Best sales

Best sellers

Showing 769-792 of 941 item(s)

RADIATION HEAT TRANSFER UNIT FOR TSTCC - TXC/RC

Accessory of TSTCC

Available

9.6.- HEAT TRANSFER

TXC/RC

Radiation Heat Transfer Unit for TSTCC

Accessory of TSTCC

The Radiation Heat Transfer Unit for TSTCC, "TXC/RC," allows the study of the principles of heat transfer and exchange by radiation.Bench-top unit designed to demonstrate the laws of radiant heat transfer and radiant heat exchange.

Available

13.1.- HYDROLOGY AND HYDROGEOLOGY

RHU

Rainfall Hydrographs Unit

The main element of the Rainfall Hydrographs Unit,"RHU", is a tank mounted on a frame. The tank can be filled with sand. There are removable curtains to prevent splashing.There are two square pattern spray nozzles at the top that supply water to...

RAINFALL SIMULATOR FOR SOIL EROSION STUDIES - RSES

RSES

Available

13.1.- HYDROLOGY AND HYDROGEOLOGY

RSES

Rainfall Simulator for Soil Erosion Studies

The Rainfall Simulator for Soil Erosion Studies, "RSES", designed by EDIBON, consists of a metal frame that can be placed directly on the ground for direct field studies or used with its various accessories for laboratory tests. The whole...

REACTIVE POWER COMPENSATION APPLICATION - AEL-RPC

AEL-RPC

Available

5.1.3.3.- POWER DISTRIBUTION AND LOADS

AEL-RPC

Reactive Power Compensation Application

The Reactive Power Compensation Application, "AEL-RPC", has been designed to study the reactive power effects in AC circuits, due to reactive loads, and its compensation procedures.Reactive power can be described as the quantity of "unused" power...

N-EM-CR

Available

6.2.2.1.- MANUFACTURING SYSTEMS

N-EM-CR

Reactor Control

The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...

Accessory of QRQC

Available

11.2.- CHEMICAL REACTORS

QRSA

Reactors with Stirrer in Series

Accessory of QRQC

The Series Stirred Reactors, "QRSA", designed by EDIBON, provide the ability to investigate the kinetics of liquid-liquid homogeneous reactions and conduct experiments with multiple reactors in series. This configuration allows the outlet flow of...

RECIRCULATING AIR CONDITIONING UNIT - TARB

TARB

Available

9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

TARB

Recirculating Air Conditioning Unit

The Recirculating Air Conditioning Unit, "TARB", has been designed by EDIBON to study both the changes in the air conditions and the refrigeration circuit. For that purpose, temperature sensors, pressure meters and flow meters have been...

REFRIGERATION CYCLE DEMONSTRATION UNIT - TCRB

TCRB

Available

9.4.- REFRIGERATION

TCRB

Refrigeration Cycle Demonstration Unit

The Refrigeration Cycle Demonstration Unit, "TCRB", designed by EDIBON, allows the demonstration of vapour compression refrigeration and heat pump cycle with visual observation of all important processes.The vapour compression refrigeration and...

REFRIGERATION OR HEATING WATER RECIRCULATION ADVANCED UNIT - TERA/A

TERA/A

Available

SERVICES MODULES

TERA/A

Refrigeration or Heating Water Recirculation Advanced Unit

The Refrigeration or Heating Water Recirculation Advanced Unit, "TERA/A", is a reversible heat pump, which allows heating and cooling a volume of water for the study of heat transfer and temperature regulation of a fluid. Using a constant flow of...

REFRIGERATION OR HEATING WATER RECIRCULATION UNIT - TERA

TERA

Available

SERVICES MODULES

TERA

Refrigeration or Heating Water Recirculation Unit

The Refrigeration Water Recirculation Unit, "TERA", is a reversible heat pump that allows the heating and cooling of a volume of water.It is a recirculation heat pump designed to provide a continuous supply of water cooled or heated at the...

REFRIGERATION SYSTEM WITH REFRIGERATION AND FREEZING STAGE MODEL - TRAMC/2

Accessory of TRAMC

Available

9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING

TRAMC/2

Refrigeration System with Refrigeration and Freezing Stage Model

Accessory of TRAMC

The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...

RERVERSIBLE HEAT PUMP + AIR CONDITIONING + REFRIGERATION WITH 2 CONDENSERS AND 2 EVAPORATORS (WATER/AIR) - THIBAR22B

THIBAR22B

Available

9.3.- HEAT PUMPS

THIBAR22B

Rerversible Heat Pump + Air Conditioning + Refrigeration with 2 Condensers and 2 Evaporators (Water/Air)

The unit "THIBAR22B" has as aim introduce the student to the study of the heat pumps, air conditioning and refrigeration, as well as the analysis and determination of the operation typical parameters of the unit depending on the two types of...

Available

2.3.5.- INSTRUMENTATION & CONTROL

M41

Resistance Transducers

This unit allows different practices related to resistance transducers to be carried out. The unit has five different types of transducers: PTC, NTC, LDR, strain gauge and RTD.The operation of thermistors is based on the principle that the...

EPAB

Available

11.1.2.- EVAPORATION

EPAB

Rising Film Evaporator

The objective of evaporation is to concentrate a non-volatile solute, carrying out the elimination of a volatile compound. Water is the volatile compound used in most evaporations.Basically, the unit consists of the following circuits:The feed...

Available

13.1.- HYDROLOGY AND HYDROGEOLOGY

RFS

River Flow Simulator

The River Flow Simulator, "RFS", designed by EDIBON, allows the simulation and study of the river features, included the flow and solid bed load motion.The main element is a rectangular tank made of stainless steel supported on a metal beam frame,...

AE-BR

Available

6.2.5.5.- ROBOTIC WORKSTATIONS APPLICATIONS

AE-BR

Robotic Arm Workstation

The "AE-BR" is a robotic arm workstation with the programming console included. The robotic arm can command the pneumatic gripper or the electrical driller installed in it.The "AE-BR" workstation is able to perform a lot of functions including:...

Accessory of MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-4

Rolling Friction in Wheels

Accessory of MEMT

This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...

N-EM-CL

Available

6.2.2.1.- MANUFACTURING SYSTEMS

N-EM-CL

Rolling Mill Control

FME36

Available

8.1.2.- MEASUREMENT

FME36

Rotameter

The Rotameter, "FME36", designed by EDIBON, is a device developed for the study of flow measurement in fluid systems. This unit allows students to analyze the operating principle of variable area flowmeters with a float, which are widely used in...

ROTATIONAL SPEED & POSITION CONTROL - M47

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M47

Rotational Speed & Position Control

The unit is equipped with a DC motor whose rotation speed can be controlled by the supply voltage. The following sensors are arranged along the motor shaft: optical slot sensor, inductive sensor, infrared reflection sensor, Hall effect sensor,...

Available

7.1.2.1.- MECHANISMS

MYE

Scotch Yoke Mechanism

The Scotch Yoke Mechanism, "MYE", designed by EDIBON, is an example of slider-crank mechanism for converting the linear motion of a slider into rotational motion or vice versa.It is made of aluminum and consists of a rotary element, called crank,...

MSCT

Available

7.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING

MSCT

Screw Joint Testing Unit

The Screw Joint Testing Unit, "MSCT", represents the simulation of a tightening set consisting of a screw and a nut on two rectangular shaped beams.A very precise torque wrench performs the tightening through a threaded rod and a flywheel. The...

FOR FURTHER INFORMATION, CONTACT US