9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

Certain environmental conditions are needed in many life situations, for example, in an industrial environment, a house or a greenhouse. According to the requirements, the air parameters can be modified with the aid of specific equipment.

View more

Under normal conditions, the air has a mass content of around 23% oxygen, 76% nitrogen and 1% gases and vapors. Among the gases and vapors the most important is water vapor. Although its proportion is very small, it is very importance in the rate of evaporation of wet surfaces and materials.

The air conditioning and ventilation systems modify air humidity and other parameters, such as temperature and pressure.

As the air parameters are modified, water heating systems are used to obtain specific conditions.

In the everyday life, water can be heated for sanitation purposes (bathrooms, showers) and for other cleaning purposes or for heating. According to its later use, the water is conditioned with a heating system.

Sanitary water can be prepared in two ways:

  • By storage: hot water is stored in a tank for the intended uses.
  • By instantaneous heating: water flows through a coil heated directly by a flame or heat exchanger.

A heating system raises or maintains the air temperature. It consists of three parts:

  • A heat generation system: it can be a fuel boiler, a system operated by heating elements or another system.
  • A distribution system: pipes through which hot water or air flows.
  • An emission system: radiators, grilles, specific supply elements.

Any of the water heating methods, regardless of the use, must be evaluated, since the energy efficiency variability is very large.

View Products
HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER UNITS
Showing 1-24 of 24 item(s)
COMPUTER CONTROLLED HOT WATER PRODUCTION AND HEATING TEACHING UNIT - EACC
  • EACC
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
EACC
Computer Controlled Hot Water Production and Heating Teaching Unit
The main element of the Computer Controlled Hot Water Production and Heating Teaching Unit, "EACC", is the boiler. Its function is the heating of the water that will flow through the other elements transferring its heat. It is a low temperature...
COMPUTER CONTROLLED BIOMASS PROCESS UNIT - EBMC
  • EBMC
Available
5.3.7.- BIOFUELS
EBMC
Computer Controlled Biomass Process Unit
The main element of the unit is the biomass boiler, which will heat the water that will flow through the other components transferring its heat.The boiler is a biomass boiler of 16 kW that works with pellet and other granulated fuels. The body of...
BIOMASS PROCESS UNIT - EBMB
  • EBMB
Available
5.3.7.- BIOFUELS
EBMB
Biomass Process Unit
The main element of the unit is the biomass boiler, which will heat the water that will flow through the other components transferring its heat.The boiler is a biomass boiler of 16 kW that works with pellet and other granulated fuels. The body of...
COMPUTER CONTROLLED UNIT TO STUDY THE EFFICIENCY OF A HEATING SYSTEM - TEHSC
  • TEHSC
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TEHSC
Computer Controlled Unit to Study the Efficiency of a Heating System
The Computer Controlled Unit to Study the Efficiency of a Heating System, "TEHSC",designed by EDIBON allows for studying and analyzing a closed heating system made upof pipes with different diameter and fittings normally used in real heating...
WATER HEATERS TRAINING UNIT - WHT
  • WHT
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
WHT
Water Heaters Training Unit
The Water Heater Training Unit, "WHT", allows demonstrating the operation of three types of water heaters. The unit has three heaters, two of them commercial one with electronic ignition and one in millivolt, and a residential gas heater without...
HEAT PUMP FOR DIFFERENT HEAT SOURCES AND HEAT EXCHANGERS - HPSE
  • HPSE
Available
9.3.- HEAT PUMPS
HPSE
Heat Pump for different Heat Sources and Heat Exchangers
The Heat Pump for different Heat Sources and Heat Exchangers, "HPSE", represents the typical compressor compression refrigeration plant. The compressor is of the scroll type, which is a positive displacement compressor.The evaporator and condenser...
UNDERFLOOR HEATING AND/OR HEAT SOURCE FOR HEAT PUMP - UHHS
  • UHHS
Available
9.3.- HEAT PUMPS
UHHS
Underfloor Heating and/or Heat Source for Heat Pump
The Underfloor Heating and/or Heat Source for Heat Pump, "UHHS", designed by EDIBON, allows the visualization of a piping system that simulates a radiant floor heating system and its functions as a heat sink. It can also be used as a heat source...
FAN HEATER AND/OR AIR HEAT EXCHANGER - FHAH
  • FHAH
Available
9.3.- HEAT PUMPS
FHAH
Fan Heater and/or Air Heat Exchanger
The unit Fan Heater and/or Air Heat Exchanger, "FHAH", designed by EDIBON, allows the visualization of a fan heater and its functions as a heat sink. It can also be used as a heat source working in conjunction with a heat pump.The main component...
COMPUTER CONTROLLED AIR CONDITIONING LABORATORY UNIT - TAAC
  • TAAC
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TAAC
Computer Controlled Air Conditioning Laboratory Unit
The Computer Controlled Air Conditioning Laboratory Unit, "TAAC", has been designed to study the change of the air conditions and the refrigeration circuit.The unit consists of a testing tunnel made of stainless steel, in which there have...
AIR CONDITIONING LABORATORY UNIT - TAAB
  • TAAB
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TAAB
Air Conditioning Laboratory Unit
The Air Conditioning Laboratory Unit, "TAAB", has been designed to study the change of the air conditions and the refrigeration circuit. The unit consists of a testing tunnel made in stainless steel, in which there have installed two windows....
COMPUTER CONTROLLED RECIRCULATING AIR CONDITIONING UNIT - TARC
  • TARC
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TARC
Computer Controlled Recirculating Air Conditioning Unit
The Computer Controlled Recirculating Air Conditioning Unit, "TARC", has been designed to study both the changes in the air conditions and the refrigeration circuit. For that purpose, temperature sensors, pressure sensors and flow meters have been...
RECIRCULATING AIR CONDITIONING UNIT - TARB
  • TARB
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TARB
Recirculating Air Conditioning Unit
The Recirculating Air Conditioning Unit, "TARB", has been designed to study both the changes in the air conditions and the refrigeration circuit. For that purpose, temperature sensors, pressure meters and flow meters have been strategically...
COMPUTER CONTROLLED AUTOMOBILE AIR CONDITIONING UNIT - TAAUC
  • TAAUC
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TAAUC
Computer Controlled Automobile Air Conditioning Unit
The Computer Controlled Automobile Air Conditioning Trainer, "TAAUC", consists, basically, of a compressor driven through a belt by a motor that simulates the engine of a car.The number of revolutions of the engine and, therefore, the compressor,...
AUTOMOBILE AIR CONDITIONING UNIT - TAAU
  • TAAU
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TAAU
Automobile Air Conditioning Unit
The Automobile Air Conditioning Unit, "TAAU", consists, basically, of a compressor driven through a belt by a motor that simulates the engine of a car. The number of revolutions of the engine and, therefore, the compressor, can be adjusted with a...
COMPUTER CONTROLLED AIR CONDITIONING UNIT WITH CLIMATIC CHAMBER - TSAC
  • TSAC
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TSAC
Computer Controlled Air Conditioning Unit with Climatic Chamber
The Computer Controlled Air Conditioning Unit with Climatic Chamber, "TSAC", designed by EDIBON, is clearly arranged and represents a complete air conditioning system with an air duct and a climatic chamber.The main components of the air...
COMPUTER CONTROLLED AIR DUCT SYSTEMS UNIT - TSCAC
  • TSCAC
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TSCAC
Computer Controlled Air Duct Systems Unit
With the Computer Controlled Air Duct Systems Unit, "TSCAC", the user will study the air distribution under different configurations thanks to the supports included with the unit. The user himself will assemble the air ducts using usual elements...
SPLIT AIR CONDITIONER UNIT - TACS
  • TACS
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TACS
Split Air Conditioner Unit
The Split Air Conditioner Unit, "TACS", designed by EDIBON allows the study of the operation of a split system air conditioner with heat pump function to heat or cool, apart from other operation modes available.The main element of the Split Air...
AIR HUMIDITY MEASUREMENT UNIT - TMHA
  • TMHA
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TMHA
Air Humidity Measurement Unit
The Air Humidity Measurement Unit, "TMHA", enables the differences in accuracy between different instruments to measure the air relative humidity. It also includes a fan to show the effects of airflow on the different instruments. A mobile...
HYDRAULIC RADIATOR BALANCING TRAINING UNIT - THBT
  • THBT
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
THBT
Hydraulic Radiator Balancing Training Unit
The Hydraulic Radiator Balancing Training Unit, "THBT", allows the study of the amount of water with which to guarantee that all the radiators of an installation are supplied with sufficient hot water.The hydraulic balancing is carried out by...
HEATING SYSTEM TRAINING UNIT - THST
  • THST
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
THST
Heating System Training Unit
The Heating System Training Unit, "THST", has been designed to study central heating systems. The unit simulates a central heating system. For that purpose, it is made up of four radiators with a thermostatic valve each. This valve controls the...
CIRCULATING PUMPS TRAINING UNIT - TCPT
  • TCPT
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TCPT
Circulating Pumps Training Unit
The Circulation Pumps Training Unit, "TCPT", is a unit of experimentation of sanitary and heating techniques that allows studying the operation of circulating pumps, both connected in series and in parallel. It consists of a pipe circuit with two...
EXPANSION VESSEL TRAINING UNIT - TEVT
  • TEVT
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TEVT
Expansion Vessel Training Unit
The Expansion Vessel Training Unit, "TEVT", is a test unit for sanitary and heating techniques that allows studying the operation of an expansion vessel. It also allows studying the pressure – volume characteristic curve of it. The aim element of...
PRESSURE VESSEL AND SAFETY FEATURES TRAINING UNIT - TPVST
  • TPVST
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TPVST
Pressure Vessel and Safety Features Training Unit
The Pressure Vessel and Safety Features Training Unit, "TPVST", is an experimentation of sanitary and heating techniques unit that allows studying the safety elements of a heating system with a pressure tank. It consists of a circuit of pipes for...
Ask for information