14.- GÉNIE BIOMÉDICAL

La Génie Biomédical étudie la mise en œuvre des connaissances en ingénierie dans le domaine de la biologie et de la médecine. La combinaison de instrumentation et de systèmes de contrôle électronique et l'application d'algorithmes mathématiques et de principes physiques et chimiques permettent à Génie biomédical d'étudier et de développer de nouvelles techniques et de nouveaux dispositifs pour la résolution de problèmes cliniques. Cette discipline va de la conception d'éléments de diagnostic et de logiciels médicaux aux outils d'analyse physiologique pour l'étude du cœur ou du système de rendez-vous .

Voir plus

La Génie Biomédical a évolué au fil des ans grâce aux progrès scientifiques et technologiques. Actuellement, des dispositifs tels que les systèmes de surveillance des signes vitaux ou les dispositifs de diagnostic facilitent le travail de soins médicaux. Le développement de méthodes d'analyse d'images telles que rayons X, ultrasons et résonance magnétique permettent d'étudier l'organisme humain de manière claire et rapide. En outre, les logiciels de gestion hospitalière télémédecine et hôpital sont utilisés.

Le futur du génie biomédical a encore un long chemin à parcourir, car la société actuelle exige des solutions médicales rapides et efficaces. Les appareils électroniques utilisés au quotidien permettront de suivre les valeurs des signes vitaux du patient à distance, de pouvoir analyser les symptômes avant un problème de santé et, même, de prévenir ce problème éventuel. Une autre tendance du génie biomédical est la simplification des outils de laboratoire. Des systèmes, tels que Lab On a Chip (LOC), intègrent les fonctions de laboratoire dans une seule puce. De nouvelles techniques robotiquechirurgie, de nouveaux matériaux organiques pour la fabrication de tissus artificiels et de tissus régénératifs ou l'impression en 3D d'organes artificiels permettront de répondre aux besoins médicaux futurs.

Voir les produits
Matériels Associés
SOUS-CATÉGORIES DE GÉNIE BIOMÉDICAL

14.1.- BIOMECANIQUE

Biomécanique étudie la mécanique du mouvement de l'organisme des êtres vivants, parmi lesquels le mouvement du corps humain humain. Cette étude va des mouvements les plus simples de la vie quotidienne, comme le travail ou l'activité sportive, au mouvement de certains organes internes, comme le...
Voir

14.2.- ÉLECTRONIQUE BIOMÉDICAL

Biomedical Engineering étudie l'application des connaissances en ingénierie dans le domaine de la biologie et de la médecine. L'un des domaines les plus pertinents de cette ingénierie est le domaine de l'électronique biomédicale, dans lequel les concepts de l'électronique sont appliqués pour le...
Voir

14.3.- ÉQUIPEMENT BIOMÉDICAL

Équipement Biomédical est l'ensemble des instruments utilisés dans le domaine de la médecine, biologie et pharmacologie. La conception de l'équipement biomédical est directement liée à l'instrumentation biomédicale, dans laquelle les instruments sont conçus pour obtenir des informations,...
Voir
PRODUITS DE GÉNIE BIOMÉDICAL
Affichage 1-30 de 171 article(s)
BASIC MECHANICS INTEGRATED LABORATORY - LIMEBA
  • LIMEBA
Available
14.1.1.- PRINCIPES DE BASE MÉCANIQUE
LIMEBA

Laboratoire Intégrale de Mécanique Basique

LIMEBA consists on a complete set of exercises and practical experiments belonging to the area of Applied Mechanics in its two mainsubareas:Statics: the analysis of structures in balance.Dynamics: analysis of the motion of mechanisms.LIMEBA is...
PANEL AND COMMON ELEMENTS CASE FOR LIMEBA - MECA/EC
Available
14.1.1.- PRINCIPES DE BASE MÉCANIQUE
MECA/EC

Panel et Cas des Éléments Communs pour le LIMEBA

Accessoire de LIMEBA
It is the supporting structure where the modules’s elements are mounted in order to undertake the experiments and hence, the basepanel is necessary along with any module.The panel is pierced with equidistant holes that help students to take...
STATICS EXPERIMENTS - MECA1
Available
14.1.1.- PRINCIPES DE BASE MÉCANIQUE
MECA1

Expériences statiques

Accessoire de LIMEBA
Statics is the part of Mechanics that studies any kind of structure or element in balance-equilibrium.Basically the module consist on experiments in which the student shall learn to deduce the main principles of Statics and its most important...
TRANSMISSIONS EXPERIMENTS - MECA3
Available
14.1.1.- PRINCIPES DE BASE MÉCANIQUE
MECA3

Expériences Transmissions

Accessoire de LIMEBA
Most recent machines require the transmission of motion between elements to obtain the desired mechanical result. The mechanisms studied in this module are those that transmit motion between two axles.
DYNAMICS EXPERIMENTS - MECA4
Available
14.1.1.- PRINCIPES DE BASE MÉCANIQUE
MECA4

Expériences dynamiques

Accessoire de LIMEBA
Dynamics is the part of Mechanics that analyzes the motion of an element or mechanism caused by a force. Thus the study is concentrated on the basic laws of Dynamics.
FRICTION EXPERIMENTS - MECA5
Available
14.1.1.- PRINCIPES DE BASE MÉCANIQUE
MECA5

Expériences de friction

Accessoire de LIMEBA
This module considers the most important phenomenon of Dynamics: Friction. It is a manifestation of the energy loss due to contact, effect that happens in every real-world mechanism.
SPECIAL MECHANISMS EXPERIMENTS - MECA6
Available
14.1.1.- PRINCIPES DE BASE MÉCANIQUE
MECA6

Mécanismes spéciaux Expériences

Accessoire de LIMEBA
This module considers various mechanisms frequently used in industrial processes, without them some operations would not be possible with the same efficiency. Here these mechanisms are shown and their function analyzed.
SLIDER CRANK MECHANISM - MBD
  • MBD
Available
14.1.2.1.- MÉCANISMES
MBD

Mécanisme à Bielle Coulissante

The Slider Crank Mechanism, "MBD", designed by EDIBON, is an example of slider-crank mechanism.This mechanism is made of aluminum and consists of a rotary element (graduated disc), called crank, connected to a rigid bar, calledconnecting rod. When...
SCOTCH YOKE MECHANISM - MYE
  • MYE
Available
14.1.2.1.- MÉCANISMES
MYE

Mécanisme Scotch Yoke

The Scotch Yoke Mechanism, "MYE", designed by EDIBON, is an example of slider-crank mechanism for converting the linear motion of a slider into rotational motion or vice versa. It is made of aluminum and consists of a rotary element, called...
SLOTTED LINK MECHANISM - MBM1
  • MBM1
Available
14.1.2.1.- MÉCANISMES
MBM1

Mécanisme à Bielle et Manivelle

The Slotted Link Mechanism, "MBM1", is an example of a quick-return mechanism, capable of transforming circular motion into reciprocating motion. It is made of aluminum and consists of a rotary element (graduated disk), called crank, connected to...
WHITWORTH QUICK RETURN MECHANISM - MBM2
  • MBM2
Available
14.1.2.1.- MÉCANISMES
MBM2

Mécanisme de Retour Rapide Whitworth

The Whitworth Quick Return Mechanism, "MBM2", is a mechanism able to transform circular movement into reciprocating movement. It ismade of aluminum and consists of a rotary element, called crank, with a graduated disk, connected to a rigid bar,...
FOUR-BAR MECHANISM - MCA
  • MCA
Available
14.1.2.1.- MÉCANISMES
MCA

Mécanisme à Quatre Barres

The Four-Bar Mechanism, "MCA", designed by EDIBON, is a bench-top unit to perform laboratory experiments.It is made of anodized aluminum and consists of two rotary elements (graduated discs) mounted on ball bearings. The discs include a scale to...
GENEVA STOP MECHANISM - MME
  • MME
Available
14.1.2.1.- MÉCANISMES
MME

Mécanisme d'Arrêt Genève

The Geneva Stop Mechanism, "MME", designed by EDIBON, is a mechanism that transforms continuous circular motion into intermittent motion. It is a positive drive in which the driven wheel is positively moved or locked.It is made of aluminum and...
COUPLING MECHANISM - MAC
  • MAC
Available
14.1.2.1.- MÉCANISMES
MAC

Mécanisme d'Accouplement

Le Mécanisme d'Accouplement, "MAC", représente un simple couplage de type Oldham. Le déplacement latéral des arbres d'entrée et de sortie peut être modifié et des échelles circulaires sont montées sur les brides d'entrée et de sortie.Il se compose...
HOOKE'S JOINT MECHANISM - MUN
  • MUN
Available
14.1.2.1.- MÉCANISMES
MUN

Mécanisme Commun Universel

The Hooke’s Joint Mechanism, "MUN", designed by EDIBON, represents a universal coupling, also called a U-joint, Hooke joint or Cardan joint. The Hooke joint is a universal mechanism that is often used to transmit rotary motion between two...
CAM AND FOLLOWER MECHANISM - MEX
  • MEX
Available
14.1.2.1.- MÉCANISMES
MEX

Mécanisme de Came et Suiveur

The Cam and Follower Mechanism, "MEX", allows to study the cam-follower and eccentric-follower mechanisms. For that purpose, several plate cam models in different forms, one eccentric and several roller-shaped, flat-shaped, wedge-shaped and...
CRANK MECHANISM - MBI
  • MBI
Available
14.1.2.1.- MÉCANISMES
MBI

Mécanisme de Manivelle

The Crank Mechanism "MBI", is a unit designed to observe, study and record the motion of a crank and the forces involved in a simple engine mechanism. The piston is linearly displaced through a cylinder with the aid of a guide.Bearings are coupled...
ACKERMANN STEERING MECHANISM - MDA
  • MDA
Available
14.1.2.1.- MÉCANISMES
MDA

Mécanisme de Direction "Ackermann"

The Ackermann Steering Mechanism, "MDA", is a bench-mounted unit designed to determine the lead angle of a steering trapezoid in an Ackermann steering mechanism, the disadvantages of incorrectly adjusted track rods and the influence of the track...
WINCH MECHANISM - MMEL
  • MMEL
Available
14.1.2.1.- MÉCANISMES
MMEL

Mécanisme de Levage

The Winch Mechanism, "MMEL", allows to study the lifting velocity and load transmission of a winch. Efficiency and load transmission can be determined by force balance.The unit consists of a gear transmission mechanism. One gear is the input gear...
BAR LINKAGES UNIT - MBLU
  • MBLU
Available
14.1.2.1.- MÉCANISMES
MBLU

Unité de Couplage de Barre

The Bar Linkages Unit "MBLU" allows many experiments using different arrangements of their parts. The "MBLU" unit includes a selection of more than 20 perforated bars of different lengths and pivots or ‘joints’ to allow students to configure...
WORM AND WHEEL UNIT - MTSF
  • MTSF
Available
14.1.2.2.- VITESSES
MTSF

Unité d'Engrenages de Forces à Vis sans Fin

The Worm and Wheel Unit, ,MTSF,, allows to demonstrate the principle of a worm gear. The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel. The worm and wheel are positioned a set distance...
ACCELERATION OF GEARED SYSTEM UNIT - MAE
  • MAE
Available
14.1.2.2.- VITESSES
MAE

Unité d´Accélération en Systèmes d´Engrenages

The Acceleration of Geared Systems Unit "MAE" allows to perform tests to calculate the moment of inertia of a gear train system.The MAE unit includes six gears. Two of them can have another position in the shafts to vary the gear ratio, allowing...
UNIT TO STUDY SIMPLE DRIVES ASSEMBLY - MSDA
  • MSDA
Available
14.1.2.2.- VITESSES
MSDA

Unité de Montage de Transmission Simple

The Unit to Study Simple Drives Assembly, "MSDA", allows the knowledge and learning of the fundamentals of the mechanical transmission technique, as well as the assembly, disassembly and experimentation with simple gears.The unit allows to carry...
UNIT TO STUDY COMBINED DRIVES ASSEMBLY - MCDA
  • MCDA
Available
14.1.2.2.- VITESSES
MCDA

Unité de Montage de Transmission Combiné

The Unit to Study Combined Drives Assembly, "MCDA", allows carrying out advanced exercises and provides an understanding of the significant components and arrangements of the mechanical drive technology.With this unit, practices can be carried out...
UNIT TO STUDY GEAR TRAIN ASSEMBLY - MGTA
  • MGTA
Available
14.1.2.2.- VITESSES
MGTA

Unité d'Assemblage de Train

The Unit to Study Gear Train Assembly, "MGTA", allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the technique of mechanical...
GEAR GENERATION UNIT - MGE
  • MGE
Available
14.1.2.2.- VITESSES
MGE

Crémaillère

The Gear Generation Unit, "MGE", has been designed by EDIBON to study rack and pinion systems. With this unit the student can draw by an easy procedure the profile of a tooth, produced by the involute process of the rack when passing over the...
GEARED LIFTING UNIT - MEE
  • MEE
Available
14.1.2.2.- VITESSES
MEE

Unité de Levage à Engrenages

The Geared Lifting Unit, "MEE", has been designed to study a simple lifting mechanism and its use to determine the speed ratio, its mechanical advantages and efficiency.The unit is mounted on a metal structure with bearings that support the gear...
GEARED STUDY - MESE-T
  • MESE-T
Available
7.1.2.2.- VITESSES
MESE-T

Étude des Engrenages

The Geared Study Drive Unit, "MESE", has been designed to dynamically study different gears, including a standard three shaft gear trainfor study, which can be modified with a simple setting to obtain a simple transmission.For the dynamic study...