7.1.2.- SIMPLE MACHINES

SIMPLE MACHINES UNITS
Showing 1-22 of 22 item(s)
SLIDER CRANK MECHANISM - MBD
  • MBD
Available
14.1.2.1.- MECHANISMS
MBD

Slider Crank Mechanism

The Slider Crank Mechanism, “MBD”, designed by EDIBON, is an example of slider-crank mechanism.This mechanism is made of aluminum and consists of a rotary element (graduated disc), called crank, connected to a rigid bar, calledconnecting rod. When...
SCOTCH YOKE MECHANISM - MYE
  • MYE
Available
14.1.2.1.- MECHANISMS
MYE

Scotch Yoke Mechanism

The Scotch Yoke Mechanism, "MYE", designed by EDIBON, is an example of slider-crank mechanism for converting the linear motion ofa slider into rotational motion or vice versa.It is made of aluminum and consists of a rotary element, called crank,...
SLOTTED LINK MECHANISM - MBM1
  • MBM1
Available
14.1.2.1.- MECHANISMS
MBM1

Slotted Link Mechanism

The Slotted Link Mechanism, “MBM1”, is an example of a quick-return mechanism, capable of transforming circular motion intoreciprocating motion. It is made of aluminum and consists of a rotary element (graduated disk), called crank, connected to a...
WHITWORTH QUICK RETURN MECHANISM - MBM2
  • MBM2
Available
14.1.2.1.- MECHANISMS
MBM2

Whitworth Quick Return Mechanism

The Whitworth Quick Return Mechanism, "MBM2", is a mechanism able to transform circular movement into reciprocating movement. It ismade of aluminum and consists of a rotary element, called crank, with a graduated disk, connected to a rigid bar,...
FOUR-BAR MECHANISM - MCA
  • MCA
Available
14.1.2.1.- MECHANISMS
MCA

Four-Bar Mechanism

The Four-Bar Mechanism, "MCA", designed by EDIBON, is a bench-top unit to perform laboratory experiments.It is made of anodized aluminum and consists of two rotary elements (graduated discs) mounted on ball bearings. The discs include a scaleto...
GENEVA STOP MECHANISM - MME
  • MME
Available
14.1.2.1.- MECHANISMS
MME

Geneva Stop Mechanism

The Geneva Stop Mechanism, “MME”, designed by EDIBON, is a mechanism that transforms continuous circular motion into intermittentmotion. It is a positive drive in which the driven wheel is positively moved or locked.It is made of aluminum and...
COUPLING MECHANISM - MAC
  • MAC
Available
14.1.2.1.- MECHANISMS
MAC

Coupling Mechanism

The Coupling Mechanism, "MAC", represents a simple Oldham type coupling. The lateral displacement of the input and output shafts maybe varied and circular scales are fitted to the input and output flanges.It consists of two outer discs made of...
HOOKE'S JOINT MECHANISM - MUN
  • MUN
Available
14.1.2.1.- MECHANISMS
MUN

Hooke's Joint Mechanism

The Hooke’s Joint Mechanism, "MUN", designed by EDIBON, represents a universal coupling, also called a U-joint, Hooke joint or Cardan joint. The Hooke joint is a universal mechanism that is often used to transmit rotary motion between two...
CAM AND FOLLOWER MECHANISM - MEX
  • MEX
Available
14.1.2.1.- MECHANISMS
MEX

Cam and Follower Mechanism

The Cam and Follower Mechanism, "MEX", allows to study the cam-follower and eccentric-follower mechanisms. For that purpose, several plate cam models, one eccentric and several roller-shaped and flat-shaped followers models are supplied.A plate...
CRANK MECHANISM - MBI
  • MBI
Available
14.1.2.1.- MECHANISMS
MBI

Crank Mechanism

The Crank Mechanism "MBI" is a unit designed to observe, study and record the motion of a crank and the forces involved in a simple engine mechanism. The piston is linearly displaced through a cylinder with the aid of a guide.Bearings are coupled...
ACKERMANN STEERING MECHANISM - MDA
  • MDA
Available
14.1.2.1.- MECHANISMS
MDA

Ackermann Steering Mechanism

The Ackermann Steering Mechanism, "MDA", is a bench-mounted unit designed to determine the lead angle of a steering trapezoid in an Ackermann steering mechanism, the disadvantages of incorrectly adjusted track rods and the influence of the track...
WINCH MECHANISM - MMEL
  • MMEL
Available
14.1.2.1.- MECHANISMS
MMEL

Winch Mechanism

The Winch Mechanism, “MMEL”, allows to study the lifting velocity and load transmission of a winch. Efficiency and load transmission can be determined by force equilibrium. The winch is equipped with a safety element to prevent reversal of...
BAR LINKAGES UNIT - MBLU
  • MBLU
Available
14.1.2.1.- MECHANISMS
MBLU

Bar Linkages Unit

The Bar Linkages Unit "MBLU" allows many experiments using different arrangements of their parts. The "MBLU" unit includes a selection of more than 20 perforated bars of different lengths and pivots or ‘joints’ to allow students to configure...
WORM AND WHEEL UNIT - MTSF
  • MTSF
Available
14.1.2.2.- GEARS
MTSF

Worm and Wheel Unit

The Worm and Wheel Unit, ,MTSF,, allows to demonstrate the principle of a worm gear.The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel.The worm and wheel are positioned a set distance...
ACCELERATION OF GEARED SYSTEM UNIT - MAE
  • MAE
Available
14.1.2.2.- GEARS
MAE

Acceleration of Geared System Unit

The Acceleration of Geared Systems Unit “MAE” allows to perform tests to calculate the moment of inertia of a gear train system.The MAE unit includes six gears. Two of them can have another position in the shafts to vary the gear ratio, allowing...
UNIT TO STUDY SIMPLE DRIVES ASSEMBLY - MSDA
  • MSDA
Available
14.1.2.2.- GEARS
MSDA

Unit to Study Simple Drives Assembly

The Unit to Study Simple Drives Assembly, "MSDA", allows the knowledge and learning of the fundamentals of the mechanical transmission technique, as well as the assembly, disassembly and experimentation with simple gears.The unit allows to carry...
UNIT TO STUDY COMBINED DRIVES ASSEMBLY - MCDA
  • MCDA
Available
14.1.2.2.- GEARS
MCDA

Unit to Study Combined Drives Assembly

The Unit to Study Combined Drives Assembly, "MCDA", allows carrying out advanced exercises and provides an understanding of the significant components and arrangements of the mechanical drive technology.With this unit, practices can be carried out...
UNIT TO STUDY GEAR TRAIN ASSEMBLY - MGTA
  • MGTA
Available
14.1.2.2.- GEARS
MGTA

Unit to Study Gear Train Assembly

The Unit to Study Gear Train Assembly, "MGTA", allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the technique of mechanical...
GEAR GENERATION UNIT - MGE
  • MGE
Available
14.1.2.2.- GEARS
MGE

Gear Generation Unit

The Gear Generation Unit, “MGE”, has been designed by EDIBON to study rack and pinion systems. With this unit the student can draw by an easy procedure the profile of a tooth, produced by the involute process of the rack when passing over the...
GEARED LIFTING UNIT - MEE
  • MEE
Available
14.1.2.2.- GEARS
MEE

Geared Lifting Unit

The Geared Lifting Unit, "MEE", has been designed to study a simple lifting mechanism and its use to determine the speed ratio, its mechanical advantages and efficiency.The unit is mounted on a metal structure with bearings that support the gear...
GEARED STUDY UNIT - MESE-T
  • MESE-T
Available
7.1.2.2.- GEARS
MESE-T

Geared Study Unit

The Geared Study Drive Unit, "MESE", has been designed to dynamically study different gears, including a standard three shaft gear trainfor study, which can be modified with a simple setting to obtain a simple transmission.For the dynamic study...
UNIT FOR THE KINEMATIC STUDY OF GEAR TRAINS - KSGT
  • KSGT
Available
7.1.2.2.- GEARS
KSGT

Unit for the Kinematic Study of Gear Trains

The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study. The cogwheels may be assembled on the axles in...