2.- ELECTRONICS

Electronics is the branch of physics focused on the behavior of electrons. In engineering, electronics is the part that studies and develops electronic circuits so that the electrons circulating through them have the behavior required by the specifications of the application.

View more

Electronics has been one of the most developed disciplines throughout the 20th century, going from having a very limited application as power supplies to having a great impact on society. Some examples of key electronic applications to understand this great influence are the sensors and meters of all kinds of physical quantities such as pressure level, flow level and temperature measurement, the use of electronic amplifiers and filters, the development of integrated circuits, microprocessors and personal computers, the development of transistors of different technologies such as MOSFET, JFET, BJT, IGBT, etc.

Electronics applications are almost endless, and new contributions are improved and added each year. Depending on the application of the electronic circuits the following groups are differentiated: analog electronics and digital electronics depending on whether binary or analog signals are used, power electronics depending on whether high electric currents and electric voltages are used, electronic instrumentation depending on whether they are used to make electronic measurements of physical quantities, etc.

The future of electronics focuses on the miniaturization of electronic components, increasing their efficiency and speed. In this work, the discovery of revolutionary new materials, such as graphene or silicene, is of key importance.

View Products
Related Materials
ELECTRONICS SUBCATEGORIES

2.1.- POWER SUPPLIES, MEASUREMENT EQUIPMENT AND ACCESSORIES

The electronic laboratory equipment is the set of instruments required to carry out the experimentation in a practical session of electronics. The characteristics of the equipment will depend on the theoretical level of the laboratory to be equipped, whether it is a technical high school, a...
View

2.2.- KITS FOR CIRCUITS ASSEMBLY

The electronic development phase of a device is a group of stages carried out to obtain a product that meets the required specifications.The most characteristic stages of any electronic device development are: defining the equipment specifications, designing the different electronic circuits that...
View

2.3.- THEORETICAL - PRACTICAL FUNDAMENTALS

The electronics fundamentals are the set of knowledge aimed at providing the student with a solid base to analyze and understand the general operation of the most common electronic circuits, and the individual function of the electronic components that compose them.Acquiring a good theoretical...
View

2.4.- INDUSTRIAL ELECTRONICS

Industrial electronics is a branch of electronic engineering that focuses on industrial-grade electronic systems. One of the most important branches of industrial electronics is power electronics, which is responsible for the development of electronic applications that control and regulate high...
View

2.5.- AUTOMOTIVE ELECTRONICS

Automotive electronics is the branch of electronic engineering focused exclusively on the development of electrical and electronic systems specially designed to be installed in the car. All the systems developed in automotive electronics are adapted to withstand the harsh operation conditions in...
View
2.1.- POWER SUPPLIES, MEASUREMENT EQUIPMENT AND ACCESSORIES 2.2.- KITS FOR CIRCUITS ASSEMBLY 2.3.- THEORETICAL - PRACTICAL FUNDAMENTALS 2.4.- INDUSTRIAL ELECTRONICS 2.5.- AUTOMOTIVE ELECTRONICS

ELECTRONICS EQUIPMENT

1.- PHYSICS 2.- ELECTRONICS 3.- COMMUNICATIONS 4.- ELECTRICITY 5.- ENERGY 6.- MECHATRONICS & AUTOMATION 7.- MECHANICS 8.- FLUID MECHANICS 9.- THERMODYNAMICS & THERMOTECHNICS 10.- PROCESS CONTROL 11.- CHEMICAL ENGINEERING 12.- FOOD & WATER TECHNOLOGIES 13.- ENVIRONMENT 14.- BIOMEDICAL ENGINEERING LABORATORY ACCESSORIES CUSTOMIZED PILOT PLANTS
2.1.- POWER SUPPLIES, MEASUREMENT EQUIPMENT AND ACCESSORIES 2.2.- KITS FOR CIRCUITS ASSEMBLY 2.3.- THEORETICAL - PRACTICAL FUNDAMENTALS 2.4.- INDUSTRIAL ELECTRONICS 2.5.- AUTOMOTIVE ELECTRONICS
2.3.1.- BASIC ELECTRICAL LAWS CONCEPTS 2.3.2.- ANALOG ELECTRONICS 2.3.3.- DIGITAL ELECTRONICS 2.3.4.- SEMICONDUCTORS 2.3.5.- INSTRUMENTATION & CONTROL 2.3.6.- POWER ELECTRONICS (FUNDAMENTALS) 2.4.1.- INSTRUMENTATION & CONTROL 2.4.2.- ELECTRICAL SERVOMOTORS 2.4.3.- POWER ELECTRONICS
Showing 73-108 of 122 item(s)
12 24 36
PRESSURE TEST MODULE - BS3
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS3

Pressure Test Module

Accessory of BS
The Pressure Test Module, "BS3", has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques. On the left upper side of the module there is a pressure...
View Unit
FLOW TEST MODULE - BS4
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS4

Flow Test Module

Accessory of BS
The objective of Flow Test Module, "BS4", is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve tank,...
View Unit
OVENS TEST MODULE - BS5
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS5

Ovens Test Module

Accessory of BS
With the Ovens Test Module, "BS5", is possible to study temperature measurement techniques using several kinds of sensors placed inside the sealed place that is used as oven.This module is basically made up of an oven that contains a changeable...
View Unit
LIQUID LEVEL TEST MODULE - BS6
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS6

Liquid level Test Module

Accessory of BS
The Liquid level Test Module, "BS6", has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...
View Unit
TACHOMETER TEST MODULE - BS7
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS7

Tachometer Test Module

Accessory of BS
The Tachometer Test Module, "BS7", has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...
View Unit
PROXIMITY TEST MODULE - BS8
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS8

Proximity Test Module

Accessory of BS
The Proximity Test Module, "BS8", has been designed to teach techniques to detect the proximity of objects, focusing on the distance at which each sensor is able to detect the object and the type of material it can detect. In the upper part there...
View Unit
PNEUMATIC TEST MODULE - BS9
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS9

Pneumatic Test Module

Accessory of BS
The Pneumatics Test Module, "BS9", has been designed to teach techniques of control and handling of a pneumatic piston.All connections of the different BS9 mechanisms will have output through a group of 2 mm. terminals. They are placed in the...
View Unit
LIGHT TEST MODULE - BS10
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

BS10

Light Test Module

Accessory of BS
The objective of the Light Test Module, "BS10", is to show some of the techniques used to measure light or illumination intensity.The module is equipped with a lamp whose light intensity can be controlled by the variation of the voltage...
View Unit
TRANSDUCERS AND INSTRUMENTATION UNIT - SAIT
  • SAIT
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION

SAIT

Transducers and Instrumentation Unit

The Transducers and Instrumentation Unit, "SAIT", has been designed by EDIBON to show most of the devices used in the industry that allow the electronic systems to communicate with the real world, to measure physical variables and to control...
View Unit
PID CONTROL AND REGULATION FUNDAMENTALS UNIT - RYC/B
  • RYC/B
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC/B

PID Control and Regulation Fundamentals Unit

The regulation of dynamic systems is a fundamental component of engineering, as it allows process variables to be maintained within desired limits despite external disturbances or internal changes. To achieve this, control strategies such as the...
View Unit
COMPUTER CONTROLLED MODULAR CONTROL AND REGULATION UNIT - RYC/T
  • RYC/T
Available
10.1.- THEORETICAL - PRACTICAL FUNDAMENTALS

RYC/T

Computer Controlled Modular Control and Regulation Unit

Regulation and control theory is divided into two major divisions in, namely, classical and modern. The implementation of classical controller designs as compared to systems designed using modern control theory is easier and these controllers are...
View Unit
PID CONTROL AND REGULATION OF A DC SERVOMOTOR UNIT - RYC-SM
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-SM

PID Control and Regulation of a DC Servomotor Unit

Accessory of RYC, RYC/T
The PID Control and Regulation of a DC Servomotor Unit, "RYC-SM", designed by EDIBON, enables the practical study of automatic control systems through the precise regulation of position and speed in a DC servomotor.This unit allows students and...
View Unit
PID TEMPERATURE CONTROL AND REGULATION OF AIR FLOW UNIT - RYC-TAR
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-TAR

PID Temperature Control and Regulation of Air Flow Unit

Accessory of RYC, RYC/T
The PID Temperature Control and Regulation of Air Flow Unit, "RYC-TAR", designed by EDIBON, enables the practical study of automatic control systems through the precise regulation of the temperature of an air stream at different points in the...
View Unit
PID CONTROL AND REGULATION OF AN INVERTED PENDULUM UNIT - RYC-PI
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-PI

PID Control and Regulation of an Inverted Pendulum Unit

Accessory of RYC, RYC/T
The PID Control and Regulation of an Inverted Pendulum Unit, "RYC-PI", de­signed by EDIBON, enables the practical study of automatic control systems through the control of the linear position of a moving cart and the stabilization of a pendulum in...
View Unit
PID MAGNETIC LEVITATION CONTROL AND REGULATION UNIT - RYC-CLM
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-CLM

PID Magnetic Levitation Control and Regulation Unit

Accessory of RYC, RYC/T
The PID Magnetic Levitation Control and Regulation Unit, "RYC-CLM", desig­ned by EDIBON, enables the practical study of automatic control systems throu­gh the regulation of the vertical position of a magnetically levitated metal ball.This unit...
View Unit
PID TEMPERATURE CONTROL AND REGULATION UNIT - RYC-TE
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-TE

PID Temperature Control and Regulation Unit

Accessory of RYC, RYC/T
The PID Temperature Control and Regulation Unit, "RYC-TE", designed by EDI­BON, enables the practical study of automatic control systems through the regulation of water temperature in a tank.This unit allows students and technicians to understand...
View Unit
PID CONTROL AND REGULATION OF PRESSURE LEVEL UNIT - RYC-P
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-P

PID Control and Regulation of Pressure Level Unit

Accessory of RYC, RYC/T
The PID Control and Regulation of Pressure Level Unit, "RYC-P", designed by EDIBON, enables the practical study of automatic control systems through the regulation of air pressure level in a tank.This unit allows students and technicians to...
View Unit
PID LEVEL CONTROL AND REGULATION UNIT - RYC-N
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-N

PID Level Control and Regulation Unit

Accessory of RYC, RYC/T
The PID Level Control and Regulation Unit, "RYC-N", designed by EDIBON, enables the practical study of automatic control systems through the regulation of water level in a tank.This unit allows students and technicians to understand and apply PID...
View Unit
PID FLOW CONTROL AND REGULATION UNIT - RYC-C
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-C

PID Flow Control and Regulation Unit

Accessory of RYC, RYC/T
The PID Flow Control and Regulation Unit, "RYC-C", designed by EDIBON, enables the practical study of automatic control systems through the regulation of water flow in a closed-loop circuit.This unit allows students and technicians to understand...
View Unit
PID CONTROL AND REGULATION OF LIGHT INTENSITY UNIT - RYC-I
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-I

PID Control and Regulation of Light Intensity Unit

Accessory of RYC, RYC/T
The PID Control and Regulation of Light Intensity Unit, "RYC-I", designed by EDIBON, enables the practical study of automatic control systems through the regulation of light intensity and the analysis of three different types of light sensors.This...
View Unit
PID CONTROL AND REGULATION OF PH LEVEL UNIT - RYC-pH
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-pH

PID Control and Regulation of pH Level Unit

Accessory of RYC, RYC/T
The PID Control and Regulation of pH Level Unit, "RYC-pH", designed by EDIBON, enables the practical study of automatic control systems through the regulation of the pH level in a stirred tank.This unit allows students and technicians to...
View Unit
PID POSITION CONTROL AND REGULATION OF A MOTOR UNIT - RYC-CP
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS

RYC-CP

PID Position Control and Regulation of a Motor Unit

Accessory of RYC, RYC/T
The PID Position Control and Regulation of a Motor Unit, "RYC-CP", designed by EDIBON, enables the practical study of automatic control systems through the regulation of the linear position of a moving cart driven by a DC motor.This unit allows...
View Unit
SERVOMOTOR INDUSTRIAL APPLICATION - AE-SMI
  • AE-SMI
Available
2.4.2.- ELECTRICAL SERVOMOTORS

AE-SMI

Servomotor Industrial Application

The Servomotor Industrial Application, "AE-SMI", is designed to perform up to seven controls used in motion technology: position control,speed control, torque control, position and speed control, speed and torque control and the full-closed...
View Unit
BRUSHLESS MOTOR INDUSTRIAL APPLICATION - AE-BMI
  • AE-BMI
Available
2.4.2.- ELECTRICAL SERVOMOTORS

AE-BMI

Brushless Motor Industrial Application

The Brushless Motor Industrial Application, "AE-BMI", is designed to perform the most common control used in the industry: the position control. The "AE-BMI" application allows the student to configure up to four positions with all the parameters...
View Unit
SERVOSYSTEMS BASIC UNIT FOR DC MOTORS - SERIN/CCB
  • SERIN/CCB
Available
6.1.2.2.- POWER ELECTRONICS AND INDUSTRIAL ELECTRONICS

SERIN/CCB

Servosystems Basic Unit for DC Motors

The Servosystems Basic Unit for DC Motors, "SERIN/CCB", is an unit whose goal is studying low power servo systems. It is a low power DC motor speed control trainer that has a breakdown simulator.This unit is a basic version of the Computer...
View Unit
1 KW AC INDUSTRIAL SERVOMOTOR APPLICATION - AEL-SERIN/CA-1KW
  • AEL-SERIN/CA-1KW
Available
6.1.2.2.- POWER ELECTRONICS AND INDUSTRIAL ELECTRONICS

AEL-SERIN/CA-1KW

1 kW AC Industrial Servomotor Application

The 1 kW AC Industrial Servomotor Application, "AEL-SERIN/CA-1KW", has been designed to study the working principle and control of industrial servomotors. The "AEL-SERIN/CA-1KW" allows the user to acquire knowlegde and experience in the control of...
View Unit
COMPUTER CONTROLLED ADVANCED POWER ELECTRONICS APPLICATION - AE-PEC
  • AE-PEC
Available
2.4.3.- POWER ELECTRONICS

AE-PEC

Computer Controlled Advanced Power Electronics Application

The Computer Controlled Advanced Power Electronics Application, "AE-PEC", includes various modules that allow exploration of different aspects of power electronics. The modular design of this application ensures flexibility and adaptability to...
View Unit
Ask for information