The Absorption Refrigeration Unit, "TRAB", developed by EDIBON, is a complete laboratory unit for the demonstration of absorption refrigeration.This unit is provided with a dual power source (heat source) of LPG and electricity. A pressure...

This AC Three-Phase Induction Motors Application, "AEL-ACEM", consists of a base equipment which is formed by several modules such as power supplies, push buttons, three-phase autotransformer, A.C. ammeter, circuit breakers, timers, flywheel, etc....

The AC Three-Phase Reluctance Motors Application, "AEL-ACRL", has been designed is to study the storage of the working principle and the main industrial operations fulfilled with three-phase reluctance motors.The "AEL-ACRL" allows the user to...

The Acceleration of Geared Systems Unit "MAE" allows to perform tests to calculate the moment of inertia of a gear train system.The MAE unit includes six gears. Two of them can have another position in the shafts to vary the gear ratio, allowing...

The Ackermann Steering Mechanism, "MDA", is a bench-mounted unit designed to determine the lead angle of a steering trapezoid in an Ackermann steering mechanism, the disadvantages of incorrectly adjusted track rods and the influence of the track...

The Advanced AC Electrical Motors Application, "AEL-ACEMT", has been designed by Edibon to carry out electrical/mechanical test for a great variety of AC motors. Such tests allow obtaining the most significant electrical and mechanical...

The Advanced Computer Controlled Continuous Distillation Unit "UDCC/A" is an installation that allows the study of fractional distillation using a packed column which is able to operate with different packings.There is a feeding system that...

The Advanced Computer Controlled Deodorizing Unit, "AEDC/A", designed by EDIBON is a unit that allows the study and research of the continuous deodorization operation capable of performing a vacuum and high temperature distillation with steam.In...

The Advanced Crystallization Unit, "QUCB/A", designed by EDIBON, is a crystallization unit based on the cooling method that allows for observing and studying the mass transfer industrial operation in which a solid is formed from a homogeneous...

The application of Advanced Dissectible and Configurable Electrical Machines, "AEL-EMT-KIT", is a set of configurable electrical machines designed for the study of the fundamental principles of electrical machines.This application offers a unique...

The APS12 Advanced Smart Grid Power System is one of the most advanced and complete power systems of the market. It is not a simulator but a real system.The APS12 is able to show any electric phenomenon that are present in real power systems, such...

Industrial customers use three-phase power consumption with different power factors. If their power factor drops below a prescribed value, power losses in transmission lines increase. For this reason, the customers have to pay a penalty. In order...

The Aeration Unit, "PEAI", allows the study of the oxygen transfer characteristics of diffused air systems and the physical and chemical parameters which influence oxygenation capacity and demonstrates the water aeration process which, mainly,...

The objective of the Aerobic Digester, "PDA", is to study and understand aerobic digestion processes and to analyze their main parameters.The unit consists of a 20 l capacity reactor vessel with a tubular membrane made of plastic inside to...

The Aerodynamic Tunnel, 300 x 300 mm, "TA300/300", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan located at the discharge end of the...

The Aerodynamic Tunnel, 50 x 250 mm, "TA50/250", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan located at the discharge end of the...

The Air Conditioning Laboratory Unit, "TAAB", has been designed to study the change of the air conditions and the refrigeration circuit. The unit consists of a testing tunnel made in stainless steel, in which there have installed two windows....

The Air Flow Studies Unit, "HECA", is a floor standing unit that allows to measure different characteristics of air distribution systems and to demonstrate certain basic principles of fluid mechanics in ducts and jets.The unit is mounted on a...

The "RYC-TAR" Air Flow Temperature Control module has been designed to study a practical control system, through the control of an air flow temperature.The "RYC-TAR" module consists of two main components: the "RYC-TAR" apparatus and the "RYC-TAR"...

The Air Humidity Measurement Unit, "TMHA", enables the differences in accuracy between different instruments to measure the air relative humidity. It also includes a fan to show the effects of airflow on the different instruments. A mobile...

The ALLEN BRADLEY PLC Application, "AE-PLC-AB", is a PLC unit designed by EDIBON which use one of the last ALLEN BRADLEY PLC units. It allows the user to learn about PLC logic programming, different PLC programming languages, PLC to PC...

With Alternating Current (AC) Circuits Kit, "M2/KIT", designed by EDIBON, you can start to study the basic principles in alternating current.

In contrast to DC, which always has the same direction and sense, in AC the flow of electrons changes direction periodically with a frequency of 50 or 60 Hz (depending on the country).With Alternating Current (AC) Circuits Module, "N-M2", designed...