2.- ELECTRONICS

Electronics is the branch of physics focused on the behavior of electrons. In engineering, electronics is the part that studies and develops electronic circuits so that the electrons circulating through them have the behavior required by the specifications of the application.

View more

Electronics has been one of the most developed disciplines throughout the 20th century, going from having a very limited application as power supplies to having a great impact on society. Some examples of key electronic applications to understand this great influence are the sensors and meters of all kinds of physical quantities such as pressure level, flow level and temperature measurement, the use of electronic amplifiers and filters, the development of integrated circuits, microprocessors and personal computers, the development of transistors of different technologies such as MOSFET, JFET, BJT, IGBT, etc.

Electronics applications are almost endless, and new contributions are improved and added each year. Depending on the application of the electronic circuits the following groups are differentiated: analog electronics and digital electronics depending on whether binary or analog signals are used, power electronics depending on whether high electric currents and electric voltages are used, electronic instrumentation depending on whether they are used to make electronic measurements of physical quantities, etc.

The future of electronics focuses on the miniaturization of electronic components, increasing their efficiency and speed. In this work, the discovery of revolutionary new materials, such as graphene or silicene, is of key importance.

View Products
Related Materials
ELECTRONICS SUBCATEGORIES

2.1.- POWER SUPPLIES, MEASUREMENT EQUIPMENT AND ACCESSORIES

The electronic laboratory equipment is the set of instruments required to carry out the experimentation in a practical session of electronics. The characteristics of the equipment will depend on the theoretical level of the laboratory to be equipped, whether it is a technical high school, a...
View

2.2.- KITS FOR CIRCUITS ASSEMBLY

The electronic development phase of a device is a group of stages carried out to obtain a product that meets the required specifications.The most characteristic stages of any electronic device development are: defining the equipment specifications, designing the different electronic circuits that...
View

2.3.- THEORETICAL - PRACTICAL FUNDAMENTALS

The electronics fundamentals are the set of knowledge aimed at providing the student with a solid base to analyze and understand the general operation of the most common electronic circuits, and the individual function of the electronic components that compose them.Acquiring a good theoretical...
View

2.4.- INDUSTRIAL ELECTRONICS

Industrial electronics is a branch of electronic engineering that focuses on industrial-grade electronic systems. One of the most important branches of industrial electronics is power electronics, which is responsible for the development of electronic applications that control and regulate high...
View

2.5.- AUTOMOTIVE ELECTRONICS

Automotive electronics is the branch of electronic engineering focused exclusively on the development of electrical and electronic systems specially designed to be installed in the car. All the systems developed in automotive electronics are adapted to withstand the harsh operation conditions in...
View
ELECTRONICS UNITS
Showing 91-120 of 122 item(s)
TEMPERATURE CONTROL MODULE - RYC-TE
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-TE
Temperature Control Module
Accessory of RYC, RYC/T
The "RYC-TE" Temperature Control module has been designed to study a practical control system, through the control of the water temperature in a tank.The "RYC-TE" module consists of two main components: the "RYC-TE" apparatus and the "RYC-TE"...
PRESSURE CONTROL MODULE - RYC-P
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-P
Pressure Control Module
Accessory of RYC, RYC/T
The "RYC-P" Pressure Control module has been designed to study a practical control system, through the control of the air pressure level of an air pressure tank.The "RYC-P" module consists of two main components: the "RYC-P" apparatus and the...
LEVEL CONTROL MODULE - RYC-N
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-N
Level Control Module
Accessory of RYC, RYC/T
The "RYC-N" Level Control module has been designed to study a practical control system, through the control of the water level of a tank.The "RYC-N" module consists of two main components: the "RYC-N" apparatus and the "RYC-N" interface box. The...
FLOW RATE CONTROL MODULE - RYC-C
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-C
Flow Rate Control Module
Accessory of RYC, RYC/T
The "RYC-C" Flow Rate Control module has been designed to study a practical control system, through the flow rate of a close water circuit.The "RYC-C" module consists of two main components: the "RYC-C" apparatus and the "RYC-C" interface box. The...
LUMINOSITY CONTROL MODULE - RYC-I
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-I
Luminosity Control Module
Accessory of RYC, RYC/T
The "RYC-I" Luminosity Control module has been designed to study a practical control system and study different light sensors, through the luminosity control with three different light sensors.The "RYC-I" module consists of two main components:...
PH CONTROL MODULE - RYC-pH
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-pH
pH Control Module
Accessory of RYC, RYC/T
The "RYC-pH" pH Control module has been designed to study a practical control system, through the pH dissolution control in a stirred tank.The "RYC-pH" module consists of two main components: "RYC-pH" apparatus and "RYC-pH" interface box. The...
POSITION CONTROL MODULE - RYC-CP
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-CP
Position Control Module
Accessory of RYC, RYC/T
The "RYC-CP" Position Control module has been designed to study a practical control system, through the control of a linear position system.The "RYC-CP" module consists of two main components: the "RYC-CP" apparatus and the "RYC-CP" interface box....
SERVOMOTOR INDUSTRIAL APPLICATION - AE-SMI
  • AE-SMI
Available
2.4.2.- ELECTRICAL SERVOMOTORS
AE-SMI
Servomotor Industrial Application
The Servomotor Industrial Application, "AE-SMI", is designed to perform up to seven controls used in motion technology: position control,speed control, torque control, position and speed control, speed and torque control and the full-closed...
BRUSHLESS MOTOR INDUSTRIAL APPLICATION - AE-BMI
  • AE-BMI
Available
2.4.2.- ELECTRICAL SERVOMOTORS
AE-BMI
Brushless Motor Industrial Application
The Brushless Motor Industrial Application, "AE-BMI", is designed to perform the most common control used in the industry: the position control. The "AE-BMI" application allows the student to configure up to four positions with all the parameters...
SERVOSYSTEMS BASIC UNIT FOR DC MOTORS - SERIN/CCB
  • SERIN/CCB
Available
6.1.2.2.- POWER ELECTRONICS AND INDUSTRIAL ELECTRONICS
SERIN/CCB
Servosystems Basic Unit for DC Motors
"SERIN/CCB" is an unit whose goal is studying low power servo systems. It is a low power DC motor speed control trainer that has a breakdown simulator. This trainer is a basic version of the Advanced and Computerised "SERIN/CC" Trainer, being...
1 KW AC INDUSTRIAL SERVOMOTOR APPLICATION - AEL-SERIN/CA-1KW
  • AEL-SERIN/CA-1KW
Available
6.1.2.2.- POWER ELECTRONICS AND INDUSTRIAL ELECTRONICS
AEL-SERIN/CA-1KW
1 kW AC Industrial Servomotor Application
The 1 kW AC Industrial Servomotor Application, "AEL-SERIN/CA-1KW", has been designed to study the working principle and control of industrial servomotors. The "AEL-SERIN/CA-1KW" allows the user to acquire knowlegde and experience in the control of...
POWER ELECTRONICS APPLICATION, WITH SCADA - AEL-PWEC
  • AEL-PWEC
Available
5.1.3.2.- POWER TRANSMISSION
AEL-PWEC
Power Electronics Application, with SCADA
The Power Electronics Application, with SCADA, "AEL-PWEC", has been designed to study the most important applications related to DC power electronics, single-phase AC power electronics, three-phase AC power electronics and thyristor power...
WIND POWER PLANTS WITH INDUCTION GENERATOR APPLICATION - AEL-WPPI
  • AEL-WPPI
Available
5.3.3.- WIND ENERGY
AEL-WPPI
Wind Power Plants with Induction Generator Application
The Wind Power Plants with Induction Generator Application, "AEL-WPPI", has been developed by EDIBON to study the wind turbines electrical performance with three-phase induction generators of squirrel cage that inject power in the network.Wind...
COMPUTER CONTROLLED HYBRID AND ELECTRIC VEHICLES APPLICATION - AEL-EHVC
  • AEL-EHVC
Available
2.5.- AUTOMOTIVE ELECTRONICS
AEL-EHVC
Computer Controlled Hybrid and Electric Vehicles Application
The Computer Controlled Hybrid and Electric Vehicles Application, "AEL-EHVC", is an application designed by EDIBON for the theoretical and practical training of the different topologies of electric/hybrid vehicles most used today.Given the...
AUTOMOTIVE FUNDAMENTAL ELECTRONIC CIRCUITS UNIT - AV-EC
  • AV-EC
Available
2.5.- AUTOMOTIVE ELECTRONICS
AV-EC
Automotive Fundamental Electronic Circuits Unit
The Automotive Fundamental Electronic Circuits Unit, "AV-EC", provides a practical solution to the introduction of electronics in the automotive field with a group of common circuits used in the automobiles nowadays.The circuits included in the...
AUTOMOTIVE FUNDAMENTAL ELECTRICAL CIRCUITS UNIT - AV-ELC
  • AV-ELC
Available
2.5.- AUTOMOTIVE ELECTRONICS
AV-ELC
Automotive Fundamental Electrical Circuits Unit
The Automotive Fundamental Electrical Circuits Unit, "AV-ELC", provides a practical solution to the introduction of electricity in the automotive field with a group of common circuits used by the automobiles today.The circuits included in the...
AUTOMOTIVE ACTUATORS UNIT - AV-A
  • AV-A
Available
2.5.- AUTOMOTIVE ELECTRONICS
AV-A
Automotive Actuators Unit
The Automotive Actuators Unit, "AV-A", provides a practical solution to become familiar with the actuators used in today’s automobiles.The Automotive Actuators Unit, "AV-A", is composed by real actuators and components used in present automotive...
AUTOMOTIVE WIPER WASHER UNIT - AV-WW
  • AV-WW
Available
2.5.- AUTOMOTIVE ELECTRONICS
AV-WW
Automotive Wiper Washer Unit
The Automotive Wiper Washer Unit, "AV-WW", provides a practical solution to the introduction of the components of the wiper washer system used in the automotive field nowadays.The components included in the "AV-WW" are focused on different...
AUTOMOTIVE ENGINE COOLING CIRCUIT UNIT - AV-ECC
  • AV-ECC
Available
2.5.- AUTOMOTIVE ELECTRONICS
AV-ECC
Automotive Engine Cooling Circuit Unit
The Automotive Engine Cooling Circuit Unit, "AV-ECC", provides a practical solution to the introduction of the engine cooling systems electronics used in the automotive field nowadays.The components included in the "AV-ECC" are focused on...
AUTOMOTIVE AUXILIARY COMPONENTS UNIT - AV-AC
  • AV-AC
Available
2.5.- AUTOMOTIVE ELECTRONICS
AV-AC
Automotive Auxiliary Components Unit
The Automotive Auxiliary Components Unit, "AV-AC", provides a practical solution to obtain advance knowledge in the electronic and electric systems used in the automotive field today.All sensors and actuators included in the "AV-AC" unit are...
AUTOMOTIVE ELECTRONIC CONTROL DEVICE UNIT - AV-ECD
  • AV-ECD
Available
2.5.- AUTOMOTIVE ELECTRONICS
AV-ECD
Automotive Electronic Control Device Unit
The Automotive Electronic Control Device Unit, "AV-ECD", provides a practical solution to the introduction of electronic control units or ECUs.The Automotive Electronic Control Device Unit, "AV-ECD", is composed of an Electronic Control Unit (ECU)...
AUTOMOTIVE SENSORS UNIT - AV-S
  • AV-S
Available
2.5.- AUTOMOTIVE ELECTRONICS
AV-S
Automotive Sensors Unit
The Automotive Sensors Unit, "AV-S", provides a practical solution to familiarize the students with the sensors used in modern automotive systems.The Automotive Sensors Unit, "AV-S", is composed of real sensors and components used in current...
AUTOMOTIVE STARTING AND CHARGING SYSTEMS UNIT - AV-SCS
  • AV-SCS
Available
2.5.- AUTOMOTIVE ELECTRONICS
AV-SCS
Automotive Starting and Charging Systems unit
The Automotive Starting and Charging Systems unit, "AV-SCS", has been designed by EDIBON to provide theoretical and practical trainingin the field of electrical starting and charging systems for motor vehicles. This unit aims to provide students...
Ask for information