Cookie preferences
Your selection
There are no more selected items
FOR FURTHER INFORMATION, CONTACT US
- M-KITS
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M-KITS
Basic Electronics and Electricity Assembly Kits:
The purpose of Electronics and Electricity Assembly Kits (M-KITS) is to provide the students with the necessary elements for creating their own circuits.
- LIEBA
Available
14.2.1.6.- POWER ELECTRONICS
LIEBA
Basic Electronics and Electricity Laboratory
We present a flexible and modular-based system for learning basic electronics, basic electricity and circuit theory. The advantage given by this learning and teaching system is that the student establishes his own rhythm, thus rendering...
- LIFLUBA
Available
8.1.7.- HYDRAULIC MACHINES: TURBINES
LIFLUBA
Basic Fluids Mechanics Integrated Laboratory
Hydraulics is the branch of science that deals with the mechanical properties of fluids, and Fluid Mechanics provides the foundation for hydraulics.With LIFLUBA (Basic Fluids Mechanics Integrated Laboratory), EDIBON tries to give answer to the...
- FME00/B
Available
8.1.1.- BASE UNITS
FME00/B
Basic Hydraulic Feed System
The Basic Hydraulic Feed System, "FME00/B", designed by EDIBON is a service unit for different Fluid Mechanics Units as: "FME" type modules, Fluid Friction in Pipes Unit "AFT", etc., increasing the equipment profitability.
- AEL-AD6B
Available
4.1.1.- HOME ELECTRICAL INSTALLATIONS
AEL-AD6B
Basic Luminosity Control Application
The Basic Luminosity Control Application, "AEL-AD6B", has been designed by EDIBON to study how a luminosity control application works. This unit is composed by several modules in order to carry out practices related to switching circuits to...
- LIMEBA
Available
7.1.1.- MECHANICS FUNDAMENTALS KITS
LIMEBA
Basic Mechanics Integrated Laboratory
The Integrated Basic Mechanics Laboratory, "LIMEBA," designed by EDIBON, allows for the construction of various experiments on the base panel, where length measurements are possible thanks to the distance between the centers of the perforations...
- FME23
Available
8.1.8.- HYDRAULIC PIPING SYSTEM
FME23
Basic Pipe Network Unit
The Basic Pipe Network Unit, "FME23", designed by EDIBON, allows the study of pressures and flows created by interconnected pipes, i.e. in a network.The objective of this unit is to simulate the problems that could originate in pipe networks, with...
2.2.- KITS FOR CIRCUITS ASSEMBLY
M13/KIT
Basic Sequential Circuits Kit
Accessory of
M-KITS
With Basic Sequential Circuits Kit, "M13/KIT", designed by EDIBON, all types of bistables, counters, flip-flops, synchronous sequential circuits and the operation of memories can be studied.
- N-M13
Available
14.2.1.3.- DIGITAL ELECTRONICS
N-M13
Basic Sequential Circuits Module
Logic gates and the circuits created with them constitute combinational logic, so called because the output only depends on the combination of the input variables present.There is a second group of logic circuits called sequential logic, so called...
9.7.- HEAT EXCHANGERS
TIVES/SS
Basic Stirred-Tank Heat Exchanger with Double Jacket and Coil
Accessory of
TICC/SS
- MDSU
Available
7.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING
MDSU
Basic Unit of Mechanical Drive Systems
The Basic Unit of Mechanical Drive Systems, "MDSU", consists of a main frame where a series of accessories and elements are arranged, distributed in modules of different level, thought to introduce the user in the field of mechanical systems and...
- UDDB
Available
11.1.4.- DISTILLATION AND CRACKING
UDDB
Batch Distillation Unit
The Batch Distillation Unit, "UDDB", is basically composed by a boiler on which different types of interchangeable columns can be adapted (plate columns and Raschig Rings column). An eight plate column, a reflux system and a tank for the...
11.2.- CHEMICAL REACTORS
QRD
Batch Reactor for QR
Accessory of
QR
The Batch Reactor for QR, "QRD", designed by EDIBON, enables the study and kinetic analysis of homogeneous liquid-liquid reactions, as well as the demonstration of adiabatic and isothermal reactions.This unit offers a wide range of opportunities...
5.2.- MICROGRIDS
PWP-BE
Battery Energy Storage Power Plant
The purpose of this application is to demonstrate the importance of energy storage in isolated environments. There are cases in which due to the absence of wind or photovoltaic energy we have no other option than to resort to the storage of...
- AEL-BESTA
Available
5.5.- ENERGY STORAGE
AEL-BESTA
Battery Energy Storage Test Application
There are different systems to store energy, one of the most usual ways is the rechargeable electric batteries. There are many different types of batteries: lithium-ion, lithium-ion polymer, lead-acid, solid-state, redox flow battery, etc. Every...
- MFV
Available
7.3.2.1.- MECHANICAL TEST
MFV
Beam Deflection Unit
The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...
- MCF
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)
MCF
Belt Friction Unit
The Belt Friction Unit, "MCF", allows us to carry out studies and investigations to compare the driving torque for a given degree of overlap of a flat belt (leather or rope) and a V belt.With this unit the relationship between the tensions in the...
- MCF/A
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)
MCF/A
Belt Friction Unit with Dynamometers
The Belt Friction Unit with Dynamometers, "MCF/A", designed by EDIBON, allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.With this unit it is possible to observe the...
- TTEB
Available
11.1.7.- DRYING AND COOLING
TTEB
Bench Top Cooling Tower
The Bench Top Cooling Tower, "TTEB", includes a pump that impels hot water from the tank (with level switch and heating element) to the manifolds located at the top of the cooling tower. Water flow can be adjusted by a manual needle valve.A...
- FME03
Available
8.1.4.- HYDRODYNAMICS
FME03
Bernoulli's Theorem Demonstration
The Bernoulli's Theorem Demonstration unit, "FME03", designed by EDIBON is mainly composed of a circular section pipe with the shape of a truncated cone, transparent and with seven pressure taps that allows to measure, simultaneously, the static...
- EBDB
Available
5.3.7.- BIOFUELS
EBDB
Biodiesel Process Unit
The process carried out by the Biodiesel Process Unit, "EBDB", consists on transforming the fatty acids contained in vegetable oils into a high energy content biofuel.Basically, the process consists of two well-defined stages:Stage I: Mixing the...
- EBEB
Available
5.3.7.- BIOFUELS
EBEB
Bioethanol Process Unit
The Bioethanol Process Unit (EBEB) has been designed to study and control the bioethanol production process on a laboratory scale. This unit allows to monitor and examine all the important processes, from liquefaction and saccharification of the...
- EBGB
Available
5.3.7.- BIOFUELS
EBGB
Biogas Process Unit
The Biogas Process Unit, "EBGB", is supplied with two packed anaerobic digesters. In this way, the user can work either in only one stage or in two stages, separating the different phases of the digestion process (the processes of hydrolysis,...
5.1.3.1.- POWER GENERATION
PSV-BPP-SOF
Biomass Power Plant Simulator
Accessory of
PSV-PPSS
The operation and structure of biomass plants are based on the Rankine steam cycle, with the characteristic that the fuel burned in the boiler is organic matter called biomass, serving as a type of energy that can be considered renewable. In this...
- EBMB
Available
5.3.7.- BIOFUELS
EBMB
Biomass Process Unit
The main element of the unit is the biomass boiler, which will heat the water that will flow through the other components transferring its heat.The boiler is a biomass boiler of 16 kW that works with pellet and other granulated fuels. The body of...
- BICIR
Available
14.3.- BIOMEDICAL EQUIPMENT
BICIR
Biomedical Electrosurgery Unit
The Unit for Study of Electrosurgery in Biomedicine, "BICIR", consists of an electrosurgical unit used in modern medicine to cut tissues, restrict blood flow and improve the surgeon’s visibility during interventions. The unit includes a protective...
- BIMAG
Available
14.3.- BIOMEDICAL EQUIPMENT
BIMAG
Biomedical Magnetotherapy Unit
The Biomedical Magnetotherapy Teaching Unit, "BIMAG" allows the students to test magnetotherapy, so as to achieve a better knowledge on its functioning and internal mechanism.The Biomedical Magnetotherapy Teaching Unit, "BIMAG" includes:Real model...
- EBL
Available
3.3.- APPLIED COMMUNICATIONS
EBL
Bluetooth Unit
The Bluetooth Unit, "EBL", operates in conjunction with a computer, which is connected with the Bluetooth Dongle, that allows communicating and programming the Bluetooth Devices to perform a simple Bluetooth network.The two Bluetooth Devices...
- TBCF
Available
9.1.- FUNDAMENTALS AND BASIC CONCEPTS OF THERMODYNAMICS
TBCF
Bomb Calorimeter
Bomb Calorimeter, "TBCF", comprises the calorimeter, a calorimeter vessel, an outer double walled water jacket, control unit to switch on/off the stirrer and the ignition device, an accurate thermometer and charging unit with pressure gauges to...
- MBW
Available
7.2.2.- GEARS, DIFFERENTIALS AND TRANSMISSIONS
MBW
Borg-Warner Automatic Transmission
The main distinguishing element of automatic transmissions is its group of epicyclic gearing.The gear assembly of the "MBW" unit consists of:Two sun gears, one to transfer forward gear ratios and one reverse gear.Two sets of planet gears: long and...
- AE-PLC-MEMB
Available
6.2.5.2.- PROCESSING WORKSTATIONS APPLICATIONS
AE-PLC-MEMB
Bottling Workstation
The "AE-PLC-MEMB" is a bottling workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-MEMB" transport the input bottles, to the filling area. In this zone, the "AE-PLC-MEMB" fills...
- EEDB
Available
7.3.2.1.- MECHANICAL TEST
EEDB
Brinell Hardness Testing Unit
The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...
- EBVR
Available
7.3.2.1.- MECHANICAL TEST
EBVR
Brinell, Vickers & Rockwell Hardness Testing Unit
The Brinell, Vickers and Rockwell Hardness Testing Unit, "EBVR", consists of a hardness testing machine that determines the three main types of hardness (Brinell, Vickers and Rockwell). It can be adapted to determine hardness of ferrous materials...