14.- GÉNIE BIOMÉDICAL

La Génie Biomédical étudie la mise en œuvre des connaissances en ingénierie dans le domaine de la biologie et de la médecine. La combinaison de instrumentation et de systèmes de contrôle électronique et l'application d'algorithmes mathématiques et de principes physiques et chimiques permettent à Génie biomédical d'étudier et de développer de nouvelles techniques et de nouveaux dispositifs pour la résolution de problèmes cliniques. Cette discipline va de la conception d'éléments de diagnostic et de logiciels médicaux aux outils d'analyse physiologique pour l'étude du cœur ou du système de rendez-vous .

Voir plus

La Génie Biomédical a évolué au fil des ans grâce aux progrès scientifiques et technologiques. Actuellement, des dispositifs tels que les systèmes de surveillance des signes vitaux ou les dispositifs de diagnostic facilitent le travail de soins médicaux. Le développement de méthodes d'analyse d'images telles que rayons X, ultrasons et résonance magnétique permettent d'étudier l'organisme humain de manière claire et rapide. En outre, les logiciels de gestion hospitalière télémédecine et hôpital sont utilisés.

Le futur du génie biomédical a encore un long chemin à parcourir, car la société actuelle exige des solutions médicales rapides et efficaces. Les appareils électroniques utilisés au quotidien permettront de suivre les valeurs des signes vitaux du patient à distance, de pouvoir analyser les symptômes avant un problème de santé et, même, de prévenir ce problème éventuel. Une autre tendance du génie biomédical est la simplification des outils de laboratoire. Des systèmes, tels que Lab On a Chip (LOC), intègrent les fonctions de laboratoire dans une seule puce. De nouvelles techniques robotiquechirurgie, de nouveaux matériaux organiques pour la fabrication de tissus artificiels et de tissus régénératifs ou l'impression en 3D d'organes artificiels permettront de répondre aux besoins médicaux futurs.

Voir les produits
Matériels Associés
SOUS-CATÉGORIES DE GÉNIE BIOMÉDICAL

14.1.- BIOMECANIQUE

Biomécanique étudie la mécanique du mouvement de l'organisme des êtres vivants, parmi lesquels le mouvement du corps humain humain. Cette étude va des mouvements les plus simples de la vie quotidienne, comme le travail ou l'activité sportive, au mouvement de certains organes internes, comme le...
Voir

14.2.- ÉLECTRONIQUE BIOMÉDICAL

Biomedical Engineering étudie l'application des connaissances en ingénierie dans le domaine de la biologie et de la médecine. L'un des domaines les plus pertinents de cette ingénierie est le domaine de l'électronique biomédicale, dans lequel les concepts de l'électronique sont appliqués pour le...
Voir

14.3.- ÉQUIPEMENT BIOMÉDICAL

Équipement Biomédical est l'ensemble des instruments utilisés dans le domaine de la médecine, biologie et pharmacologie. La conception de l'équipement biomédical est directement liée à l'instrumentation biomédicale, dans laquelle les instruments sont conçus pour obtenir des informations,...
Voir
PRODUITS DE GÉNIE BIOMÉDICAL
Affichage 49-72 de 181 article(s)
UNIT FOR STUDYING FREE VIBRATION OF A BAR - MEVLB
  • MEVLB
Available
7.1.4.- VIBRATIONS ET OSCILLATIONS
MEVLB
Unité d'Étude de Vibration Libre en Barres
The Unit for Studying Free Vibration of a Bar,"MEVLB", allows to study the features of the free vibrations of a bending bar.The natural frequency of the bending bar can be modified adding additional loads at the free end of a bar or varying the...
SIMPLE HARMONIC MOTION UNIT - MSHU
  • MSHU
Available
7.1.3.- STATIQUE ET DYNAMIQUE
MSHU
Unité de Mouvement Harmonique Simple
This Simple Harmonic Motion Unit, "MSHU", allows many experiments using several pendulums and devices, such as different types of pendulums (simple, bifilar, trifilar and Kater’s pendulum) and springs.Consists of a panel with a support that allows...
UNIT TO STUDY ROTATIONAL INERTIA - SRI
  • SRI
Available
7.1.3.- STATIQUE ET DYNAMIQUE
SRI
Unité pour l'étude du Moment d'inertie en Rotation
The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...
TORSIONAL OSCILLATIONS UNIT - MOT
  • MOT
Available
7.1.4.- VIBRATIONS ET OSCILLATIONS
MOT
Unité d'Oscillation de Torsion
The Torsional Oscillations Unit, "MOT", is intended for easy experiments. It enables to illustrate and investigate the torsional oscillation in single rotor, multi-rotor and geared systems. The unit basically consists of a rigid frame that have...
WHIRLING OF SHAFTS UNIT - MEER
  • MEER
Available
7.1.4.- VIBRATIONS ET OSCILLATIONS
MEER
Unité d'Étude de Rotation d'Axes
The Whirling of Shafts Unit, "MEER", has been designed by EDIBON to demonstrate and determine different modes of oscillation and resonance of shafts with continuous distribution of mass under different conditions.The operation of the Whirling of...
BELT FRICTION UNIT - MCF
  • MCF
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MCF
Unité de Friction sur Courroie
The Belt Friction Unit, "MCF", allows us to carry out studies and investigations to compare the driving torque for a given degree of overlap of a flat belt (leather or rope) and a V belt.With this unit the relationship between the tensions in the...
FRICTION STUDY UNIT - MEF
  • MEF
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MEF
Unité d'Étude de Friction
The Friction Study Unit, "MEF", allows the unit to illustrate the friction force by simple demonstrations.It is designed for the study of the relations between friction forces and normal forces, between hard or soft surfaces, between lubricated or...
JOURNAL BEARING UNIT - MPCO
  • MPCO
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MPCO
Unité d'Étude de la Distribution de Pression en Roulements
The Journal Bearing Unit, "MPCO", allows to study the pressure distribution in sliding bearings. It illustrates the principle of hydrodynamic lubrication.The unit is mounted on a metallic structure assembled on wheels for its mobility.The sliding...
TRIBOLOGY MODULAR UNIT - MEMT
  • MEMT
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MEMT
Unité Modulaire de Tribologie
The Tribology Modular Unit, "MEMT", consists of a base unit with electronic console and a series of experimental units to investigate and visualize tribological phenomena.MEMT-UB. Drive Unit for Tribological Tests. This unit is common for the...
DRIVE UNIT FOR TRIBOLOGICAL TESTS - MEMT-UB
  • Accessoire de MEMT
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MEMT-UB
Unité d'Entraînement pour les Tests Tribologiques
Accessoire de MEMT
This unit is common for the modules type "MEMT". It consists of a base unit and an electronic console:The Base Unit consists of a drive unit formed by a DC motor with a shaft. The motor is mounted in a reduction gear, obtaining enough torque in...
RADIAL PRESSURE DISTRIBUTION IN A JOURNAL BEARING - MEMT-1
  • Accessoire de MEMT
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MEMT-1
Distribution de la Pression Radiale dans un Palier
Accessoire de MEMT
This unit allows the visualization of the radial pressure distribution in a journal bearing with hydrodynamic lubrication.The "MEMT-1" unit consists of a journal bearing with hydrodynamic lubrication, a freely moving bearing housing with thirteen...
DYNAMIC FRICTION OF A CYLINDER ON A ROLLER - MEMT-2
  • Accessoire de MEMT
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MEMT-2
Friction Dynamique d'un Cylindre sur un Rouleau
Accessoire de MEMT
This unit allows to demonstrate the friction forces between several cylinders of different materials and a roller under different lubrication conditions.The "MEMT-2" unit consists of two levers that transmit a force applied by weights to a test...
DYNAMIC FRICTION OF A PIN ON A DISC - MEMT-3
  • Accessoire de MEMT
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MEMT-3
Friction Dynamique d'une Goupille sur un Disque
Accessoire de MEMT
This unit allows to study the friction forces between several vertical friction pins of different materials and a rotating friction disc.The end of each vertical pin is made of a different material and rubs against the rotating steel disc. The...
ROLLING FRICTION IN WHEELS - MEMT-4
  • Accessoire de MEMT
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MEMT-4
Friction par Rotation sur des Roues
Accessoire de MEMT
This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...
ELASTOHYDRODYNAMIC LUBRICATION - MEMT-5
  • Accessoire de MEMT
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MEMT-5
Lubrification Elastohydrodynamique
Accessoire de MEMT
This unit allows to investigate the thickness and characteristics of a lubricant film on a rolling sphere.The unit consists in a steel sphere and a driven glass disc.The sphere is pressed against the underside of the glass disc. The light from a...
FRICTION VIBRATION - MEMT-6
  • Accessoire de MEMT
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MEMT-6
Vibration / Friction
Accessoire de MEMT
This module allows to demonstrate the static friction, the sliding friction, the related friction vibrations and the slip-stick effects.Several weights are placed on a horizontally rotating friction disc. It is prevented from turning by a cord....
THIN CYLINDER UNIT - MCD
  • MCD
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MCD
Unité de Cylindre Mince
The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...
UNIT FOR STUDYING BEARING FRICTION - MBF
  • MBF
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MBF
Unité pour l'Étude du Frottement Porteur
L'Unité pour l'Étude du Frottement Porteur, "MBF", a été conçu par EDIBON pour étudier le frottement des roulements à billes et des roulements à rouleaux. Puisque le frottement de roulement est très faible, les essais de base de dynamique de...
BELT FRICTION UNIT WITH DYNAMOMETERS - MCF/A
  • MCF/A
Available
7.1.5.- TRIBOLOGIE (FRICTION, USURE, LUBRIFICATION)
MCF/A
Unité de Frottement des Courroies Avec Dynamomètres
The Belt Friction Unit with Dynamometers, "MCF/A", allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.With this unit it is possible to observe the relationship between...
THICK WALLED CYLINDER UNIT - MCPG
  • MCPG
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MCPG
Unité de Cylindres à Paroi Épaisse
In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...
UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG
  • MFPG
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MFPG
Unité d'Étude de Forces en Grues Fixes
The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...
SUSPENSION BRIDGE UNIT - MVS
  • MVS
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MVS
Unité de Pont Suspendu
The Suspension Bridge Unit, "MVS", consists of a deck and two parallel main cables that simulate a suspension bridge and allow the study of stress in the main cables. The deck of the bridge is simulated by a light alloy beam that is held by both...
PARABOLIC ARCH UNIT - MARP
  • MARP
Available
7.1.6.- MÉCANIQUE DES STRUCTURES
MARP
Unité d'Arc Parabolique
L'Unité d'Arc Parabolique, "MARP", contient un arc articulé préformé, qui peut être soumis à des charges ponctuelles ou uniformément réparties par au moyen de sept câbles (cordons) uniformément répartis avec des suspensions.L'un des supports de...
Demander des informations