Best sellers
Showing 325-360 of 920 item(s)
COMPUTER CONTROLLED TEACHING CREAM SEPARATOR - DSNC
  • DSNC
Available
12.2.- DAIRY PRODUCTS TREATMENT
DSNC
Computer Controlled Teaching Cream Separator
The Computer Controlled Teaching Cream Separator, "DSNC", allows the study of the separation of a dense phase liquid from a lighter phase liquid, in particular the separation of the cream from the milk in a disk stack centrifuge. The system is...
COMPUTER CONTROLLED TEACHING CURDLING TANK - CCDC
  • CCDC
Available
12.2.- DAIRY PRODUCTS TREATMENT
CCDC
Computer Controlled Teaching Curdling Tank
The Computer Controlled Teaching Curdling Tank, "CCDC", is employed to curdle milk, which is an essential process to make cheese.The unit has tank, water jacket, coil with one inlet and outlet for the water of the boiler, inlet for the water of...
COMPUTER CONTROLLED TEACHING YOGURT INCUBATOR - IYDC
  • IYDC
Available
12.2.- DAIRY PRODUCTS TREATMENT
IYDC
Computer Controlled Teaching Yogurt Incubator
The Computer Controlled Teaching Yogurt Incubator, "IYDC", is called yogurt maker or yogurt heater. This yogurt maker consists of an insulated central body where yogurt fermentation is carried out.There is a series of shelves inside to place the...
COMPUTER CONTROLLED TEMPERATURE MEASUREMENT UNIT - TMTC
  • TMTC
Available
9.1.- FUNDAMENTALS AND BASIC CONCEPTS OF THERMODYNAMICS
TMTC
Computer Controlled Temperature Measurement Unit
The Computer Controlled Temperature Measurement Unit, "TMTC", designed by EDIBON, works as a temperature meter that uses different temperatures measuring devices to compare, check and analyze the temperature and how is the precision for the...
COMPUTER CONTROLLED TEST BENCH FOR 11 KW ENGINES - TBMC12
  • TBMC12
Available
7.2.3.- ENGINES
TBMC12
Computer Controlled Test Bench for 11 kW Engines
The Computer Controlled Test Bench for Single-Cylinder and Two-Cylinders Engines, 11 kW, "TBMC12", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 11 kW.The element of the unit that offers load torque is an eddy...
COMPUTER CONTROLLED TEST BENCH FOR 2.2 KW ENGINES - TBMC3
  • TBMC3
Available
7.2.3.- ENGINES
TBMC3
Computer Controlled Test Bench for 2.2 kW Engines
The Computer Controlled Test Bench for Single-Cylinder Engines, 2.2 kW, "TBMC3", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 2.2 kW.The unit has an element to exert the braking torque, an asynchronous motor...
COMPUTER CONTROLLED TEST BENCH FOR 7.5 KW ENGINES - TBMC8
  • TBMC8
Available
7.2.3.- ENGINES
TBMC8
Computer Controlled Test Bench for 7.5 kW Engines
The Computer Controlled Test Bench for Single-Cylinder Engines, 7.5 kW, "TBMC8", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 7.5 kW.The element of the unit that offers load torque is an eddy current...
COMPUTER CONTROLLED TEST BENCH FOR 75 KW ENGINES - TBMC75
  • TBMC75
Available
7.2.3.- ENGINES
TBMC75
Computer Controlled Test Bench for 75 kW Engines
The Computer Controlled Test Bench for Four Cylinders Engines, 75 kW, "TBMC75", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 75 kW.The element of the unit that offers load torque is an eddy current...
COMPUTER CONTROLLED THERMAL SOLAR ENERGY BASIC UNIT - MINI-EESTC
  • MINI-EESTC
Available
5.3.2.- SOLAR THERMAL ENERGY
MINI-EESTC
Computer Controlled Thermal Solar Energy Basic Unit
The Computer Controlled Thermal Solar Energy Basic Unit, "MINI-EESTC", allows to demonstrate solar thermal heating of domestic water in an illustrative manner.This unit is a system that transforms solar energy into usable thermal energy. It uses...
COMPUTER CONTROLLED THERMAL SOLAR ENERGY UNIT - EESTC
  • EESTC
Available
5.3.2.- SOLAR THERMAL ENERGY
EESTC
Computer Controlled Thermal Solar Energy Unit
The Computer Controlled Thermal Solar Energy Unit, "EESTC", is a system that transforms solar energy into usable thermal energy. It uses the thermosiphon solar system to heat water or the traditional pumping system. In both cases, the absorbed...
COMPUTER CONTROLLED THERMO-ELECTRIC HEAT PUMP - TBTC
  • TBTC
Available
5.3.11.- OTHER NON-CONVENTIONAL SYSTEMS
TBTC
Computer Controlled Thermo-Electric Heat Pump
The Computer Controlled Thermo-Electric Heat Pump, "TBTC", has been designed by EDIBON to study of different phenomena in which heat and electricity take place (Thermoelectricity). Some of them are the Peltier effect, the Thomson or Lenz effect...
COMPUTER CONTROLLED THIN FILM EVAPORATOR - EPFC
  • EPFC
Available
11.1.2.- EVAPORATION
EPFC
Computer Controlled Thin Film Evaporator
The Computer Controlled Thin Film Evaporator, "EPFC", has been designed by EDIBON to study (theoretical and practically) the different operating variables that influence the thin film evaporation process.The unit is formed by a thin film...
COMPUTER CONTROLLED THREE DIMENSIONS (3D) PHYSICS - EFAC
  • EFAC
Available
1.1.- 3D PHYSICS
EFAC
Computer Controlled Three Dimensions (3D) Physics
The Computer Controlled Three Dimensional (3D) Physics, "EFAC", from EDIBON, allows to do practical exercises in the different fields of physics (electricity, magnetic fields, mechanics, acoustics, optics and thermodynamics). The "EFAC" is an...
COMPUTER CONTROLLED TIDAL ENERGY UNIT - EMMC
  • EMMC
Available
5.3.4.- MARINE ENERGY
EMMC
Computer Controlled Tidal Energy Unit
Tidal energy is another way to generate electricity extracting energy from the sea. Twice a day big volumes of water rise and fall with the tides.A Tidal Barrage make use of the potential energy in the difference in height (or head) between high...
COMPUTER CONTROLLED TORSIONAL VIBRATION UNIT - MEVTC
  • MEVTC
Available
7.1.4.- VIBRATIONS AND OSCILLATIONS
MEVTC
Computer Controlled Torsional Vibration Unit
The Computer Controlled Torsional Vibration Unit, "MEVTC", has been designed by EDIBON to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with...
COMPUTER CONTROLLED TRAY DRIER - SBANC
  • SBANC
Available
11.1.7.- DRYING AND COOLING
SBANC
Computer Controlled Tray Drier
The Computer Controlled Tray Drier "SBANC" is a laboratory scale unit designed to study fluid mechanics, surface chemistry, solids structures and mass and energy balances related to the drying process.It consists of a tunnel, several trays where...
COMPUTER CONTROLLED TUBULAR FLOW REACTOR FOR QRC - QRTC
  • Accessory of QRC
Available
11.2.- CHEMICAL REACTORS
QRTC
Computer Controlled Tubular Flow Reactor for QRC
Accessory of QRC
The Computer Controlled Tubular Flow Reactor for QRC, "QRTC", has been designed by EDIBON to conduct the kinetic study of homogeneous liquid-liquid reactions. In this unit, a continuous stream of reactants is passed through, which mix and react as...
COMPUTER CONTROLLED TWO -SHAFT GAS TURBINE - TGDEC
  • TGDEC
Available
5.4.- CONVENTIONAL ENERGIES
TGDEC
Computer Controlled Two -Shaft Gas Turbine
The main element of the Computer Controlled Two-Shaft Gas Turbine "TGDEC" is the High Pressure Turbine, which is also called Gas Generative Turbine. It consists of:Radial compressor, which is feeded by atmospheric air to compress it.Tubular...
COMPUTER CONTROLLED TWO-SHAFT GAS TURBINE/ JET ENGINE - TGDEPC
  • TGDEPC
Available
5.4.- CONVENTIONAL ENERGIES
TGDEPC
Computer Controlled Two-Shaft Gas Turbine/ Jet Engine
The main element of the Computer Controlled Two-Shaft Gas Turbine/ Jet Engine, "TGDEPC", is the High Pressure Turbine, which is also called Gas Generative Turbine. It consists of:Radial compressor, which is feeded by atmospheric air to compress...
COMPUTER CONTROLLED TWO-STAGE COMPRESSOR TEST UNIT - HCDEC
  • HCDEC
Available
8.7.5.- COMPRESSORS
HCDEC
Computer Controlled Two-Stage Compressor Test Unit
The Computer Controlled Two-Stage Compressor Test Unit, "HCDEC", works with compressed air and presents as a principal device a compression bench with two pistons, low and high pressure.This unit presents four circuits or work dispositions which...
COMPUTER CONTROLLED UNIT TO STUDY FLOW THROUGH PACKED COLUMNS - FPCC
  • FPCC
Available
11.1.8.- ABSORPTION AND ADSORPTION
FPCC
Computer Controlled Unit to Study Flow through Packed Columns
The main element of the "FPCC" unit is a transparent packed column, which can be used with water, air or both fluids, simulating an absorption column. When working with water, the unit includes a computer controlled speed pump to impel the water...
COMPUTER CONTROLLED UNIT TO STUDY THE EFFICIENCY OF A HEATING SYSTEM - TEHSC
  • TEHSC
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TEHSC
Computer Controlled Unit to Study the Efficiency of a Heating System
The Computer Controlled Unit to Study the Efficiency of a Heating System, "TEHSC",designed by EDIBON allows for studying and analyzing a closed heating system made upof pipes with different diameter and fittings normally used in real heating...
COMPUTER CONTROLLED UNIT TO STUDY WATER FLOW PRINCIPLES - WFPC
  • WFPC
Available
8.4.- FLOW VISUALIZATION
WFPC
Computer Controlled Unit to Study Water Flow Principles
The Computer Controlled Unit to Study Water Flow Principles, "WFPC", is composed by both a closed and an open water circuit, thus allowing the observation of fluid's behavior in each of them. The selection of the circuit can be made by means of a...
COMPUTER CONTROLLED VAPOUR-COMPRESSION REFRIGERATION UNIT - TRCVC
  • TRCVC
Available
9.4.- REFRIGERATION
TRCVC
Computer Controlled Vapour-Compression Refrigeration Unit
The Computer Controlled Vapour-Compression Refrigeration Unit, "TRCVC", allows the understanding of the vapor-compression refrigeration process by changing the operation of the different parts of the process, and to study the response of the...
COMPUTER CONTROLLED VERTICAL THREE-PHASE SEPARATOR - VTSC
  • VTSC
Available
11.1.11.- FILTRATION, SEDIMENTATION AND MIXING
VTSC
Computer Controlled Vertical Three-phase Separator
The Computer Controlled Vertical Three-phase Separator, "VTSC", designed by EDIBON, is a unit that allows the study of the main characteristics of gravity separation and the effect of viscosity, flow and density difference in this separation.Two...
COMPUTER CONTROLLED WATER HAMMER UNIT - EGAC
  • EGAC
Available
8.8.- FLUID PIPING SYSTEM
EGAC
Computer Controlled Water Hammer Unit
The Computer Controlled Water Hammer Unit, "EGAC", is designed to demonstrate the effects of an instantaneous variation of the speed of a fluid. It is possible to study the water hammer, which is the consequence of a quick change in a fluid speed....
COMPUTER CONTROLLED WATER QUALITY CONTROL UNIT - PCCAC
  • PCCAC
Available
13.3.- WASTEWATER TREATMENT
PCCAC
Computer Controlled Water Quality Control Unit
Water is impelled by a pump from a supply tank towards a first transparent tank equipped with a stirrer and a conductivity sensor. Conductivity is regulated in this tank by the addition of diluted caustic soda impelled by a computer controlled...
Ask for information