4.4.- INSTALLATIONS AND MAINTENANCE

The needs of today's society are a challenge for any industry, since they have to be in continuous evolution and renewal to adapt to those needs.

View more

In recent years, as a result of the new industrial revolution or Industry 4.0, the emergence of the Industrial Internet of Things (IIoT) and the Smart Factories, that adaptation is possible thanks to the application of the most sophisticated techniques in the design of new facilities or in the renovation of existing ones.

In spite of all these technological advances and the exhaustive controls carried out, it should not be forgotten that any element that take part in the productive process is going to be subjected to a mechanical and electrical wear (efforts, loads, etc.) and its useful life is limited. To avoid catastrophic failures, stoppages in production or any type of process that implies an increase of non-productive times and, therefore, an increase of costs, it is extremely important to carry out a good maintenance of machinery, electrical systems, etc.

Traditionally, only two types of maintenance were considered:

    • Corrective: the fault is solved once it has already occurred.
    • Preventive: periodic review of all those problematic elements and their replacement if required.

These types of maintenance involve very high and unnecessary costs in most cases. Nowadays, thanks to the available technology, it is possible to carry out predictive maintenance consisting of a comprehensive analysis of all those variables that take part in all the components of a system and be able to replace them at the right time.

But, if more control over the failures that can suffer all those mechanical components subject to wear is preferred, there is another type of maintenance, known as proactive maintenance. It goes one step further than the predictive maintenance, looking for the root of the problem.

View Products
INSTALLATIONS AND MAINTENANCE UNITS
Showing 1-30 of 41 item(s)
CUTAWAY 3PH WOUND MOTOR - EMT8-S
  • EMT8-S
Available
4.4.1.- CUTAWAY MODELS
EMT8-S

Cutaway 3PH Wound Motor

It includes a Cut away asynchronous three-phase motor with wound rotor (EMT8-S) in order to study the different parts of this motor type.
CUTAWAY UNIVERSAL MOTOR - EMT12-S
  • EMT12-S
Available
4.4.1.- CUTAWAY MODELS
EMT12-S

Cutaway Universal Motor

It includes a Cut away universal motor (EMT12-S) in order to study the different parts of this motor type.
CUTAWAY DC BRUSHLESS MOTOR - EMT18-S
  • EMT18-S
Available
4.4.1.- CUTAWAY MODELS
EMT18-S

Cutaway DC brushless motor

It includes a Cut away DC Brushless motor (EMT18-S) in order to study the different parts of this motor type.
CUTAWAY STEPPER MOTOR - EMT19-S
  • EMT19-S
Available
4.4.1.- CUTAWAY MODELS
EMT19-S

Cutaway stepper motor

It includes a Cut away stepper motor (EMT19-S) in order to study the different parts of this motor type.
CUTAWAY 3PH RELUCTANCE MOTOR - EMT21-S
  • EMT21-S
Available
4.4.1.- CUTAWAY MODELS
EMT21-S

Cutaway 3PH Reluctance Motor

It includes a Cut away three-phase reluctance motor (EMT21-S) in order to study the different parts of this motor type.
CUTAWAY 1PH SHADED POLE MOTOR - EMT22-S
  • EMT22-S
Available
4.4.1.- CUTAWAY MODELS
EMT22-S

Cutaway 1PH shaded pole motor

It includes a Cut away single-phase shaded pole motor (EMT22-S) in order to study the different parts of this motor type.
THREE-PHASE TRANSFORMER CONSTRUCTION APPLICATION - AEL-TPTC
  • AEL-TPTC
Available
4.4.2.- DETACHABLE MODELS
AEL-TPTC

Three-Phase Transformer Construction Application

The Three-Phase Transformer Construction Kit “AEL-TPTC” has been designed to show the students how a three-phase transformer is constructed step by step. This application is provided with different parts of a three-phase transformer and the...
DISSECTIBLE MOTORS-GENERATORS APPLICATION - AEL-DMG-KIT
  • AEL-DMG-KIT
Available
4.4.2.- DETACHABLE MODELS
AEL-DMG-KIT

Dissectible Motors-Generators Application

The Dissectible Motors-Generators Application, “AEL-DMG-KIT”, has been designed by EDIBON for the training at theoretical-practical level about the assembly of the following electric motors: DC Compound with Shunt-Series Motor-Generator,...
4 DISSECTIBLE INDUCTION MOTORS APPLICATION - AEL-DIM-KIT
  • AEL-DIM-KIT
Available
4.4.2.- DETACHABLE MODELS
AEL-DIM-KIT

4 Dissectible Induction Motors Application

The 4 Dissectible Induction Motors Application, ”AEL-DIM-KIT”, has been designed by EDIBON to demonstrate the students the assembly, dissectible and starting-up of several types of induction motors: the Three-Phase Induction Motor of Squirrel...
WIRING INSTALLATION TRAINING FOR AC AND DC MOTOR DRIVES - WIT-MDRV
  • WIT-MDRV
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING
WIT-MDRV

Wiring Installation Training for AC and DC Motor Drives

The Wiring Installation Training, AC and DC Motor Drivess application, "WIT-MDRV", has been designed by Edibon for the formation atprofessional-practical level in the field of electrical motors controllers.This application provides the future...
WIRING INSTALLATION TRAINING FOR WIND POWER SYSTEMS - WIT-WPS
  • WIT-WPS
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING
WIT-WPS

Wiring Installation Training for Wind Power Systems

The Wiring Installation Training for Wind Power System application, "WIT-WPS", has been designed by Edibon for the formation atprofessional-practical level in the field of the installations, wiring and commissioning of wind power energy...