최고 판매자
Showing 1-30 of 291 item(s)
  • TRAB
Available
9.4.- 냉각
TRAB

Absorption Refrigeration Unit

The Absorption Refrigeration Unit, "TRAB", developed by EDIBON, is a complete laboratory unit for the demonstration of absorption refrigeration.This unit is provided with a dual power source (heat source) of LPG and electricity. A pressure...
ACCELERATION OF GEARED SYSTEM UNIT - MAE
  • MAE
Available
14.1.2.2.- 기어
MAE

Acceleration of Geared System Unit

The Acceleration of Geared Systems Unit "MAE" allows to perform tests to calculate the moment of inertia of a gear train system.The MAE unit includes six gears. Two of them can have another position in the shafts to vary the gear ratio, allowing...
ADVANCED DISSECTIBLE AND CONFIGURABLE ELECTRICAL MACHINES - AEL-EMT-KIT
  • AEL-EMT-KIT
Available
4.3.3.- 전기 기계의 물리적 원리 및 설계
AEL-EMT-KIT

Advanced Dissectible and Configurable Electrical Machines

The Advanced Dissectable and Configurable Electrical Machines (AEL-EMT-KIT) is a set of configurable electrical machines designed to study the basic principles of electrical machines: Dissectible mechanical pieces. Assembled and disassembled...
AERATION UNIT - PEAI
  • PEAI
Available
13.3.- 폐수 처리
PEAI

Aeration Unit

The Aeration Unit, "PEAI", allows the study of the oxygen transfer characteristics of diffused air systems and the physical and chemical parameters which influence oxygenation capacity and demonstrates the water aeration process which, mainly,...
AEROBIC DIGESTER - PDA
  • PDA
Available
13.3.- 폐수 처리
PDA

Aerobic Digester

The objective of the Aerobic Digester, "PDA", is to study and understand aerobic digestion processes and to analyze their main parameters.The unit consists of a 20 l capacity reactor vessel with a tubular membrane made of plastic inside to...
AERODYNAMIC TUNNEL, 300 X 300 MM - TA300/300
  • TA300/300
Available
8.6.- 공기 역학
TA300/300

Aerodynamic Tunnel, 300 x 300 mm

The Aerodynamic Tunnel, 300 x 300 mm, "TA300/300", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan located at the discharge end of the...
AERODYNAMIC TUNNEL, 50 X 250 MM - TA50/250|
  • TA50/250
Available
8.6.- 공기 역학
TA50/250

Aerodynamic Tunnel, 50 x 250 mm

The Aerodynamic Tunnel, 50 x 250 mm, "TA50/250", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan located at the discharge end of the...
AIR CONDITIONING LABORATORY UNIT - TAAB
  • TAAB
Available
9.2.- 난방, 환기, 에어컨 및 온수
TAAB

Air Conditioning Laboratory Unit

The Air Conditioning Laboratory Unit, "TAAB", has been designed to study the change of the air conditions and the refrigeration circuit. The unit consists of a testing tunnel made in stainless steel, in which there have installed two windows....
ALTERNATING CURRENT (A.C.) CIRCUITS MODULE - N-M2
  • N-M2
Available
14.2.1.1.- 기본 전기 법 개념
N-M2

Alternating Current (AC) Circuits Module

In contrast to DC, which always has the same direction and sense, in AC the flow of electrons changes direction periodically with a frequency of 50 or 60 Hz (depending on the country).With Alternating Current (AC) Circuits Module, "N-M2", designed...
ALTERNATORS STUDY APPLICATION - AEL-EEA
  • AEL-EEA
Available
4.3.2.1.- 교류 전기 모터 및 발전기
AEL-EEA

Alternators Study Application

The Alternator Study Application, "AEL-EEA", has been designed by EDIBON to study the behavior of three-phase synchronous generators with independent excitation.This application consists of a motor-generator group and a series of modules that...
ANAEROBIC DIGESTER - PDAN
  • PDAN
Available
13.3.- 폐수 처리
PDAN

Anaerobic Digester

The objective of the Anaerobic Digester, "PDAN", is to study and understand the stages of the anaerobic digestion, as well as the anaerobic digestion process itself. It is supplied with two packed anaerobic digesters. In this way, the user can...
ASSEMBLY AND MAINTENANCE OF A CENTRIFUGAL PUMP UNIT - AMCP
  • 액세서리 AMP
Available
8.9.2.- 분리 가능한 모델
AMCP

Assembly and Maintenance of a Centrifugal Pump Unit

액세서리 AMP
The centrifugal pumps belong to the group of rotodynamic pumps, where the fluid is boosted thanks to the acceleration acquired whenpassing through the operating impeller. This acceleration, which starts from the center of the impeller and goes to...
ASSEMBLY AND MAINTENANCE OF A DIAPHRAGM PUMP UNIT - AMDP
  • 액세서리 AMP
Available
8.9.2.- 분리 가능한 모델
AMDP

Assembly and Maintenance of a Diaphragm Pump Unit

액세서리 AMP
Membrane pumps or diaphragm pumps belong to the group of positive displacement pumps, where the pressure increase is obtained by pushing elastic walls, known as, membranes or diaphragms, which change the volume of the chamber. Retention valves,...
ASSEMBLY AND MAINTENANCE OF A GEAR PUMP UNIT - AMGP
  • 액세서리 AMP
Available
8.9.2.- 분리 가능한 모델
AMGP

Assembly and Maintenance of a Gear Pump Unit

액세서리 AMP
The gear pumps belong to the group of positive displacement, rotary piston pumps, which produce flow by transporting the fluid betweenthe teeth of two coupled gears. One of them is driven by the shaft of the pump (driving shaft), which turns the...
ASSEMBLY AND MAINTENANCE OF A PISTON PUMP UNIT - AMPP
  • 액세서리 AMP
Available
8.9.2.- 분리 가능한 모델
AMPP

Assembly and Maintenance of a Piston Pump Unit

액세서리 AMP
The piston pumps belong to the group of positive displacement pumps, where there are one or several fixed cavities whose volume can be changed due to the effect of a piston. The movement of the fluid is discontinuous and the charge and discharge...
ASSEMBLY AND MAINTENANCE OF A SCREW PUMP UNIT - AMSP
  • 액세서리 AMP
Available
8.9.2.- 분리 가능한 모델
AMSP

Assembly and Maintenance of a Screw Pump Unit

액세서리 AMP
The screw pumps belong to the group of positive displacement pumps, which use aneccentric helical screw (rotor) that moves inside a sleeve (stator), making the liquid flowbetween the screw and the sleeve. The most important applications of this...
ASSEMBLY AND MAINTENANCE OF AN IN-LINE CENTRIFUGAL PUMP UNIT - AMLCP
  • 액세서리 AMP
Available
8.9.2.- 분리 가능한 모델
AMLCP

Assembly and Maintenance of an In-Line Centrifugal Pump Unit

액세서리 AMP
The centrifugal in-line pumps belong to the rotodynamic pump group, these pumps are the most used currently to pump liquids in general. In-line pumps are installed in straight pipes, and the main difference with a standard pump is that the suction...
AUDIO AND VIDEO ENTRY PHONE APPLICATION - AEL-AD14
  • AEL-AD14
Available
4.1.1.- 국내 전기 설비
AEL-AD14

Audio and Video Entry Phone Application

The Audio and Video Entry Phone Application, "AEL-AD14", has been designed by Edibon in order to show the functionality of this kind of entryphone.Video Entry Phone is a stand-alone intercom application system used to manage calls made at the...
AUTOMATION SYSTEM SIMULATION SOFTWARE - AE-AS
  • AE-AS
Available
6.1.4.- 메카트로닉스 소프트웨어
AE-AS

Automation System Simulation Software

The "AE-AS" software is designed to perform the following tasks: 2D and 3D simulation of a real automation system, data acquisition, supervision and control (SCADA) with a real automation system through OPC protocol communication and carry out...
BASE-SERVICE UNIT - QRUBI|
Available
11.2.- 화학 반응기
QRUBI

Base-Service Unit

액세서리 QRQC
This unit is common for the Chemical Reactors and can work with one or several reactors. Installation and exchange system of the reactors quick and easy to handle. It supplies all the services for the operation of each reactor. Anodized aluminum...
BASIC ELECTRONICS AND ELECTRICITY LABORATORY: - LIEBA
  • LIEBA
Available
14.2.1.6.- 전력 전자
LIEBA

Basic Electronics and Electricity Laboratory:

We present a flexible and modular-based system for learning basic electronics, basic electricity and circuit theory. The advantage given by this learning and teaching system is that the student establishes his own rhythm, thus rendering...
BASIC FLUIDS MECHANICS INTEGRATED LABORATORY - LIFLUBA
  • LIFLUBA
Available
8.1.7.- 유압 기계: 터빈
LIFLUBA

Basic Fluids Mechanics Integrated Laboratory

Hydraulics is the branch of science that deals with the mechanical properties of fluids, and Fluid Mechanics provides the foundation for hydraulics.With LIFLUBA (Basic Fluids Mechanics Integrated Laboratory), EDIBON tries to give answer to the...
BASIC HYDRAULIC FEED SYSTEM - FME00/B|
Available
8.1.1.- 기본 단위
FME00/B

Basic Hydraulic Feed System

액세서리 LIFLUBA
This unit consists on a centrifugal pump that takes water from a HDPE tank of 140 liters of capacity. At the outlet of the pump, there is a flowmeter that is used to regulate the inlet flow to the equipment and it ends in a mouthpiece that has a...
BASIC LUMINOSITY CONTROL APPLICATION - AEL-AD6B
  • AEL-AD6B
Available
4.1.1.- 국내 전기 설비
AEL-AD6B

Basic Luminosity Control Application

As the technology develops, it is usually to tend forward more efficient devices and more energy saving. In case of lightning, they have appeared a lot of technologies much more efficient at consumption level or construction materials level, but...
BASIC MECHANICS INTEGRATED LABORATORY - LIMEBA
  • LIMEBA
Available
14.1.1.- 역학 기본 키트
LIMEBA

Basic Mechanics Integrated Laboratory

LIMEBA consists on a complete set of exercises and practical experiments belonging to the area of Applied Mechanics in its two mainsubareas:Statics: the analysis of structures in balance.Dynamics: analysis of the motion of mechanisms.LIMEBA is...