8.9.- INSTALLATIONS ET MAINTENANCE

The needs of today's society are a challenge for any industry, since they have to be in continuous evolution and renewal to adapt to those needs.

Voir plus

In recent years, as a result of the new industrial revolution or ",Industry 4.0",, the emergence of the ",Industrial Internet of Things", (IIoT) and the ",Smart Factories",, that adaptation is possible thanks to the application of the most sophisticated techniques in the design of new facilities or in the renovation of existing ones.

In spite of all these technological advances and the exhaustive controls carried out, it should not be forgotten that there will be problems because of erosion, corrosion, cavitation or poor lubrication in every hydraulic productive process. For that reason, the useful life of those facilities is limited. To avoid catastrophic failures, stoppages in production or any type of process that implies an increase of non-productive times and, therefore, an increase of costs, it is extremely important to carry out a good maintenance of the installation components, as for example valves, pumps and pipes.

Traditionally, only two types of maintenance were considered:

    • Corrective: the fault is solved once it has already occurred.
    • Preventive: periodic review of all those problematic elements and their replacement if required.

These types of maintenance involve very high and unnecessary costs in most cases. Nowadays, thanks to the available technology, it is possible to carry out predictive maintenance consisting of a comprehensive analysis of all those variables that take part in all the components of a system and be able to replace them at the right time.

Some precautions must be taken in hydraulic facilities, for example draining the systems, replacing the hydraulic filters that remove contaminants in the pipelines, controlling the level of liquids, repairing leaks, etc. But, if more control is preferred, there is another type of maintenance, known as proactive maintenance. It goes one step further than the predictive maintenance, looking for the root of the problem.

Voir les produits
PRODUITS DE INSTALLATIONS ET MAINTENANCE
Affichage 1-30 de 30 article(s)
UNIT TO STUDY A WATER METER CUTAWAY MODEL - WMCM
  • WMCM
Available
8.9.1.- MODÈLES EN COUPE
WMCM

Unité pour Étudier un Modèle en Coupe de Compteur d'Eau

The Unit to Study a Water Meter Cutaway Model, “WMCM”, allows the students to visualize the inner parts of a water meter, to evaluate the relation with each other accurately and to understand their function.It is a model of a device that measures,...
ASSEMBLY OF A SHUT-OFF VALVE UNIT - ASV
  • ASV
Available
8.9.2.- MODÈLES DÉTACHABLES
ASV

Unité de Montage d'une Vanne d'arrêt

The Assembly of a Shut-Off Valve Unit, "ASV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts list and the...
ASSEMBLY OF A MOTORIZED CONTROL VALVE UNIT - AMCV
  • AMCV
Available
8.9.2.- MODÈLES DÉTACHABLES
AMCV

Assembly of a Motorized Control Valve Unit

The Assembly of a Motorized Control Valve Unit, "AMCV" is a ball motorized control valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit,...
ASSEMBLY OF A CONTROL PNEUMATIC VALVE UNIT - ACPV
  • ACPV
Available
8.9.2.- MODÈLES DÉTACHABLES
ACPV

Assembly of a Control Pneumatic Valve Unit

The Assembly of a Control Pneumatic Valve Unit, "ACPV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts...
ASSEMBLY AND MAINTENANCE OF PUMPS - AMP
  • AMP
Available
8.9.2.- MODÈLES DÉTACHABLES
AMP

Assemblage et Maintenance des Pompes

The different sets for the assembly and maintenance of pumps have all the parts in a case for an easy transport, facilitating the clearidentification of all the components and allowing the systematic assembly and disassembly, maintenance and...
ASSEMBLY AND MAINTENANCE OF A SCREW PUMP UNIT - AMSP
  • Accessoire de AMP
Available
8.9.2.- MODÈLES DÉTACHABLES
AMSP

Unité d'assemblage et de Maintenance d'une Pompe à Vis

Accessoire de AMP
The screw pumps belong to the group of positive displacement pumps, which use aneccentric helical screw (rotor) that moves inside a sleeve (stator), making the liquid flowbetween the screw and the sleeve. The most important applications of this...
PIPES, VALVES AND FITTINGS ASSEMBLY UNIT - PVFA
  • PVFA
Available
8.9.3.- INSTALLATIONS ET MAINTENANCE
PVFA

Équipement d'Assemblage de Tuyaux, Vannes et Raccords

The Pipes, Valves and Fittings Assembly Unit, "PVFA", designed by EDIBON, consists of a solid and rigid U-shaped frame where a series ofreal pipes and fittings are mounted to form a complete hydraulic system.A filter, a sight glass and a pressure...
BACKFLOW PREVENTION TRAINING UNIT - BFPT
  • BFPT
Available
8.9.3.- INSTALLATIONS ET MAINTENANCE
BFPT

Backflow Prevention Training Unit

The Backflow Prevention Training Unit, “BFPT”, allows verifying the operation of multiple non-return devices.The system contains the most common backflow prevention devices used in the industry. The main objective is to recognize each elementand...
THREE-WAY MIXING VALVE TRAINING UNIT - TEV3V
  • TEV3V
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TEV3V

Équipement de Formation de Valvule Mélangeuse de 3 Voies

The Three-Way Mixing Valve Training Unit, "TEV3V", allows to demonstrate the function of a three-way mixing valve in a hot water heating system. The three-way mixing valve in the heating system regulates the supply water temperature to a heating...
FOUR-WAY MIXING VALVE TRAINING UNIT - TEV4V
  • TEV4V
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TEV4V

Équipement de Formation de Valvule Mélangeuse de 4 Voies

The Four-Way Mixing Valve Training Unit, "TEV4V", allows to demonstrate the function of a four-way mixing valve in a hot water heating system. The four-way mixing valve in the heating system regulates the circulation and feed flow temperatures of...
SANITARY FITTINGS TRAINING UNIT - TEIS
  • TEIS
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TEIS

Équipement de Formation de Raccords Sanitaires

The Sanitary Fittings Training Unit, "TEIS", has been designed by EDIBON for training in the plumbing sector. It consists of an anodized aluminum frame and panels in painted steel in which tests can be carried out with the most common systems of...
DRINKING WATER INSTALLATION UNIT - TIAP
  • TIAP
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TIAP

Équipement d'Installation d'Eau Potable

The Drinking Water Installation Unit, "TIAP", has been designed to demonstrate domestic water heating from the cold water supply. A typical domestic drinking water system is attached to the front panel of the unit. The unit includes the most...
PROTECTION OF DRINKING WATER TRAINING UNIT - TPAP
  • TPAP
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TPAP

Équipement de Protection en Installations d'Eau Potable

The Protection of Drinking Water Training Unit, “TPAP”, has been designed by EDIBON to study cases in which the drinking water system is contaminated with wastewater. It is specially designed for the training of students in the plumbing sector.The...
PIPE CLEANING TRAINING UNIT - TELT
  • TELT
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TELT

Équipement d'Étude de Systèmes de Nettoyage de Tubes

The Pipe Cleaning Training Unit, “TELT”, designed by EDIBON, simulates a real house piping system, so original components used in plumbing systems are employed. The objective of this unit is to study the cleaning of pipes from the sanitation...
SEWERAGE UNIT - TSID
  • TSID
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TSID

Équipement de Système d'Évacuation

With the Sewerage Unit, "TSID", tests about a wastewater sanitation system can be made and the flow in a sewage system can be observed.Its design allows the study of the operation and performance of sewage systems. It is specially designed for...