Best sellers
Showing 901-936 of 950 item(s)
12 24 36
UNIT FOR STUDYING EQUILIBRIUM OF MOMENTS ON A TWO ARM LEVER - MEMB2
  • MEMB2
Available
7.1.3.- STATICS AND DYNAMICS
MEMB2
Unit for studying Equilibrium of Moments on a Two Arm Lever
The Unit for studying Equilibrium of Moments on a Two Arm Lever, "MEMB2", has been designed by EDIBON to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme...
View Unit
UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG
  • MFPG
Available
7.1.6.- STRUCTURAL MECHANICS
MFPG
Unit for studying Forces in a Jib Crane
The Unit for studying Forces in a Jib Crane, "MFPG", has been designed by EDIBON to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in...
View Unit
UNIT FOR STUDYING FORCES IN A SIMPLE BAR STRUCTURE - MFBS
  • MFBS
Available
7.1.6.- STRUCTURAL MECHANICS
MFBS
Unit for Studying Forces in a Simple Bar Structure
The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...
View Unit
UNIT FOR STUDYING FORCES IN AN OVERDETERMINATE TRUSS - MFCS2
  • MFCS2
Available
7.1.6.- STRUCTURAL MECHANICS
MFCS2
Unit for studying Forces in an Overdeterminate Truss
The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", designed by EDIBON, allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in...
View Unit
UNIT FOR STUDYING FORCES IN DIFFERENT SINGLE PLANE TRUSSES - MFCS1
  • MFCS1
Available
7.1.6.- STRUCTURAL MECHANICS
MFCS1
Unit for studying Forces in Different Single Plane Trusses
The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", designed by EDIBON, allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the...
View Unit
UNIT FOR STUDYING HOOKE´S LAW - MELH
  • MELH
Available
7.1.3.- STATICS AND DYNAMICS
MELH
Unit for studying Hooke´s Law
The Unit for studying Hooke's Law, "MELH", designed by EDIBON, demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring –...
View Unit
UNIT FOR STUDYING METHODS TO DETERMINE THE ELASTIC LINE - MDLE
  • MDLE
Available
7.1.6.- STRUCTURAL MECHANICS
MDLE
Unit for studying Methods to Determine the Elastic Line
The Unit for studying Methods to Determine the Elastic Line, "MDLE", designed by EDIBON, consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys,...
View Unit
UNIT FOR THE KINEMATIC STUDY OF GEAR TRAINS - KSGT
  • KSGT
Available
7.1.2.2.- GEARS
KSGT
Unit for the Kinematic Study of Gear Trains
The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study.The cogwheels may be assembled on the axles in...
View Unit
UNIT TO STUDY A CONTROL GEAR CUTAWAY MODEL - CGCM
Available
7.4.1.- CUTAWAY MODELS
CGCM
Unit to Study a Control Gear Cutaway Model
Accessory of CMTM
The Unit to Study a Control Gear Cutaway Model, "CGCM ", provides an in-depth analysis of these gears, which are designed to adjust the spacing between teeth, ensuring precise control in various mechanical applications.These gears are essential in...
View Unit
UNIT TO STUDY A MITRE GEAR CUTAWAY MODEL - MGCM
Available
7.4.1.- CUTAWAY MODELS
MGCM
Unit to Study a Mitre Gear Cutaway Model
Accessory of CMTM
The Unit to Study a Mitre Gear Cutaway Model, "MGCM", designed by EDIBON, allows for the study of this type of transmission, which uses bevel gears to transmit motion between two perpendicular shafts.Due to their ability to change the direction of...
View Unit
UNIT TO STUDY A MULTIPLE-DISC CLUTCH CUTAWAY MODEL - DCCM
Available
7.4.1.- CUTAWAY MODELS
DCCM
Unit to Study a Multiple-Disc Clutch Cutaway Model
Accessory of CMTM
The Unit to Study a Multiple-Disc Clutch Cutaway Model, "DCCM", designed by EDIBON, allows for the study of this Multiple-disk clutch system, used to transmit higher torques in mechanical systems.This type of clutch is widely used in chain tractor...
View Unit
UNIT TO STUDY A PLANETARY GEAR CUTAWAY MODEL - PGCM
Available
7.4.1.- CUTAWAY MODELS
PGCM
Unit to Study a Planetary Gear Cutaway Model
Accessory of CMTM
The Unit to Study a Planetary Gear Cutaway Model, "PGCM", designed by EDIBON, allows for the study of one or more external or planet gears that revolves about a central or sun gear.Planetary gears are widely used in vehicle gearboxes, speed...
View Unit
UNIT TO STUDY A SHAFT WITH JOURNAL BEARINGS ASSEMBLY - SJBA
  • SJBA
Available
7.4.2.- DETACHABLE MODELS
SJBA
Unit to Study a Shaft with Journal Bearings Assembly
The Unit to Study a Shaft with Journal Bearings Assembly, "SJBA", designed by EDIBON, unit consists of two shaft bearings at the ends and a ground steel shaft. The slide bearing consists of two parts, the bearing itself, which is the part of the...
View Unit
UNIT TO STUDY A SPUR GEAR CUTAWAY MODEL - SGCM
Available
7.4.1.- CUTAWAY MODELS
SGCM
Unit to Study a Spur Gear Cutaway Model
Accessory of CMTM
The Unit to Study a Spur Gear Cutaway Model, "SGCM, designed by EDIBON, It is a mitre gear.l power transmission systems.It is made up of bevel gears that consist of two conical cogwheels. This device is used to transmit motion between two...
View Unit
UNIT TO STUDY A TWO-STAGE SPUR GEAR CUTAWAY MODEL - SGCM/2
Available
7.4.1.- CUTAWAY MODELS
SGCM/2
Unit to Study a Two-Stage Spur Gear Cutaway Model
Accessory of CMTM
The Sectioned Model of a Spur Gear Transmission, "SGCM/2", designed by EDIBON, allows for the study of this type of transmission, which is the simplest and most widely used in mechanical systems for motion and power transmission.These systems are...
View Unit
UNIT TO STUDY A WORM GEAR CUTAWAY MODEL - WGCM
Available
7.4.1.- CUTAWAY MODELS
WGCM
Unit to Study a Worm Gear Cutaway Model
Accessory of CMTM
The Unit to Study a Worm Gear Cutaway Model, "WGCM", designed by EDIBON, allows for the study of a helical worm screw and a circular cogwheel.This type of transmission is widely used in automatic doors, elevators, and mechanisms that require...
View Unit
UNIT TO STUDY ROTATIONAL INERTIA - SRI
  • SRI
Available
7.1.3.- STATICS AND DYNAMICS
SRI
Unit to Study Rotational Inertia
The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...
View Unit
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- MECHANICAL TEST
MUP
Universal Buckling Unit
The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
View Unit
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- MECHANICAL TEST
EEU/20KN
Universal Material Testing Unit
The Universal Material Testing Unit, "EEU/20KN", designed by EDIBON, is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20...
View Unit
UNSYMMETRICAL CANTILEVER UNIT - MVV
  • MVV
Available
7.1.6.- STRUCTURAL MECHANICS
MVV
Unsymmetrical Cantilever Unit
The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...
View Unit
VENTURI, BERNOULLI AND CAVITATION UNIT - FME22
  • FME22
Available
8.1.4.- HYDRODYNAMICS
FME22
Venturi, Bernoulli and Cavitation Unit
The Venturi, Bernoulli and Cavitation Unit, "FME22", has been designed by EDIBON to demonstrate some of the practical possibilities that can be achieved with a Venturi tube.This unit is designed for demonstrating some practical possibilities with...
View Unit
VIBRATIONS AND/OR DEFORMATIONS TEST MODULE - BS1
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BS1
Vibrations and/or Deformations Test Module
Accessory of BS
Vibrations and/or Deformations Test Module, "BS1", has been designed by EDIBON to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is...
View Unit
VORTEX FLOW METER - FME30/I
  • FME30/I
Available
8.1.2.- MEASUREMENT
FME30/I
Vortex Flow Meter
The Vortex Flowmeter, "FME30/I", designed by EDIBON, allows to perform different studies and experiments of various volumetric and mass flow measurement methods, as well as the comparison of continuous and discontinuous methods.This unit includes...
View Unit
WATER HAMMER - FME15
  • FME15
Available
8.1.8.- HYDRAULIC PIPING SYSTEM
FME15
Water Hammer
With the Water Hammer unit, "FME15", designed by EDIBON, we can demonstrate the effects of the instantaneous or gradual variation of the velocity of a fluid.The water hammer phenomenon, which appears as a consequence of a rapid change in the...
View Unit
WATER HEATERS TRAINING UNIT - WHT
  • WHT
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
WHT
Water Heaters Training Unit
The Water Heater Training Unit, "WHT", designed by EDIBON, allows demonstrating the operation of three types of water heaters.The unit has three heaters, two of them commercial one with electronic ignition and one in millivolt, and a residential...
View Unit
WHEEL AND DIFFERENTIAL AXLE UNIT - MRYE2
  • MRYE2
Available
7.1.3.- STATICS AND DYNAMICS
MRYE2
Wheel and Differential Axle Unit
The Wheel and Differential Axle Unit, "MRYE2", has been designed by EDIBON to investigate the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...
View Unit
WHIRLING OF SHAFTS UNIT - MEER
  • MEER
Available
7.1.4.- VIBRATIONS AND OSCILLATIONS
MEER
Whirling of Shafts Unit
The Whirling of Shafts Unit, "MEER", has been designed by EDIBON for the experimental study of rotor dynamics and the vibration phenomena associated with rotating flexible shafts. The unit allows the analysis of critical speeds, resonance...
View Unit
WHITWORTH QUICK RETURN MECHANISM - MBM2
  • MBM2
Available
7.1.2.1.- MECHANISMS
MBM2
Whitworth Quick Return Mechanism
The Whitworth Quick Return Mechanism, "MBM2", is a mechanism able to transform circular movement into reciprocating movement. It ismade of aluminum and consists of a rotary element, called crank, with a graduated disk, connected to a rigid bar,...
View Unit
WIND ENERGY BASIC UNIT - MINI-EEE
  • MINI-EEE
Available
5.3.3.- WIND ENERGY
MINI-EEE
Wind Energy Basic Unit
The Wind Energy Basic Unit, "MINI-EEE", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up to six blades and a...
View Unit
WIND ENERGY DRIVE TRAIN ANALYSIS UNIT - WEDTA
  • WEDTA
Available
5.3.3.- WIND ENERGY
WEDTA
Wind Energy Drive Train Analysis Unit
The Wind Energy Drive Train Analysis Unit, "WEDTA", designed by EDIBON, allows students and professors to explore the operational characteristics of a wind turbine rotor under various wind conditions, thus optimizing the design and operation of...
View Unit
WIND ENERGY POWER PLANT - PWP-WE
Available
5.2.- MICROGRIDS
PWP-WE
Wind Energy Power Plant
Accessory of AEL-MGP
The Wind Power Plant, "PWP-WE", designed by EDIBON, allows the study of wind power plants within the context of microgrids.It consists of an induction turbine-generator group whose purpose is to provide energy to the micro grid by making an...
View Unit
WIND ENERGY UNIT - EEE
  • EEE
Available
5.3.3.- WIND ENERGY
EEE
Wind Energy Unit
The Wind Energy Unit, "EEE", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The unit consists of a...
View Unit
Ask for information