2.2.- KITS FOR CIRCUITS ASSEMBLY

The electronic development phase of a device is a group of stages carried out to obtain a product that meets the required specifications.

View more

The most characteristic stages of any electronic device development are: defining the equipment specifications, designing the different electronic circuits that the device will need (power supply circuits, control circuits, power circuits, signal filtering circuits, oscillator circuits, isolation circuits between the power circuits and the signal circuits, analog signal conditioning circuits, amplifier circuits, coder or decoder circuits, etc.), calculating the characteristics of the components of each circuit, simulating the operation of the electronic circuits of the apparatus, testing the different circuits individually, developing the prototype of the product and, lastly, manufacturing the final product.

The stages of testing development and prototyping of electronic circuits are one of the key steps in the design or redesign of electronic circuits.

In the past, these tests were carried out by assembling and soldering the components on a blank PCB, but thanks to the standardization of the components, together with the emergence of the breadboard or protoboard, prototypes of circuits can be made without soldering, which has greatly facilitated the construction of the circuits to be tested.

View Products
KITS FOR CIRCUITS ASSEMBLY UNITS
Showing 1-18 of 18 item(s)
SEMICONDUCTORS I KIT - M3/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M3/KIT

Semiconductors I Kit

Accessory of M-KITS
With Semiconductors I Kit, "M3/KIT", designed by EDIBON, the basic concepts of diodes can be studied, at the same time as the student will be asked to carry out a series of assemblies on the practice board to consolidate his knowledge of PN-type...
SEMICONDUCTORS II KIT - M4/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M4/KIT

Semiconductors II Kit

Accessory of M-KITS
With Semiconductors II Kit, "M4/KIT", designed by EDIBON, semiconductors can be studied by extending the knowledge acquired in the basic module "M3/KIT".
POWER SUPPLIES KIT - M5/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M5/KIT

Power Supplies Kit

Accessory of M-KITS
With the Power Supplies Kit "M5/KIT", designed by EDIBON, symmetrical voltage regulators, operation of fixed, symmetrical and switched-mode power supplies as well as rectification (conversion of an AC voltage to a DC voltage) can be studied.
OSCILLATORS KIT - M6/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M6/KIT

Oscillators Kit

Accessory of M-KITS
With the Oscillators Kit, "M6/KIT", designed by EDIBON, the different oscillators can be studied: RC and LC network oscillators, Wein bridge, Colpitts, Hartley and the astable multivibrator.
OPERATIONAL AMPLIFIERS KIT - M7/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M7/KIT

Operational Amplifiers Kit

Accessory of M-KITS
With Operational Amplifiers Kit, "M7/KIT", designed by EDIBON, the different amplifiers can be studied: inverting, non-inverting, additive, differential and comparators.
FILTERS KIT - M8/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M8/KIT

Filters Kit

Accessory of M-KITS
With Filters Kit, "M8/KIT", designed by EDIBON, the different types of filters can be studied: RC and LC, in "T" type configuration, active filters and also study associations of one and others in order to be able to practice with more complex...
POWER ELECTRONICS KIT - M9/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M9/KIT

Power Electronics Kit

Accessory of M-KITS
With Power Electronics Kit, "M9/KIT", designed by EDIBON, the operation of MOSFET transistors, thyristors, TRIACs, etc. can be studied.
DIGITAL SYSTEMS AND CONVERTERS KIT - M10/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M10/KIT

Digital Systems and Converters Kit

Accessory of M-KITS
With Digital Systems and Converters Kit, "M10/KIT", designed by EDIBON, the behaviour of BCD/Binary counters, comparators and analogue integrators can be studied, as well as analogue/digital conversion and viceversa.
DIGITAL ELECTRONIC FUNDAMENTALS KIT - M11/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M11/KIT

Digital Electronic Fundamentals Kit

Accessory of M-KITS
With Digital Electronic Fundamentals Kit, "M11/KIT", designed by EDIBON, numbering systems, logic circuits, TTL gates, CMOS, Boolean algebra, etc. can be studied.
BASIC COMBINATIONAL CIRCUITS KIT - M12/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M12/KIT

Basic Combinational Circuits Kit

Accessory of M-KITS
With Basic Combinational Circuits Kit, "M12/KIT", designed by EDIBON, encoders, decoders, multiplexers, demultiplexers, digital comparators and arithmetic and logical operations can be studied.
BASIC SEQUENTIAL CIRCUITS KIT - M13/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M13/KIT

Basic Sequential Circuits Kit

Accessory of M-KITS
With Basic Sequential Circuits Kit, "M13/KIT", designed by EDIBON, all types of bistables, counters, flip-flops, synchronous sequential circuits and the operation of memories can be studied.
OPTOELECTRONICS KIT - M14/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M14/KIT

Optoelectronics Kit

Accessory of M-KITS
With Optoelectronics Kit, "M14/KIT", designed by EDIBON, the main light emitters and liquid crystal displays (LCD), photoconductive cells, fibre optics, infrared, etc. can be studied.
ELECTRIC NETWORKS KIT - M16/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M16/KIT

Electric Networks Kit

Accessory of M-KITS
With the Electric Networks Kit, "M16/KIT", designed by EDIBON, it is possible to understand the principles of Ohm’s Law, Norton’s and Thévenin’s Theorem, Wheatstone bridge operation, superposition theorems or star/delta transformation and viceversa.
THREE-PHASE CIRCUITS KIT - M18/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M18/KIT

Three-phase Circuits Kit

Accessory of M-KITS
The Three-phase Circuits Kit, "M18/KIT", designed by EDIBON, is used to study the generation of three-phase systems, load balancing between phases, operation of three-phase rectifiers, etc.