Best sales

Best sellers

Showing 757-792 of 921 item(s)

RECIRCULATING AIR CONDITIONING UNIT - TARB

TARB

Available

9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

TARB

Recirculating Air Conditioning Unit

The Recirculating Air Conditioning Unit, "TARB", has been designed to study both the changes in the air conditions and the refrigeration circuit. For that purpose, temperature sensors, pressure meters and flow meters have been strategically...

REFRIGERATION CYCLE DEMONSTRATION UNIT - TCRB

TCRB

Available

9.4.- REFRIGERATION

TCRB

Refrigeration Cycle Demonstration Unit

The vapour compression refrigeration and heat pump cycle is very important in food and drug preservation, air conditioning and heat pumps, as well as other industrial and commercial process.The Refrigeration Cycle Demonstration Unit, "TCRB",...

REFRIGERATION OR HEATING WATER RECIRCULATION ADVANCED UNIT - TERA/A

TERA/A

Available

SERVICES MODULES

TERA/A

Refrigeration or Heating Water Recirculation Advanced Unit

The Refrigeration or Heating Water Recirculation Advanced Unit, "TERA/A", is a reversible heat pump, which allows heating and cooling a volume of water for the study of heat transfer and temperature regulation of a fluid. Using a constant flow of...

REFRIGERATION OR HEATING WATER RECIRCULATION UNIT - TERA

TERA

Available

SERVICES MODULES

TERA

Refrigeration or Heating Water Recirculation Unit

The Refrigeration Water Recirculation Unit, "TERA", is a reversible heat pump that allows the heating and cooling of a volume of water.It is a recirculation heat pump designed to provide a continuous supply of water cooled or heated at the...

RERVERSIBLE HEAT PUMP + AIR CONDITIONING + REFRIGERATION WITH 2 CONDENSERS AND 2 EVAPORATORS (WATER/AIR) - THIBAR22B

THIBAR22B

Available

9.3.- HEAT PUMPS

THIBAR22B

Rerversible Heat Pump + Air Conditioning + Refrigeration with 2 Condensers and 2 Evaporators (Water/Air)

The unit "THIBAR22B" has as aim introduce the student to the study of the heat pumps, air conditioning and refrigeration, as well as the analysis and determination of the operation typical parameters of the unit depending on the two types of...

Available

2.3.5.- INSTRUMENTATION & CONTROL

M41

Resistance Transducers

This unit allows different practices related to resistance transducers to be carried out. The unit has five different types of transducers: PTC, NTC, LDR, strain gauge and RTD.The operation of thermistors is based on the principle that the...

EPAB

Available

11.1.2.- EVAPORATION

EPAB

Rising Film Evaporator

The objective of evaporation is to concentrate a non-volatile solute, carrying out the elimination of a volatile compound. Water is the volatile compound used in most evaporations.Basically, the unit consists of the following circuits:The feed...

Available

13.1.- HYDROLOGY AND HYDROGEOLOGY

RFS

River Flow Simulator

The River Flow Simulator, "RFS", designed by EDIBON, allows the simulation and study of the river features, included the flow and solid bed load motion.The main element is a rectangular tank made of stainless steel supported on a metal beam frame,...

AE-BR

Available

6.2.5.5.- ROBOTIC WORKSTATIONS APPLICATIONS

AE-BR

Robotic Arm Workstation

The "AE-BR" is a robotic arm workstation with the programming console included. The robotic arm can command the pneumatic gripper or the electrical driller installed in it.The "AE-BR" workstation is able to perform a lot of functions including:...

Accessory of MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-4

Rolling Friction in Wheels

Accessory of MEMT

This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...

N-EM-CL

Available

6.2.2.1.- MANUFACTURING SYSTEMS

N-EM-CL

Rolling Mill Control

The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...

FME36

Available

8.1.2.- MEASUREMENT

FME36

Rotameter

The Rotameter, "FME36", designed by EDIBON, is a device developed for the study of flow measurement in fluid systems. This unit allows students to analyze the operating principle of variable area flowmeters with a float, which are widely used in...

ROTATIONAL SPEED & POSITION CONTROL - M47

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M47

Rotational Speed & Position Control

The unit is equipped with a DC motor whose rotation speed can be controlled by the supply voltage. The following sensors are arranged along the motor shaft: optical slot sensor, inductive sensor, infrared reflection sensor, Hall effect sensor,...

Available

7.1.2.1.- MECHANISMS

MYE

Scotch Yoke Mechanism

The Scotch Yoke Mechanism, "MYE", designed by EDIBON, is an example of slider-crank mechanism for converting the linear motion of a slider into rotational motion or vice versa.It is made of aluminum and consists of a rotary element, called crank,...

MSCT

Available

7.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING

MSCT

Screw Joint Testing Unit

The Screw Joint Testing Unit, "MSCT", represents the simulation of a tightening set consisting of a screw and a nut on two rectangular shaped beams.A very precise torque wrench performs the tightening through a threaded rod and a flywheel. The...

SEDIMENT TRANSPORT DEMONSTRATION CHANNEL - CAS

Available

13.1.- HYDROLOGY AND HYDROGEOLOGY

CAS

Sediment Transport Demonstration Channel

The Sediment Transport Demonstration Channel, "CAS", designed by EDIBON, consist of an inclinable channel mounted on a base plate, supported by two supports, with a discharge tank and recirculating pump. This tank is in the Basic Hydraulic Feed...

ESED

Available

11.1.11.- FILTRATION, SEDIMENTATION AND MIXING

ESED

Sedimentation Study Unit

The Sedimentation Study Unit, "ESED", designed by EDIBON, allows studying and compare the sedimentation processes of several suspensions simultaneously.It is formed by five sedimentation methacrylate cylinders mounted vertically on a panel,...

Available

11.1.11.- FILTRATION, SEDIMENTATION AND MIXING

PDS

Sedimentation Tank

The Sedimentation Tank, "PDS", is a teaching unit, designed by EDIBON, to demonstrate the sedimentation process and to familiarize with the settling principle of discrete particles settling into a tank. It will also allow to study the hydraulic...

SEDIMENTATION, PRECIPITATION AND FLOCCULATION UNIT - SPFB

SPFB

Available

13.3.- WASTEWATER TREATMENT

SPFB

Sedimentation, Precipitation and Flocculation Unit

The Sedimentation, Precipitation and Flocculation Unit, "SPFB", has been designed by EDIBON to study the parameters that affect the physicochemical treatment of wastewater for purification. The objective of the unit is to reduce colloidal and...

Accessory of M-KITS

Available

2.2.- KITS FOR CIRCUITS ASSEMBLY

M3/KIT

Semiconductors I Kit

Accessory of M-KITS

With Semiconductors I Kit, "M3/KIT", designed by EDIBON, the basic concepts of diodes can be studied, at the same time as the student will be asked to carry out a series of assemblies on the practice board to consolidate his knowledge of PN-type...

N-M3

Available

14.2.1.4.- SEMICONDUCTORS

N-M3

Semiconductors I Module

Semiconductors are materials characterized by a resistivity lower than an insulator and higher than a conductor. There are different types of semiconductors, among which we could highlight diodes as extrinsic semiconductors (formed by more than...

Accessory of M-KITS

Available

2.2.- KITS FOR CIRCUITS ASSEMBLY

M4/KIT

Semiconductors II Kit

Accessory of M-KITS

With Semiconductors II Kit, "M4/KIT", designed by EDIBON, semiconductors can be studied by extending the knowledge acquired in the basic module "M3/KIT".

N-M4

Available

14.2.1.4.- SEMICONDUCTORS

N-M4

Semiconductors II Module

To improve and extend the characteristics of the input signals, it is possible to use two or more transistors. Thus, you may want to build an amplifier in which you want to increase the input impedance without decreasing the gain. The solution to...

FME12

Available

8.1.6.- HYDRAULIC MACHINES: PUMPS

FME12

Series/Parallel Pumps

The Series/Parallel Pumps unit, "FME12", designed by EDIBON, allows the study of the coupling between two series/parallel centrifugal pumps, obtaining the characteristic curves as well as the calculation of the water flow rate.The unit consists of...

PBSPB

Available

8.7.1.- PUMPS

PBSPB

Series/Parallel Pumps Bench

The Series/Parallel Pumps Bench, "PBSPB", is designed to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed water tank, circulation pipes,...

SERVOMOTOR INDUSTRIAL APPLICATION - AE-SMI

AE-SMI

Available

2.4.2.- ELECTRICAL SERVOMOTORS

AE-SMI

Servomotor Industrial Application

The Servomotor Industrial Application, "AE-SMI", is designed to perform up to seven controls used in motion technology: position control,speed control, torque control, position and speed control, speed and torque control and the full-closed...

SERVOSYSTEMS BASIC UNIT FOR DC MOTORS - SERIN/CCB

SERIN/CCB

Available

6.1.2.2.- POWER ELECTRONICS AND INDUSTRIAL ELECTRONICS

SERIN/CCB

Servosystems Basic Unit for DC Motors

The Servosystems Basic Unit for DC Motors, "SERIN/CCB", is an unit whose goal is studying low power servo systems. It is a low power DC motor speed control trainer that has a breakdown simulator.This unit is a basic version of the Computer...

SET TO STUDY CAVITATION IN PUMPS - MDU-SSCP

Accessory of MDU

Available

7.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING

MDU-SSCP

Set to Study Cavitation in Pumps

Accessory of MDU

Pump cavitation is produced when steam cavities are created within a fluid in which forces act responding to the pressure differences.Cavitation causes noise, damage to components and loss of performance.The Set to Study Cavitation in Pumps,...

TSID

Available

9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING

TSID

Sewerage Unit

With the Sewerage Unit, "TSID", tests about a wastewater sanitation system can be made and the flow in a sewage system can be observed.A complete sewage system can be observed with the "TSID" unit. The collection of wastewater from a series of...

SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF

Available

7.3.2.1.- MECHANICAL TEST

MMF

Shear Force and Bending Momentum Unit

The Shear Force and Bending Momentum Unit, "MMF", designed by EDIBON, is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the...

SHELL & TUBE HEAT EXCHANGER FOR TICB - TICTB

Accessory of TICB

Available

9.7.- HEAT EXCHANGERS

TICTB

Shell & Tube Heat Exchanger for TICB

Accessory of TICB

The Shell and Tube Heat Exchanger for TICB, "TICTB", designed by EDIBON, provides a comprehensive environment for the study of heat transfer. It allows analysis of the overall energy balance, heat losses in parallel and counterflow configurations,...

SHELL & TUBE HEAT EXCHANGER FOR TICC - TICT

Accessory of TICC

Available

9.7.- HEAT EXCHANGERS

TICT

Shell & Tube Heat Exchanger for TICC

Accessory of TICC

The Shell and Tube Heat Exchanger for TICC, "TICT", designed by EDIBON, provides a comprehensive environment for the study of heat transfer. It allows analysis of the overall energy balance, heat losses in parallel and counterflow configurations,...

AE-PLC-SIE

Available

6.2.1.- PLC OPTIONS

AE-PLC-SIE

SIEMENS PLC Application

The SIEMENS PLC Application, "AE-PLC-SIE", is a PLC unit designed by EDIBON which use one of the last SIEMENS PLC units. It allows the user to learn about PLC logic programming, different PLC programming languages, PLC to PC communication, etc.The...

FOR FURTHER INFORMATION, CONTACT US