Best sales

Best sellers

Showing 841-870 of 921 item(s)

THERMAL SOLAR ENERGY BASIC UNIT - MINI-EEST

MINI-EEST

Available

5.3.2.- SOLAR THERMAL ENERGY

MINI-EEST

Thermal Solar Energy Basic Unit

This unit is a system that transforms solar energy into usable thermal energy.This unit uses the thermosiphon system to heat water or the traditional pumping system. In both cases, the absorbed thermal energy is given by the simulated solar...

EEST

Available

5.3.2.- SOLAR THERMAL ENERGY

EEST

Thermal Solar Energy Unit

The Thermal Solar Energy Unit, "EEST", is a system that transforms solar energy into usable thermal energy. It uses the thermosiphon solar system to heat water or the traditional pumping system. In both cases, the absorbed thermal energy is given...

MCPG

Available

7.1.6.- STRUCTURAL MECHANICS

MCPG

Thick Walled Cylinder Unit

In the Thick-Walled Cylinder Unit, "MCPG", designed by EDIBON, the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum...

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MCD

Thin Cylinder Unit

The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...

THREE AXES HEAT TRANSFER UNIT FOR TSTCC - TXC/TE

Accessory of TSTCC

Available

9.6.- HEAT TRANSFER

TXC/TE

Three Axes Heat Transfer Unit for TSTCC

Accessory of TSTCC

TXC/TE. Three Axes Heat Transfer Unit for TSTCC: study of heat transfer by studying the direction in the three axes.Bench-top unit designed to carry out heat transfer experiments and exercises studying the direction in three axes.

MART

Available

7.1.6.- STRUCTURAL MECHANICS

MART

Three-Hinged Arch Unit

The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...

N-M18

Available

14.2.1.1.- BASIC ELECTRICAL LAWS CONCEPTS

N-M18

Three-phase Circuits Module

Three-phase voltage is essentially a system of three alternating voltages, coupled (all 3 are produced simultaneously in a generator) and 120º out of phase with each other (i.e. one third of the period).The Three-phase Circuits Module, "N-M18",...

THREE-PHASE INSTALLATIONS FAULTS APPLICATION - AEL-AD33T

AEL-AD33T

Available

4.1.2.2.- ELECTRICAL RISKS AND PROTECTIONS

AEL-AD33T

Three-phase Installations Faults Application

The Three-phase Installations Faults Application, "AEL-AD33T", has been designed to study several protections belonging to industrial installations. Through safety elements, the students can simulate different faults and verify the reasons why...

THREE-PHASE TRANSFORMER APPLICATION - AEL-TPTT

AEL-TPTT

Available

4.3.1.- TRANSFORMERS APPLICATIONS

AEL-TPTT

Three-Phase Transformer Application

The Three-Phase Transformer Application, "AEL-TPTT", has been designed by EDIBON to allow the students learn how to carry out different three-phase transformer tests and how they work.With this application the user will study the basic operating...

Available

7.3.2.1.- MECHANICAL TEST

MTP

Torsion and Bend Unit

The Torsion and Bend Unit, "MTP", designed by EDIBON, is a combined unit for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate...

Available

7.3.2.1.- MECHANICAL TEST

MTT

Torsion Test Unit (30Nm)

To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...

Available

7.3.2.1.- MECHANICAL TEST

MTB

Torsion Unit

The Torsion Unit, "MTB", has been designed by EDIBON to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a...

Available

7.1.4.- VIBRATIONS AND OSCILLATIONS

MOT

Torsional Oscillations Unit

The Torsional Oscillations Unit, "MOT", is intended for easy experiments. It enables to illustrate and investigate the torsional oscillation in single rotor, multi-rotor and geared systems. The unit basically consists of a rigid frame that have...

N-EM-CST

Available

6.2.2.5.- TRAFFIC & PARKING CONTROL

N-EM-CST

Traffic Signal Control

The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...

TRANSDUCERS AND INSTRUMENTATION UNIT - SAIT

SAIT

Available

6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

SAIT

Transducers and Instrumentation Unit

The Transducers and Instrumentation Unit, "SAIT", has been designed by EDIBON to show most of the devices used in the industry that allow the electronic systems to communicate with the real world, to measure physical variables and to control...

Available

3.2.1.- CODING, MODULATION AND SIGNAL PROCESSING THEORY

ELT

Transmission Lines Unit

The Transmission Lines Unit, "ELT", has been designed by EDIBON to study a standardized coaxial line to analyze realistic measurements.The Transmission Lines Unit "ELT" has been designed as integrated unit for help the student to understand the...

Accessory of LIMEBA

Available

7.1.1.- MECHANICS FUNDAMENTALS KITS

MECA3

Transmissions Experiments

Accessory of LIMEBA

Most recent machines require the transmission of motion between elements to obtain the desired mechanical result. The mechanisms studied in this module are those that transmit motion between two axles.

FME30

Available

8.1.2.- MEASUREMENT

FME30

Transparent Vortex Flow Meter

The Transparent Vortex Flow Meter, "FME30", designed by EDIBON allows to perform studies and experiments of different volumetric and mass flow measurement methods, as well as the comparison of continuous and discontinuous methods.This unit...

MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT

Tribology Modular Unit

The Tribology Modular Unit, "MEMT", designed by EDIBON, consists of a base unit with electronic console and a series of experimental units to investigate and visualize tribological phenomena.MEMT-UB. Drive Unit for Tribological Tests. This unit is...

Accessory of QRQC

Available

11.2.- CHEMICAL REACTORS

QRFT

Tubular Flow Reactor

Accessory of QRQC

The Tubular Flow Reactor, "QRFT," specifically designed by EDIBON, is intended for the kinetic study of liquid-liquid homogeneous reactions. This unit allows for a wide range of practices, including the determination of kinetic equations, the...

Accessory of QR

Available

11.2.- CHEMICAL REACTORS

QRT

Tubular Flow Reactor for QR

Accessory of QR

The Tubular Flow Reactor for QR, "QRT", has been designed by EDIBON to conduct the kinetic study of homogeneous liquid-liquid reactions.In this unit, a continuous stream of reactants is passed through, which mix and react as they flow through the...

TURBULENT FLOW HEAT EXCHANGER FOR TICC - TIFT

Accessory of TICC

Available

9.7.- HEAT EXCHANGERS

TIFT

Turbulent Flow Heat Exchanger for TICC

Accessory of TICC

Heat exchangers with turbulent flow are widely used in various industries such as chemical, food, pharmaceutical, and energy generation. These devices play a fundamental role in heating and cooling fluids, as well as in cooling systems for...

Available

7.1.6.- STRUCTURAL MECHANICS

MFL

Two Hinged Arch Unit

The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...

N-EM-AG2Z

Available

6.2.2.5.- TRAFFIC & PARKING CONTROL

N-EM-AG2Z

Two Zones Parking Garage

Accessory of HMM

Available

8.2.- MEASUREMENT

HMM-W500

U-Shape Double Manometer

Accessory of HMM

With the U-Shape Double Manometer, "HMM-W500," designed by EDIBON, the study of different pressures is facilitated for operation with the Pitot tube. The U-Shape Double Manometer allows finding the pressure between two points or two fluids.The...

Accessory of HMM

Available

8.2.- MEASUREMENT

HMM-U1000

U-Shape Manometer

Accessory of HMM

The U-Shape Manometer, "HMM-U1000," designed by EDIBON, allows the study of various pressures and their relationship with the fluid. It measures the difference in liquid level in its columns, providing vital information for pressure analysis in...

UNDERFLOOR HEATING AND/OR HEAT SOURCE FOR HEAT PUMP - UHHS

UHHS

Available

9.3.- HEAT PUMPS

UHHS

Underfloor Heating and/or Heat Source for Heat Pump

The Underfloor Heating and/or Heat pump Heat Source, "UHHS" is a laboratory unit designed to study and demonstrate the operation of underfloor heating installations and constitutes an essential tool in research and training in the field of heating...

UNDERGROUND TRANSMISSION LINES APPLICATION - AEL-TI-04

AEL-TI-04

Available

5.1.3.2.- POWER TRANSMISSION

AEL-TI-04

Underground Transmission Lines Application

The Underground Transmission Lines Application, "AEL-TI-04", has been designed to study the most important characteristics of underground transmission lines such as critical length, capacitive, characteristic impedance, energy losses, etc. Thus,...

USSB

Available

8.3.- HYDROSTATICS

USSB

Unit for Ship Stability Studies

The study of ship stability and the analysis of vibrations that can occur in a vessel are crucial aspects for the construction and development of naval engineering.The Ship Stability Study Unit, "USSB", designed by EDIBON, enables a comprehensive...

UNIT FOR STUDYING BEARING FRICTION - MBF

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MBF

Unit for Studying Bearing Friction

The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...

FOR FURTHER INFORMATION, CONTACT US