14.- GÉNIE BIOMÉDICAL

La Génie Biomédical étudie la mise en œuvre des connaissances en ingénierie dans le domaine de la biologie et de la médecine. La combinaison de instrumentation et de systèmes de contrôle électronique et l'application d'algorithmes mathématiques et de principes physiques et chimiques permettent à Génie biomédical d'étudier et de développer de nouvelles techniques et de nouveaux dispositifs pour la résolution de problèmes cliniques. Cette discipline va de la conception d'éléments de diagnostic et de logiciels médicaux aux outils d'analyse physiologique pour l'étude du cœur ou du système de rendez-vous .

Voir plus

La Génie Biomédical a évolué au fil des ans grâce aux progrès scientifiques et technologiques. Actuellement, des dispositifs tels que les systèmes de surveillance des signes vitaux ou les dispositifs de diagnostic facilitent le travail de soins médicaux. Le développement de méthodes d'analyse d'images telles que rayons X, ultrasons et résonance magnétique permettent d'étudier l'organisme humain de manière claire et rapide. En outre, les logiciels de gestion hospitalière télémédecine et hôpital sont utilisés.

Le futur du génie biomédical a encore un long chemin à parcourir, car la société actuelle exige des solutions médicales rapides et efficaces. Les appareils électroniques utilisés au quotidien permettront de suivre les valeurs des signes vitaux du patient à distance, de pouvoir analyser les symptômes avant un problème de santé et, même, de prévenir ce problème éventuel. Une autre tendance du génie biomédical est la simplification des outils de laboratoire. Des systèmes, tels que Lab On a Chip (LOC), intègrent les fonctions de laboratoire dans une seule puce. De nouvelles techniques robotiquechirurgie, de nouveaux matériaux organiques pour la fabrication de tissus artificiels et de tissus régénératifs ou l'impression en 3D d'organes artificiels permettront de répondre aux besoins médicaux futurs.

Voir les produits
Matériels Associés
SOUS-CATÉGORIES DE GÉNIE BIOMÉDICAL

14.1.- BIOMECANIQUE

Biomécanique étudie la mécanique du mouvement de l'organisme des êtres vivants, parmi lesquels le mouvement du corps humain humain. Cette étude va des mouvements les plus simples de la vie quotidienne, comme le travail ou l'activité sportive, au mouvement de certains organes internes, comme le...
Voir

14.2.- ÉLECTRONIQUE BIOMÉDICAL

Biomedical Engineering étudie l'application des connaissances en ingénierie dans le domaine de la biologie et de la médecine. L'un des domaines les plus pertinents de cette ingénierie est le domaine de l'électronique biomédicale, dans lequel les concepts de l'électronique sont appliqués pour le...
Voir

14.3.- ÉQUIPEMENT BIOMÉDICAL

Équipement Biomédical est l'ensemble des instruments utilisés dans le domaine de la médecine, biologie et pharmacologie. La conception de l'équipement biomédical est directement liée à l'instrumentation biomédicale, dans laquelle les instruments sont conçus pour obtenir des informations,...
Voir
PRODUITS DE GÉNIE BIOMÉDICAL
Affichage 73-96 de 181 article(s)
THREE-HINGED ARCH UNIT - MART
  • MART
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MART
Unité d'Arc à Trois Articulations
L'unité Arche à trois charnières, "MART", permet à l'étudiant de se familiariser avec les arches à trois charnières, de calculer les forces portantes (pour une charge ponctuelle, une charge uniformément répartie et une charge mobile), d'étudier...
UNIT FOR STUDYING FORCES IN AN OVERDETERMINATE TRUSS - MFCS2
  • MFCS2
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MFCS2
Unité d'Étude de Forces dans Treillis Hyperstatiques
The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in the single plane...
UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3
  • MFCS3
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MFCS3
Unité d'Étude de la Déformation dans Treillis
The Unit for studying Deformation of Trusses, "MFCS3", allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the experimental forces in the...
TWO HINGED ARCH UNIT - MFL
  • MFL
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MFL
Unité de Deux Arches Articulées
The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...
PORTAL FRAME UNIT - MPO
  • MPO
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MPO
Unité de Structure en Portique
The Portal Frame Unit, "MPO", allows to perform vertical deflection and horizontal deflection measurements in a fixed rectangular portal frames.To carry out the deflection tests, a series of loads with different weight must be applied to the...
STRESS HYPOTHESES UNIT - STH
  • STH
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
STH
Unité d'Hypothèses de Contraintes
The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...
SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE
  • MEPE
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MEPE
Unité d'Etude de Problèmes de Stabilité Simples
The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...
UNIT TO STUDY STRESS ON A MEMBRANE - SSM
  • SSM
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
SSM
Unité pour l'Étude de Tenions dans une Membrane
The Unit to Study Stress on a Membrane, "SSM", designed by EDIBON, allows the study of stresses and deformations in a thin disc or membrane subjected to different compressive stresses.The main element of the equipment is a thin disc or membrane...
UNSYMMETRICAL CANTILEVER UNIT - MVV
  • MVV
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MVV
Unité de Porte à Faux Asymétrique
The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...
DEFLECTION OF CURVED BARS UNIT - MDB
  • MDB
Available
7.3.2.1.- TEST MÉCANIQUE
MDB
Unité de Déviation des Barres Incurvées
The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- TEST MÉCANIQUE
MFV
Unité de Déviation en Poutres
L'Unité de Déviation en Poutres, "MFV" a été conçue pour permettre aux étudiants d'observer et d'étudier les phénomènes suivants dans les poutres simplement appuyées et les poutres en porte-à-faux :Relation entre les flèches et les charges...
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- TEST MÉCANIQUE
MFLT
Unité de Flambement des Jambes de Force
The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- TEST MÉCANIQUE
MUP
Unité de Flambage Universelle
The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF
  • MMF
Available
7.3.2.1.- TEST MÉCANIQUE
MMF
Unité Force de cisaillement et de Moment de Flexion
The Shear Force and Bending Momentum Unit, "MMF", unit is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the application of one...
COMPUTER CONTROLLED PHOTOELASTICITY UNIT - EFOC
  • EFOC
Available
7.3.1.- PHOTOÉLASTICITÉ ET MESURE DE DÉFORMATION
EFOC
Unité de Photoélasticité, Contrôlée par Ordinateur (PC)
Unité de pratique de la photoélasticité, illustrant les sujets de la théorie de la photoélasticité, de la théorie de l'élasticité, de la résistance des matériaux et de la théorie de la structure.Il convient parfaitement à l'introduction et à...
PHOTOELASTICITY UNIT - EFO
  • EFO
Available
7.3.1.- PHOTOÉLASTICITÉ ET MESURE DE DÉFORMATION
EFO
Unité de Photoélasticité
Unité de pratique de la photoélasticité, illustrant les sujets de la théorie de la photoélasticité, de la théorie de l'élasticité, de la résistance des matériaux et de la théorie de la structure. Il convient parfaitement à l'introduction et à...
STRAIN GAUGE TRAINING UNIT - MEGE
  • MEGE
Available
7.3.1.- PHOTOÉLASTICITÉ ET MESURE DE DÉFORMATION
MEGE
Unité de Formation sur la Jauge de Contrainte
L'Unité de Formation sur la Jauge de Contrainte, "MEGE", propose une introduction aux fondamentaux de la mesure par jauges de contrainte, pour comparer le fonctionnement des jauges de contrainte à résistance et la manière dont elles mesurent les...
PHOTOELASTIC STRESS DEMONSTRATION UNIT - PSD
  • PSD
Available
7.3.1.- PHOTOÉLASTICITÉ ET MESURE DE DÉFORMATION
PSD
Unité de Démonstration des Contraintes Photoélastiques
The Photoelastic Stress Demonstration Unit, "PSD", consists of a frame on which the test specimens are placed. The specimens are made of a special transparent material that has a double optical refraction effect under the action of a mechanical...
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- TEST MÉCANIQUE
EEU/20KN
Unité d' Essai Universel
The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...
Demander des informations