Best sales

Best sellers

Showing 361-396 of 938 item(s)

COMPUTER CONTROLLED TWO-SHAFT GAS TURBINE/ JET ENGINE - TGDEPC

TGDEPC

Available

5.4.- CONVENTIONAL ENERGIES

TGDEPC

Computer Controlled Two-Shaft Gas Turbine/ Jet Engine

The main element of the Computer Controlled Two-Shaft Gas Turbine/ Jet Engine, "TGDEPC", is the High Pressure Turbine, which is also called Gas Generative Turbine. It consists of:Radial compressor, which is feeded by atmospheric air to compress...

COMPUTER CONTROLLED TWO-STAGE COMPRESSION REFRIGERATION UNIT - TSCC

TSCC

Available

9.4.- REFRIGERATION

TSCC

Computer Controlled Two-Stage Compression Refrigeration Unit

The Computer Controlled Two-Stage Compression Refrigeration Unit, "TSCC", is clearly organized and represents a two-stage compression refrigeration system to obtain low temperatures.The main components of the unit are:Two hermetic compressors in...

COMPUTER CONTROLLED TWO-STAGE COMPRESSOR TEST UNIT - HCDEC

HCDEC

Available

8.7.5.- COMPRESSORS

HCDEC

Computer Controlled Two-Stage Compressor Test Unit

The Computer Controlled Two-Stage Compressor Test Unit, "HCDEC", works with compressed air and presents as a principal device a compression bench with two pistons, low and high pressure.This unit presents four circuits or work dispositions which...

COMPUTER CONTROLLED UNIT FOR TRANSIENT DRAINAGE PROCESSES IN STORAGE RESERVOIRS - PDDRC

PDDRC

Available

8.9.3.- INSTALLATIONS AND MAINTENANCE

PDDRC

Computer Controlled Unit for Transient Drainage Processes in Storage Reservoirs

The Computer Controlled Unit for Transient Drainage Processes in Storage Reservoirs, "PDDRC", designed by EDIBON, allows to investigate transient drainage processes in storage reservoirs, to simulate a rainwater retention basin and to study the...

COMPUTER CONTROLLED UNIT TO STUDY FLOW THROUGH PACKED COLUMNS - FPCC

FPCC

Available

11.1.8.- ABSORPTION AND ADSORPTION

FPCC

Computer Controlled Unit to Study Flow through Packed Columns

The Computer Controlled Unit to Study Flow through Packed Columns, "FPCC", designed by EDIBON, unit is a transparent packed column, which can be used with water, air or both fluids, simulating an absorption column.When working with water, the unit...

COMPUTER CONTROLLED UNIT TO STUDY THE EFFICIENCY OF A HEATING SYSTEM - TEHSC

TEHSC

Available

9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

TEHSC

Computer Controlled Unit to Study the Efficiency of a Heating System

The Computer Controlled Unit to Study the Efficiency of a Heating System, "TEHSC",designed by EDIBON allows for studying and analyzing a closed heating system made upof pipes with different diameter and fittings normally used in real heating...

COMPUTER CONTROLLED UNIT TO STUDY WATER FLOW PRINCIPLES - WFPC

WFPC

Available

8.4.- FLOW VISUALIZATION

WFPC

Computer Controlled Unit to Study Water Flow Principles

The Computer Controlled Unit to Study Water Flow Principles, "WFPC", is composed by both a closed and an open water circuit, thus allowing the observation of fluid's behavior in each of them. The selection of the circuit can be made by means of a...

COMPUTER CONTROLLED VAPOUR-COMPRESSION REFRIGERATION UNIT - TRCVC

TRCVC

Available

9.4.- REFRIGERATION

TRCVC

Computer Controlled Vapour-Compression Refrigeration Unit

The Computer Controlled Vapour-Compression Refrigeration Unit, "TRCVC", allows the understanding of the vapor-compression refrigeration process by changing the operation of the different parts of the process, and to study the response of the...

COMPUTER CONTROLLED VERTICAL THREE-PHASE SEPARATOR - VTSC

VTSC

Available

11.1.11.- FILTRATION, SEDIMENTATION AND MIXING

VTSC

Computer Controlled Vertical Three-phase Separator

The Computer Controlled Vertical Three-phase Separator, "VTSC", designed by EDIBON, is a unit that allows the study of the main characteristics of gravity separation and the effect of viscosity, flow and density difference in this separation.Two...

COMPUTER CONTROLLED VOLTAGE CONTROL WITH SVCS IN TRANSMISSION SYSTEMS APPLICATION - AEL-SVC

AEL-SVC

Available

5.1.3.2.- POWER TRANSMISSION

AEL-SVC

Computer Controlled Voltage Control with SVCs in Transmission Systems Application

The Computer Controlled Voltage Control with SVCs in Transmission Systems Application, "AEL-SVC", has been designed by EDIBON to study the most important applications based on thyristor controlled reactor (TCR) and thyristor switched capacitor...

COMPUTER CONTROLLED WATER HAMMER UNIT - EGAC

EGAC

Available

8.8.- FLUID PIPING SYSTEM

EGAC

Computer Controlled Water Hammer Unit

The Computer Controlled Water Hammer Unit, "EGAC", is designed to demonstrate the effects of an instantaneous variation of the speed of a fluid. It is possible to study the water hammer, which is the consequence of a quick change in a fluid speed....

COMPUTER CONTROLLED WATER QUALITY CONTROL UNIT - PCCAC

PCCAC

Available

13.3.- WASTEWATER TREATMENT

PCCAC

Computer Controlled Water Quality Control Unit

The Computer Controlled Water Quality Control Unit, "PCCAC", has been designed to use a pump to transfer water from a feed tank to a first transparent tank equipped with an agitator and conductivity sensor. In this tank, conductivity is regulated...

COMPUTER CONTROLLED WATER TREATMENT PLANT (FILTRATION AND ION EXCHANGE) - PPTAC/2

PPTAC/2

Available

13.3.- WASTEWATER TREATMENT

PPTAC/2

Computer Controlled Water Treatment Plant (filtration and ion exchange)

The Computer Controlled Water Treatment Plant 2, "PPTAC/2", allows to study the main principle of the basic operations in the water treatment.These operations are: depth filtration and ion exchange.The general objective of the exercises is to...

COMPUTER CONTROLLED WATER TREATMENT PLANT (FILTRATION, ADSORPTION, AND ION EXCHANGE) - PPTAC/1

PPTAC/1

Available

13.3.- WASTEWATER TREATMENT

PPTAC/1

Computer Controlled Water Treatment Plant (filtration, adsorption, and ion exchange)

The Computer Controlled Water Treatment Plant 1, "PPTAC/1", designed by EDIBON, allows to study the main principle of the critical operations in the water treatment.These operations are: depth filtration, adsorption and ion exchange.The general...

COMPUTER CONTROLLED WATER-TO-AIR HEAT EXCHANGER UNIT - TIAAC

TIAAC

Available

9.7.- HEAT EXCHANGERS

TIAAC

Computer Controlled Water-to-Air Heat Exchanger Unit

The Computer Controlled Water-to-Air Heat Exchanger Unit, "TIAAC", includes a stainless steel duct with a heat exchanger in its center and a centrifugal fan at one end. The fan impels the air through the heat exchanger. The heat exchanger...

COMPUTER CONTROLLED WAVES ENERGY UNIT - EOMC

EOMC

Available

5.3.4.- MARINE ENERGY

EOMC

Computer Controlled Waves Energy Unit

The Computer Controlled Waves Energy Unit, "EOMC", has been designed by EDIBON to study the wave energy and the influence of several variables. The unit consists of a Base Service Unit and Waves Generator "EOMC-UB" and several modules to be used...

COMPUTER CONTROLLED WETTED WALL GAS ABSORPTION COLUMN - CAPC

CAPC

Available

11.1.8.- ABSORPTION AND ADSORPTION

CAPC

Computer Controlled Wetted Wall Gas Absorption Column

The studied absorption process corresponds to the oxygen-deoxygenated water system, where the oxygen comes from the air and the deoxygenated air is obtained through a desorption column, where a water current comes into contact with a nitrogen...

COMPUTER CONTROLLED WIND ENERGY BASIC UNIT - MINI-EEEC

MINI-EEEC

Available

5.3.3.- WIND ENERGY

MINI-EEEC

Computer Controlled Wind Energy Basic Unit

The Computer Controlled Wind Energy Basic Unit, "MINI-EEEC", has been designed by EDIBON to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up to...

COMPUTER CONTROLLED WIND ENERGY UNIT - EEEC

EEEC

Available

5.3.3.- WIND ENERGY

EEEC

Computer Controlled Wind Energy Unit

The Computer Controlled Wind Energy Unit, "EEEC", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The...

COMPUTER CONTROLLED WIND POWER PLANTS APPLICATION WITH INDUCTION GENERATOR - AEL-WPPIC

AEL-WPPIC

Available

5.3.3.- WIND ENERGY

AEL-WPPIC

Computer Controlled Wind Power Plants Application with Induction Generator

The Computer Controlled Wind Power Plants Application with Induction Generator, "AEL-WPPIC", has been designed by EDIBON to study of the main characteristics and behavior of the induction generators used in wind turbines which inject the generated...

COMPUTER CONTROLLED WIND POWER PLANTS WITH DOUBLE FEED INDUCTION GENERATOR APPLICATION - AEL-WPP

AEL-WPP

Available

5.3.3.- WIND ENERGY

AEL-WPP

Computer Controlled Wind Power Plants with Double Feed Induction Generator Application

The Wind Power Plants with Double Feed Induction Generator Application, "AEL-WPP", is used to investigate the design and operation of modern wind power stations. The "AEL-WPP" consists of a prime motor that moves a double-feed induction generator...

CONCENTRIC TUBE HEAT EXCHANGER FOR TICB - TITCB

Accessory of TICB

Available

9.7.- HEAT EXCHANGERS

TITCB

Concentric Tube Heat Exchanger for TICB

Accessory of TICB

The Concentric Tube Heat Exchanger for TICB, "TITCB", designed by EDIBON, allows for the study of heat transfer between two fluids: the hot water flowing through the inner tube and the cold water flowing through the annular zone between the inner...

CONCENTRIC TUBE HEAT EXCHANGER FOR TICC - TITC

Accessory of TICC

Available

9.7.- HEAT EXCHANGERS

TITC

Concentric Tube Heat Exchanger for TICC

Accessory of TICC

The Concentric Tube Heat Exchanger for TICC, "TITC", designed by EDIBON, allows for the study of heat transfer between two fluids: the hot water flowing through the inner tube and the cold water flowing through the annular zone between the inner...

CONTINUOUS AND BATCH FILTRATION UNIT - TFUB

TFUB

Available

11.1.11.- FILTRATION, SEDIMENTATION AND MIXING

TFUB

Continuous and Batch Filtration Unit

The Continuous and Batch Filtration Unit, "TFUB", has been designed to study the filtration process with two different types of filters. On one hand, there is a vertical plate filter consisting of nylon plates with a diameter of 5 microns, used to...

UDCB

Available

11.1.4.- DISTILLATION AND CRACKING

UDCB

Continuous Distillation Unit

The Continuous Distillation Unit, "UDCB", is formed by a boiler, on which different types of columns can be adapted (plate columns and Raschig columns). An eight plate column, a reflux system, a tank for distillation, a vacuum pump and a feeding...

CONTROL AND DATA ACQUISITION SYSTEM SOFTWARE FOR ELECTRICAL MACHINES - EM-SCADA

EM-SCADA

Available

4.3.2.2.- DC ELECTRICAL MOTORS AND GENERATORS

EM-SCADA

Control and Data Acquisition System Software for Electrical Machines

The Control and Data Acquisition System Software for Electrical Machines, "EM-SCADA", has been designed by EDIBON to study and analyze the performance of rotating and static electrical machines such as three-phase and single-phase AC motors,...

Accessory of TSTCC

Available

9.6.- HEAT TRANSFER

TSTCC/CIB

Control Interface for TSTCC (Common for all available modules type "TXC")

Accessory of TSTCC

CONVENTIONAL ENERGY POWER PLANT - PWP-CE

Accessory of AEL-MGP

Available

5.2.- MICROGRIDS

PWP-CE

Conventional Energy Power Plant

Accessory of AEL-MGP

The Conventional Energy Power Plant, "PWP-CE", designed by EDIBON, is required to operate with any other power plant offered in this catalog. Its purpose, just like in a real microgrid, is to establish the foundation of the electrical microgrid...

CORIOLIS FORCE DEMONSTRATION UNIT - MDFC

MDFC

Available

7.1.3.- STATICS AND DYNAMICS

MDFC

Coriolis Force Demonstration Unit

The Coriolis Force Demonstration Unit, "MDFC", designed by EDIBON, is used to observe the deflection of a jet of water generated by a pump attached to a rotating arm that rotates to different speeds in a horizontal plane. An electronically...

Available

11.1.9.- ION EXCHANGE AND CORROSION

EEC

Corrosion Study Unit

The Corrosion Study Unit, "EEC", designed by EDIBON, allows the corrosion simultaneous study up to eight corrosion cells.Each sample for the test is put in such away that unwanted secondary effects are eliminated.The cells included a cover to...

Available

7.1.2.1.- MECHANISMS

MAC

Coupling Mechanism

The Coupling Mechanism, "MAC", represents a simple Oldham type coupling. The lateral displacement of the input and output shafts may be varied and circular scales are fitted to the input and output flanges.It consists of two outer discs made of...

Available

7.1.2.1.- MECHANISMS

MBI

Crank Mechanism

The Crank Mechanism "MBI", is a unit designed to observe, study and record the motion of a crank and the forces involved in a simple engine mechanism. The piston is linearly displaced through a cylinder with the aid of a guide.Bearings are coupled...

EEFCR

Available

7.3.2.1.- MECHANICAL TEST

EEFCR

Creep Testing Unit

The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...

CROSS FLOW HEAT EXCHANGER FOR TICC - TICF

Accessory of TICC

Available

9.7.- HEAT EXCHANGERS

TICF

Cross Flow Heat Exchanger for TICC

Accessory of TICC

The Cross-Flow Heat Exchanger for TICC, "TICF", designed by EDIBON, provides an effective thermal research tool by enabling the study of heat transfer between two fluids in a cross-flow configuration. In this system, a stream of hot water from the...

QUCB

Available

11.1.10.- CRYSTALLIZATION AND PYROLYSIS

QUCB

Crystallization Unit

The Crystallization Unit, "QUCB", designed by EDIBON, is a unit for the study of the cooling crystallization process. EDIBON has developed this unit to study the crystallization reaction of those constituents whose solubility changes with the...

FOR FURTHER INFORMATION, CONTACT US