7.1.2.- MACHINES SIMPLES

PRODUITS DE MACHINES SIMPLES
Affichage 1-22 de 22 article(s)
SLIDER CRANK MECHANISM - MBD
  • MBD
Available
14.1.2.1.- MÉCANISMES
MBD

Mécanisme à Bielle Coulissante

The Slider Crank Mechanism, "MBD", designed by EDIBON, is an example of slider-crank mechanism.This mechanism is made of aluminum and consists of a rotary element (graduated disc), called crank, connected to a rigid bar, calledconnecting rod. When...
SCOTCH YOKE MECHANISM - MYE
  • MYE
Available
14.1.2.1.- MÉCANISMES
MYE

Mécanisme Scotch Yoke

The Scotch Yoke Mechanism, "MYE", designed by EDIBON, is an example of slider-crank mechanism for converting the linear motion ofa slider into rotational motion or vice versa.It is made of aluminum and consists of a rotary element, called crank,...
SLOTTED LINK MECHANISM - MBM1
  • MBM1
Available
14.1.2.1.- MÉCANISMES
MBM1

Mécanisme à Bielle et Manivelle

The Slotted Link Mechanism, "MBM1", is an example of a quick-return mechanism, capable of transforming circular motion into reciprocating motion. It is made of aluminum and consists of a rotary element (graduated disk), called crank, connected to...
WHITWORTH QUICK RETURN MECHANISM - MBM2
  • MBM2
Available
14.1.2.1.- MÉCANISMES
MBM2

Mécanisme de Retour Rapide Whitworth

The Whitworth Quick Return Mechanism, "MBM2", is a mechanism able to transform circular movement into reciprocating movement. It ismade of aluminum and consists of a rotary element, called crank, with a graduated disk, connected to a rigid bar,...
FOUR-BAR MECHANISM - MCA
  • MCA
Available
14.1.2.1.- MÉCANISMES
MCA

Mécanisme à Quatre Barres

The Four-Bar Mechanism, "MCA", designed by EDIBON, is a bench-top unit to perform laboratory experiments.It is made of anodized aluminum and consists of two rotary elements (graduated discs) mounted on ball bearings. The discs include a scale to...
GENEVA STOP MECHANISM - MME
  • MME
Available
14.1.2.1.- MÉCANISMES
MME

Mécanisme d'Arrêt Genève

The Geneva Stop Mechanism, "MME", designed by EDIBON, is a mechanism that transforms continuous circular motion into intermittent motion. It is a positive drive in which the driven wheel is positively moved or locked. It is made of aluminum and...
COUPLING MECHANISM - MAC
  • MAC
Available
14.1.2.1.- MÉCANISMES
MAC

Mécanisme d'Accouplement

The Coupling Mechanism, "MAC", represents a simple Oldham type coupling. The lateral displacement of the input and output shafts may be varied and circular scales are fitted to the input and output flanges.It consists of two outer discs made of...
HOOKE'S JOINT MECHANISM - MUN
  • MUN
Available
14.1.2.1.- MÉCANISMES
MUN

Mécanisme d'Union

The Hooke’s Joint Mechanism, "MUN", designed by EDIBON, represents a universal coupling, also called a U-joint, Hooke joint or Cardan joint. The Hooke joint is a universal mechanism that is often used to transmit rotary motion between two...
CAM AND FOLLOWER MECHANISM - MEX
  • MEX
Available
14.1.2.1.- MÉCANISMES
MEX

Mécanisme de Came et Suiveur

The Cam and Follower Mechanism, "MEX", allows to study the cam-follower and eccentric-follower mechanisms. For that purpose, several plate cam models in different forms, one eccentric and several roller-shaped, flat-shaped, wedge-shaped and...
CRANK MECHANISM - MBI
  • MBI
Available
14.1.2.1.- MÉCANISMES
MBI

Mécanisme de Manivelle

The Crank Mechanism "MBI", is a unit designed to observe, study and record the motion of a crank and the forces involved in a simple engine mechanism. The piston is linearly displaced through a cylinder with the aid of a guide.Bearings are coupled...
ACKERMANN STEERING MECHANISM - MDA
  • MDA
Available
14.1.2.1.- MÉCANISMES
MDA

Mécanisme de Direction "Ackermann"

The Ackermann Steering Mechanism, "MDA", is a bench-mounted unit designed to determine the lead angle of a steering trapezoid in an Ackermann steering mechanism, the disadvantages of incorrectly adjusted track rods and the influence of the track...
WINCH MECHANISM - MMEL
  • MMEL
Available
14.1.2.1.- MÉCANISMES
MMEL

Mécanisme de Levage

The Winch Mechanism, "MMEL", allows to study the lifting velocity and load transmission of a winch. Efficiency and load transmission can be determined by force equilibrium. The winch is equipped with a safety element to prevent reversal of...
BAR LINKAGES UNIT - MBLU
  • MBLU
Available
14.1.2.1.- MÉCANISMES
MBLU

Unité de Couplage de Barre

The Bar Linkages Unit "MBLU" allows many experiments using different arrangements of their parts. The "MBLU" unit includes a selection of more than 20 perforated bars of different lengths and pivots or ‘joints’ to allow students to configure...
WORM AND WHEEL UNIT - MTSF
  • MTSF
Available
14.1.2.2.- VITESSES
MTSF

Équipement d'Engrenages de Forces à Vis sans Fin

The Worm and Wheel Unit, ,MTSF,, allows to demonstrate the principle of a worm gear. The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel. The worm and wheel are positioned a set distance...
UNIT TO STUDY SIMPLE DRIVES ASSEMBLY - MSDA
  • MSDA
Available
14.1.2.2.- VITESSES
MSDA

Équipement de Montage de Transmission Simple

The Unit to Study Simple Drives Assembly, "MSDA", allows the knowledge and learning of the fundamentals of the mechanical transmission technique, as well as the assembly, disassembly and experimentation with simple gears.The unit allows to carry...
UNIT TO STUDY COMBINED DRIVES ASSEMBLY - MCDA
  • MCDA
Available
14.1.2.2.- VITESSES
MCDA

Équipement de Montage de Transmission Combiné

The Unit to Study Combined Drives Assembly, "MCDA", allows carrying out advanced exercises and provides an understanding of the significant components and arrangements of the mechanical drive technology. With this unit, practices can be carried...
UNIT TO STUDY GEAR TRAIN ASSEMBLY - MGTA
  • MGTA
Available
14.1.2.2.- VITESSES
MGTA

Équipement d'Assemblage de Train

The Unit to Study Gear Train Assembly, "MGTA", allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the technique of mechanical...
GEAR GENERATION UNIT - MGE
  • MGE
Available
14.1.2.2.- VITESSES
MGE

Crémaillère

The Gear Generation Unit, "MGE", has been designed by EDIBON to study rack and pinion systems. With this unit the student can draw by an easy procedure the profile of a tooth, produced by the involute process of the rack when passing over the...
GEARED LIFTING UNIT - MEE
  • MEE
Available
14.1.2.2.- VITESSES
MEE

Équipement à Engrenage Surélevé

The Geared Lifting Unit, "MEE", has been designed to study a simple lifting mechanism and its use to determine the speed ratio, its mechanical advantages and efficiency.The unit is mounted on a metal structure with bearings that support the gear...
GEARED STUDY UNIT - MESE-T
  • MESE-T
Available
7.1.2.2.- VITESSES
MESE-T

Unité d'Étude des Engrenages

The Geared Study Drive Unit, "MESE", has been designed to dynamically study different gears, including a standard three shaft gear trainfor study, which can be modified with a simple setting to obtain a simple transmission.For the dynamic study...