Best sellers
Showing 1-30 of 514 item(s)
ABSORPTION REFRIGERATION UNIT - TRAB
  • TRAB
Available
9.4.- REFRIGERATION
TRAB

Absorption Refrigeration Unit

The Absorption Refrigeration Unit, "TRAB", developed by EDIBON, is a complete laboratory unit for the demonstration of absorption refrigeration.This unit is provided with a dual power source (heat source) of LPG and electricity. A pressure...
AC THREE-PHASE INDUCTION MOTORS APPLICATION - AEL-ACEM
  • AEL-ACEM
Available
4.3.2.1.- AC ELECTRICAL MOTORS AND GENERATORS
AEL-ACEM

AC Three-Phase Induction Motors Application

This AC Three-Phase Induction Motors Application, "AEL-ACEM", consists of a base equipment which is formed by several modules such as power supplies, push buttons, three-phase autotransformer, A.C. ammeter, circuit breakers, timers, flywheel, etc....
ACCELERATION OF GEARED SYSTEM UNIT - MAE
  • MAE
Available
14.1.2.2.- GEARS
MAE

Acceleration of Geared System Unit

The Acceleration of Geared Systems Unit "MAE" allows to perform tests to calculate the moment of inertia of a gear train system.The MAE unit includes six gears. Two of them can have another position in the shafts to vary the gear ratio, allowing...
ACKERMANN STEERING MECHANISM - MDA
  • MDA
Available
14.1.2.1.- MECHANISMS
MDA

Ackermann Steering Mechanism

The Ackermann Steering Mechanism, "MDA", is a bench-mounted unit designed to determine the lead angle of a steering trapezoid in an Ackermann steering mechanism, the disadvantages of incorrectly adjusted track rods and the influence of the track...
ADVANCED DISSECTIBLE AND CONFIGURABLE ELECTRICAL MACHINES - AEL-EMT-KIT
  • AEL-EMT-KIT
Available
4.3.3.- PHYSICAL PRINCIPLES AND DESIGN OF ELECTRICAL MACHINES
AEL-EMT-KIT

Advanced Dissectible and Configurable Electrical Machines

The Advanced Dissectable and Configurable Electrical Machines (AEL-EMT-KIT) is a set of configurable electrical machines designed to study the basic principles of electrical machines: Dissectible mechanical pieces. Assembled and disassembled...
ADVANCED POWER FACTOR COMPENSATION APPLICATION - AEL-EECFP
  • AEL-EECFP
Available
5.1.3.3.- POWER DISTRIBUTION AND LOADS
AEL-EECFP

Advanced Power Factor Compensation Application

Industrial customers use three-phase power consumption with different power factors. If their power factor drops below a prescribed value, power losses in transmission lines increase. For this reason, the customers have to pay a penalty. In order...
AERATION UNIT - PEAI
  • PEAI
Available
13.3.- WASTEWATER TREATMENT
PEAI

Aeration Unit

The Aeration Unit, "PEAI", allows the study of the oxygen transfer characteristics of diffused air systems and the physical and chemical parameters which influence oxygenation capacity and demonstrates the water aeration process which, mainly,...
AEROBIC DIGESTER - PDA
  • PDA
Available
13.3.- WASTEWATER TREATMENT
PDA

Aerobic Digester

The objective of the Aerobic Digester, "PDA", is to study and understand aerobic digestion processes and to analyze their main parameters.The unit consists of a 20 l capacity reactor vessel with a tubular membrane made of plastic inside to...
AERODYNAMIC TUNNEL, 300 X 300 MM - TA300/300
  • TA300/300
Available
8.6.- AERODYNAMICS
TA300/300

Aerodynamic Tunnel, 300 x 300 mm

The Aerodynamic Tunnel, 300 x 300 mm, "TA300/300", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan located at the discharge end of the...
AERODYNAMIC TUNNEL, 50 X 250 MM - TA50/250
  • TA50/250
Available
8.6.- AERODYNAMICS
TA50/250

Aerodynamic Tunnel, 50 x 250 mm

The Aerodynamic Tunnel, 50 x 250 mm, "TA50/250", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan located at the discharge end of the...
AIR CONDITIONING LABORATORY UNIT - TAAB
  • TAAB
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TAAB

Air Conditioning Laboratory Unit

The Air Conditioning Laboratory Unit, "TAAB", has been designed to study the change of the air conditions and the refrigeration circuit. The unit consists of a testing tunnel made in stainless steel, in which there have installed two windows....
ALLEN BRADLEY PLC APPLICATION - AE-PLC-AB
  • AE-PLC-AB
Available
6.2.1.- PLC OPTIONS
AE-PLC-AB

ALLEN BRADLEY PLC Application

The "AE-PLC-AB" is a PLC application which contains one of the last Allen Bradley PLC models. The "AE-PLC-AB" can be used alone, to study the PLC systems, or in conjunction with the EDIBON compatible units, to study a real application of the PLC...
ALTERNATING CURRENT (AC) CIRCUITS MODULE - N-M2
  • N-M2
Available
14.2.1.1.- BASIC ELECTRICAL LAWS CONCEPTS
N-M2

Alternating Current (AC) Circuits Module

In contrast to DC, which always has the same direction and sense, in AC the flow of electrons changes direction periodically with a frequency of 50 or 60 Hz (depending on the country).With Alternating Current (AC) Circuits Module, "N-M2", designed...
ALTERNATORS STUDY APPLICATION - AEL-EEA
  • AEL-EEA
Available
4.3.2.1.- AC ELECTRICAL MOTORS AND GENERATORS
AEL-EEA

Alternators Study Application

The Alternator Study Application, "AEL-EEA", has been designed by EDIBON to study the behavior of three-phase synchronous generators with independent excitation.This application consists of a motor-generator group and a series of modules that...
ANAEROBIC DIGESTER - PDAN
  • PDAN
Available
13.3.- WASTEWATER TREATMENT
PDAN

Anaerobic Digester

The objective of the Anaerobic Digester, "PDAN", is to study and understand the stages of the anaerobic digestion, as well as the anaerobic digestion process itself. It is supplied with two packed anaerobic digesters. In this way, the user can...
ANALOG MODULATIONS UNIT - EMDA/A
  • EMDA/A
Available
3.2.1.- CODING, MODULATION AND SIGNAL PROCESSING THEORY
EMDA/A

Analog Modulations Unit

The Analog Modulations Unit, "EMDA/A", is a complete analog communications unit designed to explain the basic concepts of analog modulation. It covers the principles of many of the modulation and demodulation techniques used in modern analog...
ANALOG/DIGITAL CONVERTERS MODULE - N-M60
  • N-M60
Available
2.3.3.- DIGITAL ELECTRONICS
N-M60

Analog/Digital Converters Module

Most of the "information" generated in the world by various physical phenomena has a strong analogical character. This means that the information undergoes a continuous variation within certain limits determined over time. Of course, there is also...
ANALYSIS OF THREE-PHASE POWER LINES APPLICATION - AEL-TI-01
  • AEL-TI-01
Available
5.1.3.2.- POWER TRANSMISSION
AEL-TI-01

Analysis of Three-phase Power Lines Application

The Analysis of Three-phase Power Lines Application, "AEL-TI-01", includes a series of modules which allow the study of the most important characteristics of aerial lines, among them we can find: the aerial line module, which is configurable with...
ANTENNA UNIT - EAN
  • EAN
Available
3.2.2.- ANTENNA AND MICROWAVE THEORY
EAN

Antenna Unit

The Antenna Unit "EAN" is a complete and affordable unit and no extra hardware is required for complete all the practice set.The "EAN" allows students to learn how to perform the essential antenna measurements: radiation pattern with the measure...
APPLICATIONS FOR PROCESS CONTROL - APC
  • APC
Available
10.3.- INDUSTRIAL APPLICATIONS AND SYSTEMS
APC

Applications for Process Control

Today, control systems play an essential role in most industrial processes due to the significant improvements they can provide in terms of production quality, efficiency, costs and performance.The Applications for Process Control, "APC", have...
APPLICATIONS OF LIGHT - M44
  • M44
Available
14.2.1.5.- INSTRUMENTATION AND CONTROL
M44

Applications of Light

This unit allows different practices related to the measurement of light intensity to be carried out. Photodiodes are semiconductor light sensors that generate a current or voltage when the P-N junction in the semiconductor is illuminated with...
ASSEMBLY AND MAINTENANCE OF A CENTRIFUGAL PUMP UNIT - AMCP
  • Accessory of AMP
Available
8.9.2.- DETACHABLE MODELS
AMCP

Assembly and Maintenance of a Centrifugal Pump Unit

Accessory of AMP
The centrifugal pumps belong to the group of rotodynamic pumps, where the fluid is boosted thanks to the acceleration acquired whenpassing through the operating impeller. This acceleration, which starts from the center of the impeller and goes to...
ASSEMBLY AND MAINTENANCE OF A DIAPHRAGM PUMP UNIT - AMDP
  • Accessory of AMP
Available
8.9.2.- DETACHABLE MODELS
AMDP

Assembly and Maintenance of a Diaphragm Pump Unit

Accessory of AMP
Membrane pumps or diaphragm pumps belong to the group of positive displacement pumps, where the pressure increase is obtained by pushing elastic walls, known as, membranes or diaphragms, which change the volume of the chamber. Retention valves,...
ASSEMBLY AND MAINTENANCE OF A GEAR PUMP UNIT - AMGP
  • Accessory of AMP
Available
8.9.2.- DETACHABLE MODELS
AMGP

Assembly and Maintenance of a Gear Pump Unit

Accessory of AMP
The gear pumps belong to the group of positive displacement, rotary piston pumps, which produce flow by transporting the fluid betweenthe teeth of two coupled gears. One of them is driven by the shaft of the pump (driving shaft), which turns the...
Ask for information