AE-PLC-ST Station de Forage

6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL

SYSTEMES INNOVANTS

The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC.

Voir description générale

Catalogue

Spécifications du Concours

Expansions

ICAI

Logiciel Interactif pour l'Enseignement assisté par Ordinateur

Description Générale

The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.

The "AE-PLC-ST" workstation is designed as a modular system to facilitate the understanding of the unit. The main components are:

The PLC: is composed by the CPU PLC unit and all the extra modules needed to perform a correct working of the workstation.
The control panel: with start/stop button, emergency pushbutton, reset button, light indicators to show current state of the process, etc.
The workstation: is composed by real industrial components used by the industrial drilling systems such as presence sensors, electric driller, electric linear actuators, etc.

The "AE-PLC-ST" is an independent workstation that can work alone and/or in conjunction with other workstation to make up a complete Flexible Manufacturing system*.

*The Flexible manufacturing systems product list is available at "Flexible Manufacturing Systems (FMS)" area of the general catalogue.

ÉLÉMENTS REQUIS

ÉLÉMENTS SUPPLÉMENTAIRES RECOMMANDÉS

AE-AS

UNITÉS SIMILAIRES DISPONIBLES

AE-PLC-FT

Available

6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL

AE-PLC-FT

Station de Travail de Filtration

The "AE-PLC-FT" is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the filter using a pump and different types of...

AE-PLC-MS

Available

6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL

AE-PLC-MS

Station de Travail Mixte

The "AE-PLC-MS" is a mixing system commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different valves. The system is equipped with flow...

AE-PLC-PHD

Available

6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL

AE-PLC-PHD

Station de Poinçonnage

The "AE-PLC-PHD" is a processing workstation commanded by a PLC. This unit takes a piece and introduces it inside the punching zone that is protected with a polycarbonate screen. Once the piece is inside the punching zone, the hydraulic punching...

AE-PLC-FS

Available

6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL

AE-PLC-FS

Station de Remplissage

The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....

AE-PLC-CRS

Available

6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL

AE-PLC-CRS

Station de Travail en Liège

The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...

AE-PLC-APB

Available

6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL

AE-PLC-APB

Poste de Travail d'Ouverture de Bouteille

The "AE-PLC-APB" is a bottles opening system commanded by a PLC. The unit is equipped with different containers and a retention system based on a cylinder, in order to allow the Robotic Arm Workstation "AE-BR" or the SCARA Arm Workstation "AE-SCA"...

AE-PLC-M

Available

6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL

AE-PLC-M

Station de Montage

The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...

AUTOMATIC PRESSING WORKSTATION - AE-PLC-P

AE-PLC-P

Available

6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL

AE-PLC-P

Station de Pressage Automatique

The "AE-PLC-P" is an automatic pressing workstation commanded by a PLC. The "AE-PLC-P" moves the pieces from the input zone tothe pressing zone, once the piece is detected in the pressing zone, the "AE-PLC-P" emulates pressing the pieces with a...

AE-PLC-AT

Available

6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL

AE-PLC-AT

Station de Vis Automatique

The "AE-PLC-AT" is an automatic screw workstation commanded by a PLC that supply and mount four screws in a piece. The "AE-PLC-AT" keeps the screws in a vertical storage. The workstation take the screws, one by one, and a pneumatic manipulator...

AE-PLC-MEMB

Available

6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL

AE-PLC-MEMB

Station d'Embouteillage

The "AE-PLC-MEMB" is a bottling workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-MEMB" transport the input bottles, to the filling area. In this zone, the "AE-PLC-MEMB" fills...

AE-PLC-MET

Available

6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL

AE-PLC-MET

Station d'Étiquetage

The "AE-PLC-MET" is an automatic labelling machine commanded by a PLC. The "AE-PLC-MET" also include a transporting system that carries the incoming bottles to the labelling zone, supplying the bottles one by one.The "AE-PLC-MET" workstation is...

AE-PLC-SMOLD

Available

6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL

AE-PLC-SMOLD

Station de Moulage

The "AE-PLC-SMOLD" is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a molding process by punching the piece with...

AE-PLC-SCOR

Available

6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL

AE-PLC-SCOR

Station de Découpe

The "AE-PLC-SCOR" is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine simulate the process.The "AE-PLC-SCOR"...

CONTROL PROCESSES WORKSTATION - AE-PLC-CP

AE-PLC-CP

Available

6.2.5.2.- TRAITEMENT DES APPLICATIONS DE POSTES DE TRAVAIL

AE-PLC-CP

Poste de Travail de Processus de Contrôle Industriel

The "AE-PLC-CP" is a process control workstation commanded by a PLC that coordinates the work of 3 industrial controllers that regulates in parallel the level, flow rate, temperature and pressure processes. The "AE-PLC-CP" workstation has been...