2.- ELECTRONICS

Electronics is the branch of physics focused on the behavior of electrons. In engineering, electronics is the part that studies and develops electronic circuits so that the electrons circulating through them have the behavior required by the specifications of the application.

View more

Electronics has been one of the most developed disciplines throughout the 20th century, going from having a very limited application as power supplies to having a great impact on society. Some examples of key electronic applications to understand this great influence are the sensors and meters of all kinds of physical quantities such as pressure level, flow level and temperature measurement, the use of electronic amplifiers and filters, the development of integrated circuits, microprocessors and personal computers, the development of transistors of different technologies such as MOSFET, JFET, BJT, IGBT, etc.

Electronics applications are almost endless, and new contributions are improved and added each year. Depending on the application of the electronic circuits the following groups are differentiated: analog electronics and digital electronics depending on whether binary or analog signals are used, power electronics depending on whether high electric currents and electric voltages are used, electronic instrumentation depending on whether they are used to make electronic measurements of physical quantities, etc.

The future of electronics focuses on the miniaturization of electronic components, increasing their efficiency and speed. In this work, the discovery of revolutionary new materials, such as graphene or silicene, is of key importance.

View Products
Related Materials
ELECTRONICS SUBCATEGORIES

2.1.- POWER SUPPLIES, MEASUREMENT EQUIPMENT AND ACCESSORIES

The electronic laboratory equipment is the set of instruments required to carry out the experimentation in a practical session of electronics. The characteristics of the equipment will depend on the theoretical level of the laboratory to be equipped, whether it is a technical high school, a...
View

2.2.- KITS FOR CIRCUITS ASSEMBLY

The electronic development phase of a device is a group of stages carried out to obtain a product that meets the required specifications.The most characteristic stages of any electronic device development are: defining the equipment specifications, designing the different electronic circuits that...
View

2.3.- THEORETICAL - PRACTICAL FUNDAMENTALS

The electronics fundamentals are the set of knowledge aimed at providing the student with a solid base to analyze and understand the general operation of the most common electronic circuits, and the individual function of the electronic components that compose them.Acquiring a good theoretical...
View

2.4.- INDUSTRIAL ELECTRONICS

Industrial electronics is a branch of electronic engineering that focuses on industrial-grade electronic systems. One of the most important branches of industrial electronics is power electronics, which is responsible for the development of electronic applications that control and regulate high...
View

2.5.- AUTOMOTIVE ELECTRONICS

Automotive electronics is the branch of electronic engineering focused exclusively on the development of electrical and electronic systems specially designed to be installed in the car. All the systems developed in automotive electronics are adapted to withstand the harsh operation conditions in...
View
ELECTRONICS UNITS
Showing 61-90 of 122 item(s)
OPTOELECTRONICS KIT - M14/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M14/KIT
Optoelectronics Kit
Accessory of M-KITS
With Optoelectronics Kit, "M14/KIT", designed by EDIBON, the main light emitters and liquid crystal displays (LCD), photoconductive cells, fibre optics, infrared, etc. can be studied.
ELECTRIC NETWORKS KIT - M16/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M16/KIT
Electric Networks Kit
Accessory of M-KITS
With the Electric Networks Kit, "M16/KIT", designed by EDIBON, it is possible to understand the principles of Ohm’s Law, Norton’s and Thévenin’s Theorem, Wheatstone bridge operation, superposition theorems or star/delta transformation and viceversa.
THREE-PHASE CIRCUITS KIT - M18/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M18/KIT
Three-phase Circuits Kit
Accessory of M-KITS
The Three-phase Circuits Kit, "M18/KIT", designed by EDIBON, is used to study the generation of three-phase systems, load balancing between phases, operation of three-phase rectifiers, etc.
COMPUTER CONTROLLED A/D AND D/A CONVERTERS UNIT - CADDA
  • CADDA
Available
14.2.1.3.- DIGITAL ELECTRONICS
CADDA
Computer Controlled A/D and D/A Converters Unit
The Computer Controlled A/D and D/A Converters Unit, "CADDA", unit has been designed to help the students to learn how to perform the most common procedures and study the different circuits used to convert analog signals in a digital signals and...
WEIGHING SYSTEM, WITH COMPUTER DATA ACQUISITION - SPC
  • SPC
Available
14.2.2.- INSTRUMENTATION AND CONTROL
SPC
Weighing System, with Computer Data Acquisition
The Weighing System, with Computer Data Acquisition "SPC" consist of a digital force meter that allows to determine both the mass and weight of a body (traction) as well as to determine compression forces.It has different adaptors according to the...
PRESSURE SENSORS CALIBRATION SYSTEM - SCSP
  • SCSP
Available
14.2.2.- INSTRUMENTATION AND CONTROL
SCSP
Pressure Sensors Calibration System
The Pressure Sensors Calibration System, "SCSP", is mainly composed of two pressure manometers on one hand, one measuring up to 1000 millimeters of water or 100 millibars and the other one measuring up to 2.5 bars and on the other hand, two vacuum...
MODULAR SYSTEM FOR THE STUDY OF SENSORS - BS
  • BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BS
Modular System for the Study of Sensors
The Modular System for the Study of Sensors, "BS", designed by EDIBON, includes a wide range of units that include different electronic components designed to control the signal produced by the transducers (sensors and actuators) on the one hand,...
COMPUTER CONTROLLED BASE UNIT FOR BS - BSPC
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BSPC
Computer Controlled Base Unit for BS
Accessory of BS
The BSPC is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned before a data acquisition system can effectively and accurately acquire the signal. These circuits consist...
BASE UNIT FOR BS - BSUB
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BSUB
Base Unit for BS
Accessory of BS
The BSUB is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned. These circuits consist of differential and instrumentation amplifiers, filters, current to voltage and...
VIBRATIONS AND/OR DEFORMATIONS TEST MODULE - BS1
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BS1
Vibrations and/or Deformations Test Module
Accessory of BS
Vibrations and/or Deformations Test Module, "BS1" has been designed to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is the one...
TEMPERATURE TEST MODULE - BS2
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BS2
Temperature Test Module
Accessory of BS
The Temperature Test Module, "BS2", has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space....
PRESSURE TEST MODULE - BS3
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BS3
Pressure Test Module
Accessory of BS
The Pressure Test Module, "BS3", has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques. On the left upper side of the module there is a pressure...
FLOW TEST MODULE - BS4
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BS4
Flow Test Module
Accessory of BS
The objective of Flow Test Module, "BS4", is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve tank,...
OVENS TEST MODULE - BS5
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BS5
Ovens Test Module
Accessory of BS
With the Ovens Test Module, "BS5", is possible to study temperature measurement techniques using several kinds of sensors placed inside the sealed place that is used as oven.This module is basically made up of an oven that contains a changeable...
LIQUID LEVEL TEST MODULE - BS6
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BS6
Liquid level Test Module
Accessory of BS
The Liquid level Test Module, "BS6", has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...
TACHOMETER TEST MODULE - BS7
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BS7
Tachometer Test Module
Accessory of BS
The Tachometer Test Module, "BS7", has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...
PROXIMITY TEST MODULE - BS8
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BS8
Proximity Test Module
Accessory of BS
The Proximity Test Module, "BS8", has been designed to teach techniques to detect the proximity of objects, focusing on the distance at which each sensor is able to detect the object and the type of material it can detect. In the upper part there...
PNEUMATIC TEST MODULE - BS9
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BS9
Pneumatic Test Module
Accessory of BS
The Pneumatics Test Module, "BS9", has been designed to teach techniques of control and handling of a pneumatic piston.All connections of the different BS9 mechanisms will have output through a group of 2 mm. terminals. They are placed in the...
LIGHT TEST MODULE - BS10
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BS10
Light Test Module
Accessory of BS
The objective of the Light Test Module, "BS10", is to show some of the techniques used to measure light or illumination intensity.The module is equipped with a lamp whose light intensity can be controlled by the variation of the voltage...
TRANSDUCERS AND INSTRUMENTATION UNIT - SAIT
  • SAIT
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
SAIT
Transducers and Instrumentation Unit
The Transducers and Instrumentation Unit, "SAIT", has been designed by EDIBON to show most of the devices used in the industry that allow the electronic systems to communicate with the real world, to measure physical variables and to control...
BASIC TEACHING UNIT FOR THE STUDY OF REGULATION AND CONTROL - RYC/B
  • RYC/B
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC/B
Basic Teaching Unit for the Study of Regulation and Control
The Basic Teaching Unit for the Study of Regulation and Control, "RYC/B", allows the user to learn the basics about regulation and control of first and second order systems.This unit enables to carry a set of practices related with basic...
COMPUTER CONTROLLED MODULAR CONTROL AND REGULATION UNIT - RYC/T
  • RYC/T
Available
10.1.- THEORETICAL - PRACTICAL FUNDAMENTALS
RYC/T
Computer Controlled Modular Control and Regulation Unit
Regulation and control theory is divided into two major divisions in, namely, classical and modern. The implementation of classical controller designs as compared to systems designed using modern control theory is easier and these controllers are...
BALL AND BEAM MODULE - RYC-BB
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-BB
Ball and Beam Module
Accessory of RYC, RYC/T
The "RYC-BB" Ball and Beam module has been designed to study a practical control system, through the study of a classical control system, the Ball and Beam Control system.The "RYC-BB" module consists of two main components: the "RYC-BB" apparatus...
DC SERVO MOTOR MODULE - RYC-SM
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-SM
DC Servo Motor Module
Accessory of RYC, RYC/T
The "RYC-SM" Servo Motor module has been designed to study a practical control system, through the control of the position and speed of a DC Servo Motor.The "RYC-SM" module consists of two main components: the "RYC-SM" apparatus and the "RYC-SM"...
AIR FLOW TEMPERATURE CONTROL MODULE - RYC-TAR
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-TAR
Air Flow Temperature Control Module
Accessory of RYC, RYC/T
The "RYC-TAR" Air Flow Temperature Control module has been designed to study a practical control system, through the control of an air flow temperature.The "RYC-TAR" module consists of two main components: the "RYC-TAR" apparatus and the "RYC-TAR"...
INVERTED PENDULUM CONTROL MODULE - RYC-PI
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-PI
Inverted Pendulum Control Module
Accessory of RYC, RYC/T
The "RYC-PI" Inverted Pendulum Control module has been designed to study a practical control system, through the control of a linear position system of movable cart.The "RYC-PI" module consists of two main components: the "RYC-PI" apparatus and...
MAGNETIC LEVITATION CONTROL MODULE - RYC-CLM
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-CLM
Magnetic Levitation Control Module
Accessory of RYC, RYC/T
The "RYC-CLM" Magnetic Levitation Control module has been designed to study a practical control system.The "RYC-CLM" module consists of two main components: the "RYC-CLM" apparatus and the "RYC-CLM" interface box. The "RYC-CLM" apparatus contains...
WATER FLOW TEMPERATURE CONTROL MODULE - RYC-TAG
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-TAG
Water Flow Temperature Control Module
Accessory of RYC, RYC/T
The "RYC-TAG" Water Flow Temperature Control module has been designed to study a practical control system, through the control of water flow temperature.The "RYC-TAG" module consists of two main components: the "RYC-TAG" apparatus and the...
Ask for information