force moment or torque is applied by a dynamometer with a lever....
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- TEST MÉCANIQUE
MTTU

Équipement de Testeur de Traction

With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...
DEFLECTION OF CURVED BARS UNIT - MDB
  • MDB
Available
7.3.2.1.- TEST MÉCANIQUE
MDB

Équipement de Déviation des Barres Incurvées

The Deflection of Curved Bars Unit “MDB” consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- TEST MÉCANIQUE
MFV

Unité de Déviation en Poutres

This unit has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and the cross section on the...
SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF
  • MMF
Available
7.3.2.1.- TEST MÉCANIQUE
MMF

Équipement Force de cisaillement et de Moment de Flexion

The Shear Force and Bending Momentum Unit “MMF” is formed by an aluminum and steel structure that allows us to perform a mechanicalstudy of different structures.An articulated structure makes it possible to convert the application of one vertical...