8.9.- INSTALLATIONS ET MAINTENANCE

Les besoins de la société actuelle sont un défi pour toute industrie, car ils doivent être en constante évolution et renouvellement pour s'adapter à ces besoins.

Voir plus

Ces dernières années, à la suite de la nouvelle révolution industrielle ou Industrie 4. 0, l'émergence de l'Internet industriel des choses (IIoT) et des usines intelligentes, cette adaptation est possible grâce à l'application des techniques les plus sophistiquées dans la conception de nouvelles installations ou dans la rénovation d'installations existantes.

Malgré toutes ces avancées technologiques et les contrôles exhaustifs effectués, il ne faut pas oublier que tout élément qui participe au processus productif va être soumis à une usure mécanique et électrique(eforces, charges, etc.) et sa vie utile est limitée. Pour éviter des pannes catastrophiques, des arrêts de production ou tout type de processus qui impliquent une augmentation des temps non-productifs et, par conséquent, une augmentation des coûts, il est extrêmement important de réaliser un bon entretien des machines, systèmes électriques, etc.

Traditionnellement, seuls deux types de entretien étaient considérés:

  • Correctif: la faute est résolue une fois qu'elle s'est déjà produite.
  • Préventive: examen périodique de tous ces éléments problématiques et leur remplacement si nécessaire.

Ces types de maintenance impliquent des coûts très élevés et inutiles dans la plupart des cas. Aujourd'hui, grâce à la technologie disponible, il est possible d'effectuer une maintenance prévictive consistant en une analyse complète de toutes les variables qui interviennent dans tous les composants d'un système et de pouvoir les remplacer au bon moment./div>

Mais, si l'on préfère mieux maîtriser les défaillances qui peuvent affecter tous ces composants mécaniques soumis à l'usure, il existe un autre type de maintenance, appelé maintenance proactive. Il va plus loin que la maintenance préventive, en cherchant la racine du problème.

Voir les produits
PRODUITS DE INSTALLATIONS ET MAINTENANCE
Affichage 1-30 de 32 article(s)
UNIT TO STUDY A WATER METER CUTAWAY MODEL - WMCM
  • WMCM
Available
8.9.1.- MODÈLES EN COUPE
WMCM
Unité de Modèle de Compteur d'Eau Sectionné
The Unit to Study a Water Meter Cutaway Model, "WMCM", allows the students to visualize the inner parts of a water meter, to evaluate the relation with each other accurately and to understand their function.It is a model of a device that measures,...
UNIT TO STUDY AN UNDERGROUND HYDRANT CUTAWAY MODEL - UHCM
  • UHCM
Available
8.9.1.- MODÈLES EN COUPE
UHCM
Unité de Modèle d'Hydrant Souterrain Sectionné
The Unit to Study an Underground Hydrant Cutaway Model, "UHCM", allows the students to visualize the inner parts of a hydrant, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a hydrant is...
CENTRIFUGAL PUMP CUTAWAY MODEL UNIT - CPCM
  • CPCM
Available
8.9.1.- MODÈLES EN COUPE
CPCM
Unité de Modèle Sectionné d'une Pompe Centrifuge
The Centrifugal Pump Cutaway Model Unit, "CPCM", allows the students to visualize the inner parts of a centrifugal pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of centrifugal pump is...
GEAR PUMP CUTAWAY MODEL UNIT - GPCM
  • GPCM
Available
8.9.1.- MODÈLES EN COUPE
GPCM
Unité de Modèle Sectionnée d'une Pompe à Engrenages
The Gear Pump Cutaway Model Unit, "GPCM", allows the students to visualize the inner parts of a gear pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of gear pump is composed of real...
PISTON PUMP CUTAWAY MODEL UNIT - PPCM
  • PPCM
Available
8.9.1.- MODÈLES EN COUPE
PPCM
Unité de Modèle Sectionnée d'une Pompe à Piston
The Piston Pump Cutaway Model Unit, "PPCM", allows the students to visualize the inner parts of a piston pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of piston pump is composed of...
ASSEMBLY OF A SHUT-OFF VALVE UNIT - ASV
  • ASV
Available
8.9.2.- MODÈLES DÉTACHABLES
ASV
Unité de Montage d'une Vanne d'arrêt
The Assembly of a Shut-Off Valve Unit, "ASV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts list and the...
ASSEMBLY OF A MOTORIZED CONTROL VALVE UNIT - AMCV
  • AMCV
Available
8.9.2.- MODÈLES DÉTACHABLES
AMCV
Unité d'assemblage des Vannes de Contrôle Motorisées
The Assembly of a Motorized Control Valve Unit, "AMCV" is a ball motorized control valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit,...
ASSEMBLY OF A CONTROL PNEUMATIC VALVE UNIT - ACPV
  • ACPV
Available
8.9.2.- MODÈLES DÉTACHABLES
ACPV
Unité d'assemblage des Vannes de Contrôle Pneumatiques
L'Unité d'assemblage des Vannes de Contrôle Pneumatiques, "ACPV", est une vanne à soupape à soufflet fournie dans une mallette de transport qui comprend également un manuel avec des plans en deux dimensions, le dessin des pièces individuelles et...
ASSEMBLY AND MAINTENANCE OF PUMPS - AMP
  • AMP
Available
8.9.2.- MODÈLES DÉTACHABLES
AMP
Assemblage et Maintenance des Pompes
Les différents kits pour le montage et l'entretien des pompes contiennent toutes les pièces dans une mallette pour un transport facile, facilitant l'identification claire de tous les composants et permettant le montage et le démontage, l'entretien...
ASSEMBLY AND MAINTENANCE OF A SCREW PUMP UNIT - AMSP
  • Accessoire de AMP
Available
8.9.2.- MODÈLES DÉTACHABLES
AMSP
Unité d'assemblage et de Maintenance d'une Pompe à Vis
Accessoire de AMP
Les pompes à vis appartiennent au groupe des pompes volumétriques, qui utilisent une vis hélicoïdale excentrique (rotor) qui se déplace à l'intérieur d'un manchon (stator), faisant circuler le liquide entre la vis et le manchon. Les applications...
PIPES, VALVES AND FITTINGS ASSEMBLY UNIT - PVFA
  • PVFA
Available
8.9.3.- INSTALLATIONS ET MAINTENANCE
PVFA
Unité d'assemblage de Tuyaux, Vannes et Raccords
The Pipes, Valves and Fittings Assembly Unit, "PVFA", designed by EDIBON, consists of a solid and rigid U-shaped frame where a series of real pipes and fittings are mounted to form a complete hydraulic system. A filter, a sight glass and a...
THREE-WAY MIXING VALVE TRAINING UNIT - TEV3V
  • TEV3V
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TEV3V
Unité de Formation de Valvule Mélangeuse de 3 Voies
The Three-Way Mixing Valve Training Unit, "TEV3V", allows to demonstrate the function of a three-way mixing valve in a hot water heating system. The three-way mixing valve in the heating system regulates the supply water temperature to a heating...
FOUR-WAY MIXING VALVE TRAINING UNIT - TEV4V
  • TEV4V
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TEV4V
Unité de Formation de Valvule Mélangeuse de 4 Voies
The Four-Way Mixing Valve Training Unit, "TEV4V", allows to demonstrate the function of a four-way mixing valve in a hot water heating system. The four-way mixing valve in the heating system regulates the circulation and feed flow temperatures of...
SANITARY FITTINGS TRAINING UNIT - TEIS
  • TEIS
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TEIS
Unité de Formation de Raccords Sanitaires
The Sanitary Fittings Training Unit, "TEIS", has been designed by EDIBON for training in the plumbing sector. It consists of an anodized aluminum frame and panels in painted steel in which tests can be carried out with the most common systems of...
DRINKING WATER INSTALLATION UNIT - TIAP
  • TIAP
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TIAP
Unité d'Installation d'Eau Potable
The Drinking Water Installation Unit, "TIAP", has been designed to demonstrate domestic water heating from the cold water supply. A typical domestic drinking water system is attached to the front panel of the unit. The unit includes the most...
PROTECTION OF DRINKING WATER TRAINING UNIT - TPAP
  • TPAP
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TPAP
Unité de Protection en Installations d'Eau Potable
The Protection of Drinking Water Training Unit, "TPAP", has been designed by EDIBON to study cases in which the drinking water system is contaminated with wastewater. It is specially designed for the training of students in the plumbing sector.The...
PIPE CLEANING TRAINING UNIT - TELT
  • TELT
Available
9.10.3.- INSTALLATIONS ET MAINTENANCE
TELT
Unité d'Étude de Systèmes de Nettoyage de Tubes
The Pipe Cleaning Training Unit, "TELT", designed by EDIBON, simulates a real house piping system, so original components used in plumbing systems are employed.The objective of this unit is to study the cleaning of pipes from the sanitation...
Demander des informations