14.- GÉNIE BIOMÉDICAL

La Génie Biomédical étudie la mise en œuvre des connaissances en ingénierie dans le domaine de la biologie et de la médecine. La combinaison de instrumentation et de systèmes de contrôle électronique et l'application d'algorithmes mathématiques et de principes physiques et chimiques permettent à Génie biomédical d'étudier et de développer de nouvelles techniques et de nouveaux dispositifs pour la résolution de problèmes cliniques. Cette discipline va de la conception d'éléments de diagnostic et de logiciels médicaux aux outils d'analyse physiologique pour l'étude du cœur ou du système de rendez-vous .

Voir plus

La Génie Biomédical a évolué au fil des ans grâce aux progrès scientifiques et technologiques. Actuellement, des dispositifs tels que les systèmes de surveillance des signes vitaux ou les dispositifs de diagnostic facilitent le travail de soins médicaux. Le développement de méthodes d'analyse d'images telles que rayons X, ultrasons et résonance magnétique permettent d'étudier l'organisme humain de manière claire et rapide. En outre, les logiciels de gestion hospitalière télémédecine et hôpital sont utilisés.

Le futur du génie biomédical a encore un long chemin à parcourir, car la société actuelle exige des solutions médicales rapides et efficaces. Les appareils électroniques utilisés au quotidien permettront de suivre les valeurs des signes vitaux du patient à distance, de pouvoir analyser les symptômes avant un problème de santé et, même, de prévenir ce problème éventuel. Une autre tendance du génie biomédical est la simplification des outils de laboratoire. Des systèmes, tels que Lab On a Chip (LOC), intègrent les fonctions de laboratoire dans une seule puce. De nouvelles techniques robotiquechirurgie, de nouveaux matériaux organiques pour la fabrication de tissus artificiels et de tissus régénératifs ou l'impression en 3D d'organes artificiels permettront de répondre aux besoins médicaux futurs.

Voir les produits
Matériels Associés
SOUS-CATÉGORIES DE GÉNIE BIOMÉDICAL

14.1.- BIOMECANIQUE

Biomécanique étudie la mécanique du mouvement de l'organisme des êtres vivants, parmi lesquels le mouvement du corps humain humain. Cette étude va des mouvements les plus simples de la vie quotidienne, comme le travail ou l'activité sportive, au mouvement de certains organes internes, comme le...
Voir

14.2.- ÉLECTRONIQUE BIOMÉDICAL

Biomedical Engineering étudie l'application des connaissances en ingénierie dans le domaine de la biologie et de la médecine. L'un des domaines les plus pertinents de cette ingénierie est le domaine de l'électronique biomédicale, dans lequel les concepts de l'électronique sont appliqués pour le...
Voir

14.3.- ÉQUIPEMENT BIOMÉDICAL

Équipement Biomédical est l'ensemble des instruments utilisés dans le domaine de la médecine, biologie et pharmacologie. La conception de l'équipement biomédical est directement liée à l'instrumentation biomédicale, dans laquelle les instruments sont conçus pour obtenir des informations,...
Voir
PRODUITS DE GÉNIE BIOMÉDICAL
Affichage 37-48 de 181 article(s)
GYROSCOPE - MGI
  • MGI
Available
7.1.3.- STATIQUE ET DYNAMIQUE
MGI
Gyroscope
The Gyroscope, "MGI", allows the experimental demonstration of the different rotation modes of a gyroscope and the moments generated by the gyroscopic effect. The rotor of the electric motor (rotating motor) shares a horizontally supported shaft...
CENTRIFUGAL GOVERNOR UNIT - CGU
  • CGU
Available
7.1.3.- STATIQUE ET DYNAMIQUE
CGU
Unité du Gouverneur Centrifuge
The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...
STATIC AND DYNAMIC BALANCING UNIT - MED
  • MED
Available
7.1.3.- STATIQUE ET DYNAMIQUE
MED
Unité d'Equilibrage Statique et Dynamique
The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...
SIMPLE BALANCING UNIT - MES
  • MES
Available
7.1.3.- STATIQUE ET DYNAMIQUE
MES
Unité d´Équilibrage Simple
The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...
INERTIA FLYWHEEL UNIT - MIF
  • MIF
Available
7.1.3.- STATIQUE ET DYNAMIQUE
MIF
Unité de Volant d’Inertie
The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...
WHEEL AND AXLE UNIT  - MRYE1
  • MRYE1
Available
7.1.3.- STATIQUE ET DYNAMIQUE
MRYE1
Unité de Roue et Axe
The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...
UNIT FOR STUDYING HOOKE´S LAW - MELH
  • MELH
Available
7.1.3.- STATIQUE ET DYNAMIQUE
MELH
Unité d'Étude de la Loi de Hooke
The Unit for studying Hooke's Law, "MELH", demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring – mass system.The...
WHEEL AND DIFFERENTIAL AXLE UNIT  - MRYE2
  • MRYE2
Available
7.1.3.- STATIQUE ET DYNAMIQUE
MRYE2
Unité de Roue et Axe Différentiel
The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...
VIBRATION OF COIL SPRING UNIT - MVRE
  • MVRE
Available
7.1.4.- VIBRATIONS ET OSCILLATIONS
MVRE
Unité de Vibration de Ressorts Hélicoïdaux
The Vibration of Coil Spring Unit, "MVRE", unit has been designed to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion. In this sense, the unit consists of a rigid...
FREE VIBRATION UNIT - MVL
  • MVL
Available
7.1.4.- VIBRATIONS ET OSCILLATIONS
MVL
Unité de Vibrations Libres
The Free Vibration Unit, "MVL", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be made to the...
FREE & FORCED VIBRATION UNIT - MVLF
  • MVLF
Available
7.1.4.- VIBRATIONS ET OSCILLATIONS
MVLF
Unité de Vibrations Libres et Forcées
The Free and Forced Vibration Unit, "MVLF", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free and forced vibrations of a simple spring-mass-damper system. Simple...
Demander des informations