Best sellers
Showing 829-864 of 927 item(s)
12 24 36
STEPPER MOTOR CONTROL - N-EM-MPP
  • N-EM-MPP
Available
6.2.2.4.- ELECTRICAL MACHINES CONTROL
N-EM-MPP
Stepper Motor Control
The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...
View Unit
STIRLING MOTOR - TMSB
  • TMSB
Available
9.8.- THERMAL MACHINES
TMSB
Stirling Motor
The Stirling Motor, "TMSB", is used to demonstrate the operation of a thermodynamic machine for the conversion of energy. It converts thermal energy into mechanical energy and operates as a motor (heat engine). Additionally it can operate an...
View Unit
STRAIN GAUGE TRAINING UNIT - MEGE
  • MEGE
Available
7.3.1.- PHOTOELASTICITY AND STRAIN MEASUREMENT
MEGE
Strain Gauge Training Unit
The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...
View Unit
STRESS HYPOTHESES UNIT - STH
  • STH
Available
7.1.6.- STRUCTURAL MECHANICS
STH
Stress Hypotheses Unit
The Stress Hypotheses Unit, "STH", has been designed by EDIBON to study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are...
View Unit
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- MECHANICAL TEST
MFLT
Strut Buckling Unit
The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
View Unit
SUSPENSION BRIDGE UNIT - MVS
  • MVS
Available
7.1.6.- STRUCTURAL MECHANICS
MVS
Suspension Bridge Unit
The Suspension Bridge Unit, "MVS", has been meticulously designed by EDIBON to explore the dynamics of stresses in a suspension bridge system. This unit simulates a suspension bridge using a deck and two parallel main cables, allowing students to...
View Unit
SWITCHING IN TRANSMISSION AND DISTRIBUTION SUBSTATIONS APPLICATION - AEL-SST-01
  • AEL-SST-01
Available
5.1.3.3.- POWER DISTRIBUTION AND LOADS
AEL-SST-01
Switching in Transmission and Distribution Substations Application
The Switching in Transmission and Distribution Substations Application, "AEL-SST-01", has been developed by EDIBON to study the most common operations carried out in these substations, such as, transference of the electrical service from the first...
View Unit
TACHOMETER TEST MODULE - BS7
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BS7
Tachometer Test Module
Accessory of BS
The Tachometer Test Module, "BS7", has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...
View Unit
TEACHING CREAM SEPARATOR - DSN
  • DSN
Available
12.2.- DAIRY PRODUCTS TREATMENT
DSN
Teaching Cream Separator
The Teaching Cream Separator, "DSN", allows the study of the separation of a dense phase liquid from a lighter phase liquid, in particular the separation of the cream from the milk in a disk stack centrifuge.The system is mounted on a table base...
View Unit
TELEPHONY SYSTEMS UNIT - CODITEL
  • CODITEL
Available
3.3.- APPLIED COMMUNICATIONS
CODITEL
Telephony Systems Unit
CODITEL is a digital circuit commutation unit for didactic purposes. Its structure is like a temporal commutator structure with two MIC ways, one inlet way and one outlet way. Basically, it follows the recommendation of the CCITT and of...
View Unit
TEMPERATURE MEASUREMENT TRAINING UNIT - TEMT
  • TEMT
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TEMT
Temperature Measurement Training Unit
The Temperature Measurement Training Unit, "TEMT", allows to compare the response of several devices to measure the temperature for different flows and different installation position of these devices.The unit includes four different measuring...
View Unit
TEMPERATURE MEASUREMENT UNIT - TMT
  • TMT
Available
9.1.- FUNDAMENTALS AND BASIC CONCEPTS OF THERMODYNAMICS
TMT
Temperature Measurement Unit
The Temperature Measurement Unit, "TMT", works as a temperature meter that uses different temperatures measuring devices to compare, check and analyze the temperature and how is the precision for the measure and for the device that the student has...
View Unit
TEMPERATURE TEST MODULE - BS2
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BS2
Temperature Test Module
Accessory of BS
The Temperature Test Module, "BS2", has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space....
View Unit
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- MECHANICAL TEST
MTTU
Tensile Tester Unit
With the Tensile Tester Unit, "MTTU", designed by EDIBON, tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests...
View Unit
THERMAL CONDUCTIVITY OF LIQUID AND GAS UNIT FOR TSTCC - TXC/LG
Available
9.6.- HEAT TRANSFER
TXC/LG
Thermal Conductivity of Liquid and Gas Unit for TSTCC
Accessory of TSTCC
The Thermal Conductivity Measurement Unit for Liquids and Gases for TSTCC, "TXC/LG", enables the study of the thermal conductivity of any gas or liquid compatible with the construction materials.This unit has been designed to enable students to...
View Unit
THERMAL EFFECTS OF MICROWAVES IN BIOMEDICINE UNIT - BIMTE
  • BIMTE
Available
14.3.- BIOMEDICAL EQUIPMENT
BIMTE
Thermal Effects of Microwaves in Biomedicine Unit
The Thermal Effects of Microwaves in Biomedicine Unit, "BIMTE", designed by EDIBON, allows the students to test microwave therapy, so as to achieve a better knowledge on its functioning and internal mechanism.The Thermal Effects of Microwaves in...
View Unit
THERMAL SOLAR ENERGY BASIC UNIT - MINI-EEST
  • MINI-EEST
Available
5.3.2.- SOLAR THERMAL ENERGY
MINI-EEST
Thermal Solar Energy Basic Unit
This unit is a system that transforms solar energy into usable thermal energy.This unit uses the thermosiphon system to heat water or the traditional pumping system. In both cases, the absorbed thermal energy is given by the simulated solar...
View Unit
THERMAL SOLAR ENERGY UNIT - EEST
  • EEST
Available
5.3.2.- SOLAR THERMAL ENERGY
EEST
Thermal Solar Energy Unit
The Thermal Solar Energy Unit, "EEST", is a system that transforms solar energy into usable thermal energy. It uses the thermosiphon solar system to heat water or the traditional pumping system. In both cases, the absorbed thermal energy is given...
View Unit
THICK WALLED CYLINDER UNIT - MCPG
  • MCPG
Available
7.1.6.- STRUCTURAL MECHANICS
MCPG
Thick Walled Cylinder Unit
In the Thick-Walled Cylinder Unit, "MCPG", designed by EDIBON, the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum...
View Unit
THIN CYLINDER UNIT - MCD
  • MCD
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)
MCD
Thin Cylinder Unit
The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...
View Unit
THREE AXES HEAT TRANSFER UNIT FOR TSTCC - TXC/TE
Available
9.6.- HEAT TRANSFER
TXC/TE
Three Axes Heat Transfer Unit for TSTCC
Accessory of TSTCC
The Three-Axis Heat Transfer Unit for TSTCC, "TXC/TE", enables the study of heat transfer by analyzing its direction along the three axes.Bench-top unit designed to carry out heat transfer experiments and exercises studying the direction in three...
View Unit
THREE-HINGED ARCH UNIT - MART
  • MART
Available
7.1.6.- STRUCTURAL MECHANICS
MART
Three-Hinged Arch Unit
The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...
View Unit
THREE-PHASE CIRCUITS MODULE - N-M18
  • N-M18
Available
14.2.1.1.- BASIC ELECTRICAL LAWS CONCEPTS
N-M18
Three-phase Circuits Module
Three-phase voltage is essentially a system of three alternating voltages, coupled (all 3 are produced simultaneously in a generator) and 120º out of phase with each other (i.e. one third of the period).The Three-phase Circuits Module, "N-M18",...
View Unit
THREE-PHASE INSTALLATIONS FAULTS APPLICATION - AEL-AD33T
  • AEL-AD33T
Available
4.1.2.2.- ELECTRICAL RISKS AND PROTECTIONS
AEL-AD33T
Three-phase Installations Faults Application
The Three-phase Installations Faults Application, "AEL-AD33T", has been designed to study several protections belonging to industrial installations. Through safety elements, the students can simulate different faults and verify the reasons why...
View Unit
THREE-PHASE TRANSFORMER APPLICATION - AEL-TPTT
  • AEL-TPTT
Available
4.3.1.- TRANSFORMERS APPLICATIONS
AEL-TPTT
Three-Phase Transformer Application
The Three-Phase Transformer Application, "AEL-TPTT", has been designed by EDIBON to allow the students learn how to carry out different three-phase transformer tests and how they work.With this application the user will study the basic operating...
View Unit
TORSION AND BEND UNIT - MTP
  • MTP
Available
7.3.2.1.- MECHANICAL TEST
MTP
Torsion and Bend Unit
The Torsion and Bend Unit, "MTP", designed by EDIBON, is a combined unit for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate...
View Unit
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- MECHANICAL TEST
MTT
Torsion Test Unit (30Nm)
To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
View Unit
TORSION UNIT - MTB
  • MTB
Available
7.3.2.1.- MECHANICAL TEST
MTB
Torsion Unit
The Torsion Unit, "MTB", has been designed by EDIBON to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a...
View Unit
TORSIONAL OSCILLATIONS UNIT - MOT
  • MOT
Available
7.1.4.- VIBRATIONS AND OSCILLATIONS
MOT
Torsional Oscillations Unit
The Torsional Oscillations Unit, "MOT", is intended for easy experiments. It enables to illustrate and investigate the torsional oscillation in single rotor, multi-rotor and geared systems. The unit basically consists of a rigid frame that have...
View Unit
TRAFFIC SIGNAL CONTROL - N-EM-CST
  • N-EM-CST
Available
6.2.2.5.- TRAFFIC & PARKING CONTROL
N-EM-CST
Traffic Signal Control
The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...
View Unit
TRANSDUCERS AND INSTRUMENTATION UNIT - SAIT
  • SAIT
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
SAIT
Transducers and Instrumentation Unit
The Transducers and Instrumentation Unit, "SAIT", has been designed by EDIBON to show most of the devices used in the industry that allow the electronic systems to communicate with the real world, to measure physical variables and to control...
View Unit
TRANSMISSION LINES UNIT - ELT
  • ELT
Available
3.2.1.- CODING, MODULATION AND SIGNAL PROCESSING THEORY
ELT
Transmission Lines Unit
The Transmission Lines Unit, "ELT", has been designed by EDIBON to study a standardized coaxial line to analyze realistic measurements.The Transmission Lines Unit "ELT" has been designed as integrated unit for help the student to understand the...
View Unit
TRANSMISSIONS EXPERIMENTS - MECA3
Available
7.1.1.- MECHANICS FUNDAMENTALS KITS
MECA3
Transmissions Experiments
Accessory of LIMEBA
Most recent machines require the transmission of motion between elements to obtain the desired mechanical result. The mechanisms studied in this module are those that transmit motion between two axles.
View Unit
TRANSPARENT VORTEX FLOW METER - FME30
  • FME30
Available
8.1.2.- MEASUREMENT
FME30
Transparent Vortex Flow Meter
The Transparent Vortex Flow Meter, "FME30", designed by EDIBON allows to perform studies and experiments of different volumetric and mass flow measurement methods, as well as the comparison of continuous and discontinuous methods.This unit...
View Unit
Ask for information