Best sellers
Showing 685-720 of 950 item(s)
12 24 36
PASCAL'S PRINCIPLE DEMONSTRATION - FME33
  • FME33
Available
8.1.3.- HYDROSTATICS
FME33
Pascal's Principle Demonstration
The Pascal's Principle Demonstration unit, "FME33", designed by EDIBON, allows to demonstrate Pascal's principle, i.e. that the pressure in an incompressible fluid is independent of the column size section but depends only on its height (liquid...
View Unit
PELTON TURBINE - FME16
  • FME16
Available
8.1.7.- HYDRAULIC MACHINES: TURBINES
FME16
Pelton Turbine
The Pelton Turbine unit, "FME16", designed by EDIBON, allows the study of the characteristics of the tangential wheels or pressure turbines commonly used to produce electricity in hydroelectric plants to exploit large hydraulic jumps of low...
View Unit
PELTON TURBINE MODEL - HT-P
Available
8.7.3.- TURBINES
HT-P
Pelton Turbine Model
Accessory of HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
View Unit
PEM FUEL CELL ADVANCED UNIT - EC6B
  • EC6B
Available
5.3.9.- HYDROGEN FUEL CELLS
EC6B
PEM Fuel Cell Advanced Unit
The PEM Fuel Cell Advanced Unit, "EC6B", has been designed by EDIBON to allow the students to understand the fuel cells technology, especially that of a proton exchange membrane fuel cell (PEM). It also enables to calculate several fundamental...
View Unit
PEM FUEL CELL UNIT - EC5B
  • EC5B
Available
5.3.9.- HYDROGEN FUEL CELLS
EC5B
PEM Fuel Cell Unit
The PEM Fuel Cell Unit, "EC5B", has been designed by EDIBON to allow the students to understand the fuel cells technology, specially that of a proton exchange membrane fuel cell (PEM). It also enables to calculate several fundamental parameters of...
View Unit
PERMEABILITY/FLUIDISATION STUDIES UNIT - PEFP
  • PEFP
Available
11.1.1.- FLUIDIZATION
PEFP
Permeability/Fluidisation Studies Unit
The Permeability/Fluidisation Studies Unit, "PEFP", designed by EDIBON, allows to observe the behaviour of liquid fluidisation in a granular bed.The main element is a permeability meter. It is a transparent cylinder that supports the soil sample...
View Unit
PHOTOELASTIC STRESS DEMONSTRATION UNIT - PSD
  • PSD
Available
7.3.1.- PHOTOELASTICITY AND STRAIN MEASUREMENT
PSD
Photoelastic Stress Demonstration Unit
The Photoelastic Stress Demonstration Unit, "PSD", consists of a frame on which the test specimens are placed. The specimens are made of a special transparent material that has a double optical refraction effect under the action of a mechanical...
View Unit
PHOTOELASTICITY UNIT - EFO
  • EFO
Available
7.3.1.- PHOTOELASTICITY AND STRAIN MEASUREMENT
EFO
Photoelasticity Unit
The Photoelasticity Unit, "EFO", has been designed by EDIBON for photoelasticity practices, illustrating the subjects of the photoelasticity theory, the elasticity theory, strength of materials, and structure theory.It is very suitable for the...
View Unit
PHOTOVOLTAIC APPLICATION WITH CONNECTION TO GRID - AEL-PHVG
  • AEL-PHVG
Available
5.3.1.- PHOTOVOLTAIC SOLAR ENERGY
AEL-PHVG
Photovoltaic Application with Connection to Grid
The Photovoltaic Application with Connection to Grid, "AEL-PHVG", has been designed by EDIBON to study the energy production by photovoltaic panels and how this energy is injected to the grid.In order to learn about solar energy production, the...
View Unit
PHOTOVOLTAIC ENERGY POWER PLANT - PWP-PE
Available
5.2.- MICROGRIDS
PWP-PE
Photovoltaic Energy Power Plant
Accessory of AEL-MGP
The Photovoltaic Energy Power Plant, PWP-PE, designed by EDIBON, allows for the study of photovoltaic power plants within the context of microgrids.It consists of a three-phase inverter fed with a photovoltaic panel array simulator. The user will...
View Unit
PHOTOVOLTAIC SOLAR ENERGY MODULAR UNIT (BASIC VERSION) - MINI-EESF/B
  • MINI-EESF/B
Available
5.3.1.- PHOTOVOLTAIC SOLAR ENERGY
MINI-EESF/B
Photovoltaic Solar Energy Modular Unit (Basic Version)
The Photovoltaic Solar Energy Modular Unit (Basic Version), "MINI-EESF/B", is a laboratory scaled unit designed to study all the parameters involved in the solar radiation direct conversion into electricity.The unit is based on some application...
View Unit
PHOTOVOLTAIC SOLAR ENERGY MODULAR UNIT (COMPLETE VERSION) - MINI-EESF
  • MINI-EESF
Available
5.3.1.- PHOTOVOLTAIC SOLAR ENERGY
MINI-EESF
Photovoltaic Solar Energy Modular Unit (Complete Version)
Photovoltaic Solar Energy Modular Unit (Complete Version), "MINI-EESF", is a laboratory scaled unit designed to study all the parameters involved in the solar radiation direct conversion into electricity. The unit is based on some application...
View Unit
PHOTOVOLTAIC SOLAR ENERGY MODULAR UNIT (INTERMEDIATE VERSION) - MINI-EESF/M
  • MINI-EESF/M
Available
5.3.1.- PHOTOVOLTAIC SOLAR ENERGY
MINI-EESF/M
Photovoltaic Solar Energy Modular Unit (Intermediate Version)
Photovoltaic Solar Energy Modular Unit (Intermediate Version), "MINI-EESF/M", is a laboratory scaled unit designed to study all the parameters involved in the solar radiation direct conversion into electricity.The unit is based on some application...
View Unit
PHOTOVOLTAIC SOLAR ENERGY UNIT - EESFB
  • EESFB
Available
5.3.1.- PHOTOVOLTAIC SOLAR ENERGY
EESFB
Photovoltaic Solar Energy Unit
The sun provides a wide spectrum of solar power. With the exception of the light we see around us every day, the rest of the solar power is invisible. Other parts of the spectrum consist of cosmic beams, gamma rays, x-rays, ultraviolet light,...
View Unit
PHOTOVOTAIC SYSTEMS APPLICATION IN ISOLATED AND PARALLEL GRIDS - AEL-PHIP
  • AEL-PHIP
Available
5.3.1.- PHOTOVOLTAIC SOLAR ENERGY
AEL-PHIP
Photovotaic Systems Application in Isolated and Parallel Grids
The Photovoltaic Systems Application in Isolated and Parallel Grids, "AEL-PHIP", has been designed by EDIBON to study the operations carried out in photovoltaic power systems which operate isolated from the national energy grid (island operation)...
View Unit
PID CONTROL AND REGULATION FUNDAMENTALS UNIT - RYC/B
  • RYC/B
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC/B
PID Control and Regulation Fundamentals Unit
The regulation of dynamic systems is a fundamental component of engineering, as it allows process variables to be maintained within desired limits despite external disturbances or internal changes. To achieve this, control strategies such as the...
View Unit
PID CONTROL AND REGULATION OF AN INVERTED PENDULUM UNIT - RYC-PI
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-PI
PID Control and Regulation of an Inverted Pendulum Unit
Accessory of RYC, RYC/T
The PID Control and Regulation of an Inverted Pendulum Unit, "RYC-PI", de­signed by EDIBON, allows studying a highly unstable process through the control of an inverted pendulum mounted on a moving carriage. It includes position and angle sensors...
View Unit
PID CONTROL AND REGULATION OF PH LEVEL UNIT - RYC-pH
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-pH
PID Control and Regulation of pH Level Unit
Accessory of RYC, RYC/T
The PID Control and Regulation of pH Level Unit, "RYC-pH", designed by EDIBON, allows studying pH control in a tank by dosing acidic and basic solutions. It includes pH sensors, dosing pumps, and a mixing tank. It allows analyzing dynamic chemical...
View Unit
PID CONTROL AND REGULATION OF PRESSURE LEVEL UNIT - RYC-P
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-P
PID Control and Regulation of Pressure Level Unit
Accessory of RYC, RYC/T
The PID Control and Regulation of Pressure Level Unit, "RYC-P", designed by EDIBON, allows the study of pressure control in a tank using compressed air. It includes a compressor, pressure sensors, and control valves. It allows analyzing the...
View Unit
PID FLOW CONTROL AND REGULATION UNIT - RYC-C
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-C
PID Flow Control and Regulation Unit
Accessory of RYC, RYC/T
The PID Flow Control and Regulation Unit, "RYC-C", designed by EDIBON, allows the study of flow control in a closed hydraulic circuit. It includes a pump, a flowmeter, and an electronic proportional valve that regulates the flow. The unit allows...
View Unit
PID LEVEL CONTROL AND REGULATION UNIT - RYC-N
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-N
PID Level Control and Regulation Unit
Accessory of RYC, RYC/T
The PID Level Control and Regulation Unit, "RYC-N", designed by EDIBON, allows studying level control in a tank by regulating the inlet flow. It includes level sensors, a pump, and valves that allow modifying operating conditions. The unit allows...
View Unit
PID MAGNETIC LEVITATION CONTROL AND REGULATION UNIT - RYC-CLM
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-CLM
PID Magnetic Levitation Control and Regulation Unit
Accessory of RYC, RYC/T
The PID Magnetic Levitation Control and Regulation Unit, "RYC-CLM", desig­ned by EDIBON, allows studying a highly nonlinear process through the levitation of a metallic ball using an electromagnet. It includes position and current sensors that...
View Unit
PID POSITION CONTROL AND REGULATION OF A MOTOR UNIT - RYC-CP
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-CP
PID Position Control and Regulation of a Motor Unit
Accessory of RYC, RYC/T
The PID Position Control and Regulation of a Motor Unit, "RYC-CP", designed by EDIBON, allows studying linear position control using a DC motor that moves a carriage. It includes position sensors that allow measuring the displacement of the...
View Unit
PID TEMPERATURE CONTROL AND REGULATION OF AIR FLOW UNIT - RYC-TAR
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-TAR
PID Temperature Control and Regulation of Air Flow Unit
Accessory of RYC, RYC/T
The PID Temperature Control and Regulation of Air Flow Unit, "RYC-TAR", designed by EDIBON, allows studying temperature control in an air flow using a fan and a heating element. It includes sensors distributed along the duct, allowing analysis of...
View Unit
PID TEMPERATURE CONTROL AND REGULATION UNIT - RYC-TE
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-TE
PID Temperature Control and Regulation Unit
Accessory of RYC, RYC/T
The PID Temperature Control and Regulation Unit, "RYC-TE", designed by EDI­BON, allows studying temperature control in a tank using a heating element and temperature sensors. It allows analyzing thermal dynamics, response time, and process stability.
View Unit
PILOT PLANT FOR CEREAL MALTING - CE00/MA
  • CE00/MA
Available
PILOT PLANTS FOR CEREALS
CE00/MA
Pilot Plant for Cereal Malting
The Pilot Plant for Cereal Malting, "CE00/MA", is a pilot scale plant that includes all the industrial stages for malt production.This plant includes a steeping tank, a germinator, a dryer-roaster and a deculmer. In addition, it includes the...
View Unit
PILOT PLANT FOR CO2 ADSORPTION CAPTURE - EDIBON-MOF4AIR
  • EDIBON-MOF4AIR
Available
ENVIRONMENT
EDIBON-MOF4AIR
Pilot Plant for CO2 Adsorption Capture
The Pilot Plants for CO₂ Capture via Adsorption, "EDIBON-MOF4AIR" seek a new solution to efficiently capture carbon dioxide from power plants and industries. To address this significant issue we currently face, the European Union launched the...
View Unit
PILOT PLANT FOR CONCENTRATED JUICE PRODUCTION - FR00/JC
  • FR00/JC
Available
PILOT PLANTS FOR FRUITS, VEGETABLES, AND LEGUMES
FR00/JC
Pilot Plant for Concentrated Juice Production
The Pilot Plant for Concentrated Juice Production, "FR00/JC", is a scale size pilot-plant equipped to carry out all industrial stages of concentrated juice production.In the production plant of concentrate juices, the process begins with the...
View Unit
PILOT PLANT FOR FRUIT JAM PRODUCTION - FR00/FJ
  • FR00/FJ
Available
PILOT PLANTS FOR FRUITS, VEGETABLES, AND LEGUMES
FR00/FJ
Pilot Plant for Fruit Jam Production
The Pilot Plant for Fruit Jam Production, "FR00/FJ", is a pilot-scale pilot plant equipped to carry out all the industrial stages for jam production.In the production plant of fruit jam, the process begins with the reception of fresh fruit, where...
View Unit
PILOT PLANT FOR FRUIT PUREES AND PULPS PRODUCTION - FR00/PJ
  • FR00/PJ
Available
PILOT PLANTS FOR FRUITS, VEGETABLES, AND LEGUMES
FR00/PJ
Pilot Plant for Fruit Purees and Pulps Production
The Pilot Plant for Juice Production, "FR00/JP", is a pilot-scale facility that includes all the industrial stages for purees production.In the production plant of fruit purees, the process begins with the reception of fresh fruit, where a...
View Unit
PILOT PLANT FOR MILLING AND FLOUR PRODUCTION - CE00/MF
  • CE00/MF
Available
PILOT PLANTS FOR CEREALS
CE00/MF
Pilot Plant for Milling and Flour Production
The Computer Controlled and Touch Screen Cereal Pilot Plants, "CE00", are a set of pilot plants capable of carrying out the main processes involved in the treatment of cereal grains, including grain milling, bread and pasta making, and cereal...
View Unit
PILOT PLANT FOR THE PRODUCTION OF BREAD - CE00/B
  • CE00/B
Available
PILOT PLANTS FOR CEREALS
CE00/B
Pilot Plant for the Production of Bread
The Computer Controlled and Touch Screen Cereal Pilot Plants, "CE00", are a set of pilot plants capable of carrying out the main processes involved in the treatment of cereal grains, including grain milling, bread and pasta making, and cereal...
View Unit
PILOT PLANT FOR THE PRODUCTION OF CHEESE AND COTTAGE - LE00/CC
  • LE00/CC
Available
PILOT PLANTS FOR DAIRY PRODUCTS
LE00/CC
Pilot Plant for the Production of Cheese and Cottage
The Computer Controlled and Touch Screen Pilot Plants for the Production of Dairy Products, are pilot plants capable of demonstrating, for further research and study, the main processes involved in the dairy treatment industry. That is, from the...
View Unit
Ask for information