7.3.- INGÉNIERIE DES MATÉRIAUX

Ingénierie des matériaux est la branche scientifique et industrielle chargée de faire une interprétation industrielle de la science des matériaux. Anthropologiquement, les différentes étapes du développement humain ont été classées en fonction des matériaux utilisés dans la fabrication des outils (âge de la pierre, âge du bronze, etc.). Ainsi, le développement de l'humanité est intimement lié à l'étude des nouveaux matériaux.

Voir plus

Au cours des 200 dernières années, des découvertes sur les matériaux, aussi révélatrices que la contribution de Gibbs, ont été faites. Il a démontré l'existence d'une relation entre les propriétés d'un matériau et sa structure. Ces découvertes ont permis le développement de nouveaux matériaux, tels que graphene, et l'investigation de nouveaux domaines, tels que nanomatériaux ou nanotechnologie.

Un très grand nombre de tests ont été effectués pour atteindre ce niveau de développement, notamment des tests de flexion mécanique, durabilité (Rockell, Brinell, Vickers, Martens), essais de torsion, essai de traction (ténacité et résilience), essai de traction (fluage), essai de cisaillement, ainsi que essais chimiques (traitements thermiques, structures internes, etc.). De même, les matériaux peuvent être classés comme suit:

  • Métal (ferreux et non ferreux)
  • Céramique
  • Polymères (thermoplastiques, plastiques thermodurcissables et élastomères)
  • Matériaux composites

Les applications de ces progrès sont évidentes dans différents domaines industriels, tels que les domaines automobile, électronique, aéronautique, et biomédical, donnant ainsi à l'ingénierie des matériaux l'importance qu'elle a dans la société actuelle.

Voir les produits
Matériels Associés
PRODUITS DE INGÉNIERIE DES MATÉRIAUX
Affichage 1-29 de 29 article(s)
COMPUTER CONTROLLED PHOTOELASTICITY UNIT - EFOC
  • EFOC
Available
7.3.1.- PHOTOÉLASTICITÉ ET MESURE DE DÉFORMATION
EFOC
Unité de Photoélasticité, Contrôlée par Ordinateur (PC)
Unité de pratique de la photoélasticité, illustrant les sujets de la théorie de la photoélasticité, de la théorie de l'élasticité, de la résistance des matériaux et de la théorie de la structure.Il convient parfaitement à l'introduction et à...
PHOTOELASTICITY UNIT - EFO
  • EFO
Available
7.3.1.- PHOTOÉLASTICITÉ ET MESURE DE DÉFORMATION
EFO
Unité de Photoélasticité
Unité de pratique de la photoélasticité, illustrant les sujets de la théorie de la photoélasticité, de la théorie de l'élasticité, de la résistance des matériaux et de la théorie de la structure. Il convient parfaitement à l'introduction et à...
STRAIN GAUGE TRAINING UNIT - MEGE
  • MEGE
Available
7.3.1.- PHOTOÉLASTICITÉ ET MESURE DE DÉFORMATION
MEGE
Unité de Formation sur la Jauge de Contrainte
L'Unité de Formation sur la Jauge de Contrainte, "MEGE", propose une introduction aux fondamentaux de la mesure par jauges de contrainte, pour comparer le fonctionnement des jauges de contrainte à résistance et la manière dont elles mesurent les...
PHOTOELASTIC STRESS DEMONSTRATION UNIT - PSD
  • PSD
Available
7.3.1.- PHOTOÉLASTICITÉ ET MESURE DE DÉFORMATION
PSD
Unité de Démonstration des Contraintes Photoélastiques
The Photoelastic Stress Demonstration Unit, "PSD", consists of a frame on which the test specimens are placed. The specimens are made of a special transparent material that has a double optical refraction effect under the action of a mechanical...
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- TEST MÉCANIQUE
EEU/20KN
Unité d' Essai Universel
The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...
BRINELL HARDNESS TESTING UNIT - EEDB
  • EEDB
Available
7.3.2.1.- TEST MÉCANIQUE
EEDB
Unité pour l'Essai de Dureté Brinell
The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...
CREEP TESTING UNIT - EEFCR
  • EEFCR
Available
7.3.2.1.- TEST MÉCANIQUE
EEFCR
Unité pour l'Essai de Fluage
The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...
COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC
  • EEFC
Available
7.3.2.1.- TEST MÉCANIQUE
EEFC
Unité d'Essai de Fatigue, Contrôlée par Ordinateur (PC)
L'Unité d'Essai de Fatigue, Contrôlée par Ordinateur (PC), "EEFC", conçue par EDIBON, permet d'étudier la résistance à la fatigue des matériaux. Pour ce faire, des essais de fatigue sont réalisés avec différents matériaux et entailles.En option,...
FATIGUE TESTING UNIT - EEF
  • EEF
Available
7.3.2.1.- TEST MÉCANIQUE
EEF
Unité d'Essai de Fatigue
L'Unité d’Essai de Fatigue, "EEF", conçue par EDIBON, permet d'étudier la résistance à la fatigue des matériaux. Pour ce faire, des essais de fatigue sont réalisés avec différents matériaux et entailles.En option, avec l'élément supplémentaire...
CHARPY AND IZOD IMPACT TESTING UNIT - EEICI
  • EEICI
Available
7.3.2.1.- TEST MÉCANIQUE
EEICI
Unité pour l'Essai des Impacts Charpy et Izod
L'Unité pour l’Essai des Impacts Charpy et Izod, "EEICI", se compose d'un pendule supporté par des roulements avec un bras de 330 mm de long et un système de fixation dans la position initiale de l'essai. Le marteau approprié pour l'essai Charpy...
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- TEST MÉCANIQUE
MUP
Unité de Flambage Universelle
The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- TEST MÉCANIQUE
MFLT
Unité de Flambement des Jambes de Force
The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- TEST MÉCANIQUE
MEBM
Unité de Modes de Flambage d'Euler
With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
TORSION AND BEND UNIT - MTP
  • MTP
Available
7.3.2.1.- TEST MÉCANIQUE
MTP
Unité de Torsion et de Flexion
The Torsion and Bend Unit, "MTP", is a combined apparatus for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate its transport...
TORSION UNIT - MTB
  • MTB
Available
7.3.2.1.- TEST MÉCANIQUE
MTB
Unité de Torsion
The Torsion Unit, "MTB", allows to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a metallic rod is fastened by...
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- TEST MÉCANIQUE
MTT
Unité d'Essai de Torsion (30Nm)
To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- TEST MÉCANIQUE
MTTU
Unité de Testeur de Traction
With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...
DEFLECTION OF CURVED BARS UNIT - MDB
  • MDB
Available
7.3.2.1.- TEST MÉCANIQUE
MDB
Unité de Déviation des Barres Incurvées
The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- TEST MÉCANIQUE
MFV
Unité de Déviation en Poutres
L'Unité de Déviation en Poutres, "MFV" a été conçue pour permettre aux étudiants d'observer et d'étudier les phénomènes suivants dans les poutres simplement appuyées et les poutres en porte-à-faux :Relation entre les flèches et les charges...
SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF
  • MMF
Available
7.3.2.1.- TEST MÉCANIQUE
MMF
Unité Force de cisaillement et de Moment de Flexion
The Shear Force and Bending Momentum Unit, "MMF", unit is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the application of one...
BELL CASTING BASIC TRAINING SET - MCAM
  • MCAM
Available
7.3.3.1.- FONDERIE
MCAM
Fonderie, Ensemble basique de Modèle de Cloche
Didactic case for the study of foundry fundamentals.Introduction to sand casting: student experiments with three different patterns (bell, anvil and anchor).Operations of ramming up of the moulding sand, melting of the metal, pouring, forming and...
FOUNDRY, BUILDING-UP TRAINING SET 1 - MCLA
  • MCLA
Available
7.3.3.1.- FONDERIE
MCLA
Fonderie : Ensemble 1 de Formation de Construction
Didactic case for the study of foundry fundamentals.Operations of ramming up of the moulding sand, melting of the metal, pouring, forming and fettling can be performed step by step.Practice of melting, unmelting and foundry with irregular and...
Demander des informations