2HE Electronics Laboratory for Higher Education

ELECTRONICS LABORATORY FOR HIGHER EDUCATION - 2HE

Catalog

Expansions

PLC

PLC Industrial Process Control

ECL

EDIBON Cloud Learning

FSS

Fault Simulation System

ICAI

Interactive Computer Aided Instruction Software

ELK

EDIBON Software Development KIT, Powered by NI LabVIEW™

Modules

0210

ELEMENTARY ELECTRONICS. Basic Module

0211

ELEMENTARY ELECTRONICS. Medium Module

0212

ELEMENTARY ELECTRONICS. Advanced Module

0230

TRANSDUCERS AND SENSORS. Basic Module

0231

SENSORS INSTRUMENTATION. Basic Module

0232

CONTROLLERS. Basic Module

0240

CONTROL ELECTRONICS. Basic Module

0250

DIGITAL ELECTRONICS. Basic Module

0260

INDUSTRIAL ELECTRONICS. Basic Module

0270

MICROPROCESSORS. Basic Module

RELATED NEWS

SUPPLEMENTARY EQUIPMENT

MODULAR SYSTEM FOR THE STUDY OF SENSORS: - BS

Available

6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

Modular System for the Study of Sensors:

"BS" System includes a set of electronic components with a twofold purpose: to control the signal produced by the transducers, and to evaluate and quantify it.Sensors or transducers are common elements in the state of our technology. Therefore...

VIBRATIONS AND/OR DEFORMATIONS TEST MODULE - BS1

Available

6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS1

Vibrations and/or Deformations Test Module

This Test Module has been designed to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is the one carrying the sensors, which can have...

BS10

Available

6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS10

Light Test Module

The objective of this module is to show some of the techniques used to measure light or illumination intensity.The module is equipped with a lamp whose light intensity can be controlled by the variation of the voltage supplied.This module...

Available

6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS2

Temperature Test Module

The Temperature Test Module has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space. Temperatures...

Available

6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS3

Pressure Test Module

The Pressure Test Module has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques.On the left upper side of the module there is a pressure chamber with...

Available

6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS4

Flow Test Module

The objective this module is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve tank, using a...

Available

6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS5

Ovens Test Module

With "BS-5" Test Module is possible to study temperature measurement techniques using several kinds of sensors placed inside the sealed place that is used as oven.This module is basically made up of an oven that contains a changeable speed...

Available

6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS6

Liquid level Test Module

The Liquid Level Test Module "BS-6" has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...

Available

6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS7

Tachometer Test Module

The Tachometer Test Module "BS-7" has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...

Available

6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS8

Proximity Test Module

This Module has been designed to teach techniques to detect the proximity of objects, focusing on the distance at which each sensor is able to detect the object and the type of material it can detect.In the upper part there is a revolving disc on...

Available

6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS9

Pneumatic Test Module

The Pneumatics Test Module "BS-9" has been designed to teach techniques of control and handling of a pneumatic piston.All connections of the different BS-9 mechanisms will have output through a group of 2 mm. terminals. They are placed in the...

COMPUTER CONTROLLED BASIC UNIT FOR BS - BSPC

BSPC

Available

6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BSPC

Computer Controlled Basic Unit for BS

This unit is common for the different test modules type "BS", and can work with one or several modules. The BSPC is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned...

COMPUTER CONTROLLED A/D AND D/A CONVERTERS UNIT - CADDA

CADDA

Available

14.2.1.3.- DIGITAL ELECTRONICS

CADDA

Computer Controlled A/D and D/A Converters Unit

The Computer Controlled A/D and D/A Converters Unit, "CADDA", unit has been designed to help the students to learn how to perform the most common procedures and study the different circuits used to convert analog signals in a digital signals and...

CEAB

Available

6.1.1.2.- INDUSTRIAL CONTROLLERS

CEAB

Field Bus Applications Unit

The Trainer for Field Bus Applications, "CEAB", provides the components to conform a real Profibus DP Network where the PC is the master device and different components included with the unit are the slave devices. The "CEAB" unit also allows to...

COMPUTER CONTROLLED CONTROLLER TUNING UNIT - CEAC

CEAC

Available

6.1.1.2.- INDUSTRIAL CONTROLLERS

CEAC

Computer Controlled Controller Tuning Unit

The Computer Controlled Controller Tuning Unit, "CEAC", provides the tools to simulate different industrial processes in a HIL system and control them with a commercial industrial controller. The CEAC unit works in conjunction with a computer, in...

CECI

Available

6.1.1.2.- INDUSTRIAL CONTROLLERS

CECI

Industrial Controllers Unit

The Industrial Controllers Unit, "CECI", is based on a modular design structure whose functionality is divided into different modules toallow the student a better understanding of the unit. The modules included in the unit are: industrial...

INDUSTRIAL CONTROLLERS NETWORKING - CRCI

CRCI

Available

6.1.1.2.- INDUSTRIAL CONTROLLERS

CRCI

Industrial Controllers Networking

The Industrial Controllers Networking, "CRCI", unit is based on a modular design structure whose functionality is divided into different modules to allow the student a better understanding of the unit. The modules provided with the unit are: two...

COMPUTER CONTROLLED THREE DIMENSIONS (3D) PHYSICS - EFAC

EFAC

Available

1.1.- 3D PHYSICS

EFAC

Computer Controlled Three Dimensions (3D) Physics

The Computer Controlled Three Dimensional (3D) Physics, "EFAC", from EDIBON, allows to do practical exercises in the different fields of physics (electricity, magnetic fields, mechanics, acoustics, optics and thermodynamics).The "EFAC" is an open...

FACO

Available

2.1.- POWER SUPPLIES, MEASUREMENT EQUIPMENT AND ACCESSORIES

FACO

Power Supply

Using this power supply, training and practices can be done conventionally. This is the most common power supply used with our modules.

Available

1.1.- 3D PHYSICS

FCE

Electric Fields Study Set

The Electric Fields Study Set, "FCE", allows the spatial study of the electric field in all its dimensions: calculation of the intensity, force lines, equipotential surfaces in both static and dynamic fields, giving the student a more extensive...

Available

1.1.- 3D PHYSICS

FCM

Magnetic Field Study Set

The Magnetic Field Study Set, "FCM", allows the spatial study of the magnetic field in all its dimensions (calculation of magnetic field strength, lines of force, vector potential and equipotential lines both in static and dynamic fields). For...

BASIC ELECTRONICS AND ELECTRICITY LABORATORY: - LIEBA

LIEBA

Available

14.2.1.6.- POWER ELECTRONICS

LIEBA

Basic Electronics and Electricity Laboratory:

We present a flexible and modular-based system for learning basic electronics, basic electricity and circuit theory. The advantage given by this learning and teaching system is that the student establishes his own rhythm, thus rendering...

Available

2.3.5.- INSTRUMENTATION & CONTROL

M41

Resistance Transducers

This unit allows different practices related to resistance transducers to be carried out. The unit has five different types of transducers: PTC, NTC, LDR, strain gauge and RTD.The operation of thermistors is based on the principle that the...

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M44

Applications of Light

This unit allows different practices related to the measurement of light intensity to be carried out. Photodiodes are semiconductor light sensors that generate a current or voltage when the P-N junction in the semiconductor is illuminated with...

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M45

Linear Position and Force

Linear Variable Displacement Transducers (LVDT) provide a certain amount of voltage output relative to the parameters being measured, for example force, for signal conditioning.With Linear Position and Force Unit, "M45", designed by EDIBON, it is...

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M46

Environmental Measurements

Environmental measurement is a data collection process. In other words, it is a continuous and systematic follow-up study of environmental variables (air quality and speed, humidity, pressure, etc.). The aim is to identify and evaluate...

ROTATIONAL SPEED & POSITION CONTROL - M47

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M47

Rotational Speed & Position Control

The unit is equipped with a DC motor whose rotation speed can be controlled by the supply voltage. The following sensors are arranged along the motor shaft: optical slot sensor, inductive sensor, infrared reflection sensor, Hall effect sensor,...

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M48

Sound Measurements

With the Sound Measurement Unit, "M48", designed by EDIBON, different practices related to sound measurements can be carried out. The unit has three different types of components: two types of microphones and a loudspeaker.

Available

2.3.2.- ANALOG ELECTRONICS

M99

Analog Circuits Unit

The Analog Circuits Unit, "M99", designed by EDIBON, allows to do different practices related to basic electronics. The unit has different parts: analog multiplexer, analog multiplier, function generator, AM modulator and AM demodulator.The "M99"...

ELECTRONICS FOR MOTORS AND GENERATORS UNIT - M99-6

M99-6

Available

2.3.1.- BASIC ELECTRICAL LAWS CONCEPTS

M99-6

Electronics for Motors and Generators Unit

The Electronics for Motors and Generators Unit, "M99-6", designed by EDIBON, enables to carry out different practices related with motors and generators. The unit has different different types of motors: DC motor, AC motor and stepper motor.The...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF REGULATION AND CONTROL - RYC

Available

6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC

Computer Controlled Teaching Unit for the Study of Regulation and Control

Regulation and control theory is divided into two major divisions in, namely, classical and modern. The implementation of classical controller designs as compared to systems designed using modern control theory is easier and these controllers are...

RYC-BB

Available

6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-BB

Ball and Beam Module

The "RYC-BB" Ball and Beam module has been designed to study a practical control system, through the study of a classical control system, the Ball and Beam Control system.The "RYC-BB" module consists of two main components: the "RYC-BB" apparatus...

RYC-C

Available

6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-C

Flow Rate Control Module

The "RYC-C" Flow Rate Control module has been designed to study a practical control system, through the flow rate of a close water circuit.The "RYC-C" module consists of two main components: the "RYC-C" apparatus and the "RYC-C" interface box. The...

MAGNETIC LEVITATION CONTROL MODULE - RYC-CLM

RYC-CLM

Available

6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-CLM

Magnetic Levitation Control Module

The "RYC-CLM" Magnetic Levitation Control module has been designed to study a practical control system.The "RYC-CLM" module consists of two main components: the "RYC-CLM" apparatus and the "RYC-CLM" interface box. The "RYC-CLM" apparatus contains...

RYC-CP

Available

6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-CP

Position Control Module

The "RYC-CP" Position Control module has been designed to study a practical control system, through the control of a linear position system.The "RYC-CP" module consists of two main components: the "RYC-CP" apparatus and the "RYC-CP" interface box....

RYC-I

Available

6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-I

Luminosity Control Module

The "RYC-I" Luminosity Control module has been designed to study a practical control system and study different light sensors, through the luminosity control with three different light sensors.The "RYC-I" module consists of two main components:...

RYC-N

Available

6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-N

Level Control Module

The "RYC-N" Level Control module has been designed to study a practical control system, through the control of the water level of a tank.The "RYC-N" module consists of two main components: the "RYC-N" apparatus and the "RYC-N" interface box. The...

RYC-P

Available

6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-P

Pressure Control Module

The "RYC-P" Pressure Control module has been designed to study a practical control system, through the control of the air pressure level of an air pressure tank.The "RYC-P" module consists of two main components: the "RYC-P" apparatus and the...

RYC-pH

Available

6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-pH

pH Control Module

The "RYC-pH" pH Control module has been designed to study a practical control system, through the pH dissolution control in a stirred tank.The "RYC-pH" module consists of two main components: "RYC-pH" apparatus and "RYC-pH" interface box. The...

INVERTED PENDULUM CONTROL MODULE - RYC-PI

RYC-PI

Available

6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-PI

Inverted Pendulum Control Module

The "RYC-PI" Inverted Pendulum Control module has been designed to study a practical control system, through the control of a linear position system of movable cart.The "RYC-PI" module consists of two main components: the "RYC-PI" apparatus and...

RYC-SM

Available

6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-SM

DC Servo Motor Module

The "RYC-SM" Servo Motor module has been designed to study a practical control system, through the control of the position and speed of a DC Servo Motor.The "RYC-SM" module consists of two main components: the "RYC-SM" apparatus and the "RYC-SM"...

WATER FLOW TEMPERATURE CONTROL MODULE - RYC-TAG

RYC-TAG

Available

6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-TAG

Water Flow Temperature Control Module

The "RYC-TAG" Water Flow Temperature Control module has been designed to study a practical control system, through the control of water flow temperature.The "RYC-TAG" module consists of two main components: the "RYC-TAG" apparatus and the...

AIR FLOW TEMPERATURE CONTROL MODULE - RYC-TAR

RYC-TAR

Available

6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-TAR

Air Flow Temperature Control Module

The "RYC-TAR" Air Flow Temperature Control module has been designed to study a practical control system, through the control of an air flow temperature.The "RYC-TAR" module consists of two main components: the "RYC-TAR" apparatus and the "RYC-TAR"...

RYC-TE

Available

6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-TE

Temperature Control Module

The "RYC-TE" Temperature Control module has been designed to study a practical control system, through the control of the water temperature in a tank.The "RYC-TE" module consists of two main components: the "RYC-TE" apparatus and the "RYC-TE"...

BASIC TEACHING UNIT FOR THE STUDY OF REGULATION AND CONTROL - RYC/B

RYC/B

Available

6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC/B

Basic Teaching Unit for the Study of Regulation and Control

The Basic Teaching Unit for the Study of Regulation and Control, "RYC/B", allows the user to learn the basics about regulation and control of first and second order systems.This unit enables to carry a set of practices related with basic...

TRANSDUCERS AND INSTRUMENTATION UNIT - SAIT

SAIT

Available

6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

SAIT

Transducers and Instrumentation Unit

The SAIT Trainer is designed to show most of the devices used in the industry that allow the electronic systems to communicate with the real world, to measure physical variables and to control industrial processes.It is a trainer with a logical...

PRESSURE SENSORS CALIBRATION SYSTEM - SCSP

SCSP

Available

14.2.2.- INSTRUMENTATION AND CONTROL

SCSP

Pressure Sensors Calibration System

The Pressure Sensors Calibration System, "SCSP", is mainly composed of two pressure manometers on one hand, one measuring up to 1000 millimeters of water or 100 millibars and the other one measuring up to 2.5 bars and on the other hand, two vacuum...

WEIGHING SYSTEM, WITH COMPUTER DATA ACQUISITION - SPC

Available

14.2.2.- INSTRUMENTATION AND CONTROL

SPC

Weighing System, with Computer Data Acquisition

The Weighing System, with Computer Data Acquisition "SPC" consist of a digital force meter that allows to determine both the mass and weight of a body (traction) as well as to determine compression forces.It has different adaptors according to the...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF DIGITAL SIGNAL PROCESSING - TDS

Available

14.2.1.3.- DIGITAL ELECTRONICS

TDS

Computer Controlled Teaching Unit for the Study of Digital Signal Processing

The Teaching Unit for the Study of Digital Signal Processing "TDS" allows to study the principles and more important concepts about digital signal processing, including study and practical exercises, among others, of:Continuous waveforms...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF POWER ELECTRONICS (WITH IGBTS) - TECNEL

TECNEL

Available

6.1.2.2.- POWER ELECTRONICS AND INDUSTRIAL ELECTRONICS

TECNEL

Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS)

The Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS), "TECNEL" is a unit with Computer Control and Data Acquisition System designed to study the basis of Power Electronics. It allows students to study AC/DC, DC/AC,...

COMPUTER CONTROLLED PROCESS CONTROL UNIT FOR THE STUDY OF PRESSURE (AIR) - UCP-P

UCP-P

Available

6.1.1.3.- INDUSTRIAL SYSTEM APPLICATIONS

UCP-P

Computer Controlled Process Control Unit for the Study of Pressure (Air)

The Computer Controlled Process Control Unit for the Study of Pressure (Air), "UCP-P", consists of a compressed air duct whose flow is controlled by a pneumatic valve (the compressed air or gas source is not included). The air is supplied through...

Quality

AFTER-SALES SERVICE

FOR FURTHER INFORMATION, CONTACT US