8.- FLUID MECHANICS

The branch of Fluid Mechanics studies the laws of the behavior of fluids at rest (fluid statics) or in motion (fluid dynamics) and their interaction processes with solid bodies. A fluid is considered to be a substance that can flow, in other words, move. Among them there are liquids (water, oil, alcohol, milk, sulfuric acid, gasoline) and gases (air, oxygen, nitrogen, helium, argon, methane, butane, natural gas).

The fluids can be found everywhere in the everyday life, from the air that surrounds us, the water in the pools and for irrigation, the hydraulic system that allows us to brake in our car, heating or air conditioning, to our own blood system. Fluid studies are based on the well-known Archimedes and Pascal’s principles, Bernoulli’s equation, Venturi effect or Darcy's law, among others. The field of Fluid Mechanics Engineering that seeks applicability is studied empirically and mathematically, highlighting dimensionless numbers such as Reynolds, Prandtl, Mach and Froude. The importance of the fluid mechanics principles have left common inventions, such as water transfers by channels, maritime and air transport, hydraulic, thermal and pneumatic machines, solutions to the problems of cavitation or water hammer in pipes, hydraulic and pneumatic transmissions and controls, etc.

Given the relevance of fluids in diverse applications, it is important to know their nature, that is to say, the type of fluid and describe it based on its properties. The most significant ones are: pressure, temperature, volume, density, viscosity, compressibility, specific heat, thermal expansion and miscibility.

View Products

Related Materials

FLUID MECHANICS SUBCATEGORIES

8.1.- FLUID MECHANICS MODULAR LABORATORY

Hydraulics is the branch of science that deals with the mechanical properties of fluids, and Fluid Mechanics is the foundation of Hydraulics. EDIBON aims to provide a simple and practical response to the academic demand for teaching and learning the basics of Fluid Mechanics. For this, it offers...

View

8.2.- MEASUREMENT

Metrology is the science that studies the measurement of magnitudes. It is based on the process that seeks to establish a relationship between a reference value and the object or phenomenon whose magnitude must be quantified and obtain an expression of the measurement.The measurements must be...

View

8.3.- HYDROSTATICS

Hydrostatics is the branch of fluid mechanics that studies the associated phenomena and behavior that occur when a fluid is in a container and there are no forces that modify the state of the liquid at rest or in motion. By contrast, hydrodynamics studies fluids in motion.Hydrostatics is based on...

View

8.4.- FLOW VISUALIZATION

The flow of fluids belongs to the branch of fluid dynamics. The studies focus on understanding the motion of fluids, determined by Newton's laws, the laws of conservation of mass and energy and other laws, such as the Stokes, the Reynolds number or Prandt, among others.The fluid motion and...

View

8.5.- HYDRAULIC CHANNELS

Water is the fundamental element used by living beings and, since ancient times, different devices have been developed for its distribution and consumption, such as channels.The hydraulic or open channel or, simply, channel is defined as a piping system open to the atmosphere and used to...

View

8.6.- AERODYNAMICS

Aerodynamics is the part of fluid mechanics that studies the gases in motion and the forces or reactions to which the bodies that interact with those gases are subjected. Apart from the importance of aerodynamics in itself, the value of its contribution to aeronautics must be added. According to...

View

8.7.- FLUID MACHINES

A special app,lication area in fluid mechanics is the one responsible for the study of fluid machines. Fluid machines are devices that convert the energy of the fluid that passes through them or transfer energy to the fluid. That fluid can be gas, steam or liquid.Based on this definition, fluid...

View

8.8.- FLUID PIPING SYSTEM

In engineering, a fluid piping system is defined as the structure or construction that transports a fluid from a source to the required destination. Two types of conduits are distinguished: closed conduits (pipes, tunnels or culverts) and open conduits (natural currents). Flow in closed conduits...

View

8.9.- INSTALLATIONS AND MAINTENANCE

The needs of today's society are a challenge for any industry, since they have to be in continuous evolution and renewal to adapt to those needs.In recent years, as a result of the new industrial revolution or "Industry 4.0", the emergence of the "Industrial Internet of Things" ("IIoT") and the...

View

8.1.- FLUID MECHANICS MODULAR LABORATORY 8.2.- MEASUREMENT 8.3.- HYDROSTATICS 8.4.- FLOW VISUALIZATION 8.5.- HYDRAULIC CHANNELS 8.6.- AERODYNAMICS 8.7.- FLUID MACHINES 8.8.- FLUID PIPING SYSTEM 8.9.- INSTALLATIONS AND MAINTENANCE

FLUID MECHANICS EQUIPMENT

Showing 73-108 of 166 item(s)

MOBILE BED AND FLOW VISUALIZATION UNIT (WORKING SECTION: 2000X610 MM) - HVFLM-2

HVFLM-2

Available

13.1.- HYDROLOGY AND HYDROGEOLOGY

HVFLM-2

Mobile Bed and Flow Visualization Unit (working section: 2000X610 mm)

The Mobile Bed and Flow Visualization Unit (working section: 2000x610 mm), "HVFLM-2", may be used mainly in two study fields. The first one is the investigation of mobile beds, which are related to water courses and civil engineering structures....

MOBILE BED AND FLOW VISUALIZATION UNIT (WORKING SECTION: 4000X610 MM) - HVFLM-4

HVFLM-4

Available

13.1.- HYDROLOGY AND HYDROGEOLOGY

HVFLM-4

Mobile Bed and Flow Visualization Unit (working section: 4000x610 mm)

The Mobile Bed and Flow Visualization Unit (working section: 4000 x 610 mm), "HVFLM-4", may be used mainly in two study fields. The first one is the investigation of mobile beds, which are related to water courses and civil engineering structures....

COMPUTER CONTROLLED SUPERSONIC WIND TUNNEL - TAS25/100C

TAS25/100C

Available

8.6.- AERODYNAMICS

TAS25/100C

Computer Controlled Supersonic Wind Tunnel

The Computer Controlled Supersonic Wind Tunnel, "TAS25/100C", is an open wind tunnel for the study of the aerodynamic properties of different drag bodies subject to subsonic and supersonic flows. Air flows through a vacuum pump or blower...

TAS25/100C-3B

Available

8.6.- AERODYNAMICS

TAS25/100C-3B

Computer Controlled Supersonic Wind Tunnel (Three Blowers)

The Computer Controlled Supersonic Wind Tunnel (Three Blowers), "TAS25/100C-3B", is an open wind tunnel for the study of theaerodynamic properties of different drag bodies subject to subsonic and supersonic flows.Airflows through three vacuum...

COMPUTER CONTROLLED AERODYNAMIC TUNNEL, 50 X 250 MM - TA50/250C

TA50/250C

Available

8.6.- AERODYNAMICS

TA50/250C

Computer Controlled Aerodynamic Tunnel, 50X250 mm

The Computer Controlled Aerodynamic Tunnel, 50 x 250 mm, "TA50/250C", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan, computer...

TA50/250

Available

8.6.- AERODYNAMICS

TA50/250

Aerodynamic Tunnel, 50X250 mm

The Aerodynamic Tunnel, 50 x 250 mm, "TA50/250", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan located at the discharge end of the...

COMPUTER CONTROLLED AERODYNAMIC TUNNEL, 300 X 300 MM - TA300/300C

TA300/300C

Available

8.6.- AERODYNAMICS

TA300/300C

Computer Controlled Aerodynamic Tunnel, 300X300 mm

The Computer Controlled Aerodynamic Tunnel, 300 x 300 mm, "TA300/300C", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan, computer...

TA300/300

Available

8.6.- AERODYNAMICS

TA300/300

Aerodynamic Tunnel, 300X300 mm

The Aerodynamic Tunnel, 300 x 300 mm, "TA300/300", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan located at the discharge end of the...

COMPUTER CONTROLLED AERODYNAMIC TUNNEL, 610 X 915 MM - TA610/915C

TA610/915C

Available

8.6.- AERODYNAMICS

TA610/915C

Computer Controlled Aerodynamic Tunnel, 610X915 mm

Aerodynamics is the part of fluid mechanics that studies the motion of gases and the forces or reactions to which the bodies they interact with are subjected. Aerodynamics is not only important by itself but also as a complement to aeronautics....

COMPUTER CONTROLLED AERODYNAMIC TUNNEL, 1000 X 1000 MM - TA1000/1000C

TA1000/1000C

Available

8.6.- AERODYNAMICS

TA1000/1000C

Computer Controlled Aerodynamic Tunnel, 1000X1000 mm

COMPUTER CONTROLLED AERODYNAMIC TUNNEL, 1200X1200 MM - TA1200/1200C

TA1200/1200C

Available

8.6.- AERODYNAMICS

TA1200/1200C

Computer Controlled Aerodynamic Tunnel, 1200X1200 mm

AERODYNAMIC TUNNEL FLIGHT DEMONSTRATION UNIT - TADV225/450

TADV225/450

Available

8.6.- AERODYNAMICS

TADV225/450

Aerodynamic Tunnel Flight Demonstration Unit

The Aerodynamic Tunnel for Flight Demonstration, "TADV225/450", designed by EDIBON, consists of an open wind tunnel in whose working section the model of an aircraft with fixed wings is located. The aircraft is piloted by the user using controls...

COMPUTER CONTROLLED CLOSED AERODYNAMIC TUNNEL, 2000X2000 MM - TACL2000/2000C

TACL2000/2000C

Available

8.6.- AERODYNAMICS

TACL2000/2000C

Computer Controlled Closed Aerodynamic Tunnel, 2000X2000 mm

AERODYNAMIC TUNNEL FOR FLOW VISUALIZATION - TAVF180/100

TAVF180/100

Available

8.4.- FLOW VISUALIZATION

TAVF180/100

Aerodynamic Tunnel for Flow Visualization

The Flow Visualization Aerodynamic Tunnel, "TAVF180/100", designed by EDIBON, consists of a vertical conduction in which an upward flow of air and smoke is induced, which passes through different models allowing to study the behavior of the flow...

ATBB

Available

8.6.- AERODYNAMICS

ATBB

Aerodynamic Testing Bench

The Aerodynamic Testing Bench, "ATBB", designed by EDIBON , has two main components: a radial fan with speed control and a working section where the different accessories for the tests are fixed.The radial blower impels the air through an air...

COMPUTER CONTROLLED MULTIPUMP TESTING BENCH (4 TYPES OF PUMPS) - PBOC

PBOC

Available

8.7.1.- PUMPS

PBOC

Computer Controlled Multipump Testing Bench (4 types of pumps)

The Computer Controlled Multipump Testing Bench (4 types of pumps), "PBOC", designed by EDIBON, allows the students to study the operating characteristics of several types of pumps. This unit allows to control and to measure the most...

COMPUTER CONTROLLED MULTIPUMP TESTING BENCH (2 TYPES OF PUMPS) - PB2C

PB2C

Available

8.7.1.- PUMPS

PB2C

Computer Controlled Multipump Testing Bench (2 types of pumps)

The Computer Controlled Multipump Testing Bench (2 types of pumps), "PB2C", designed by EDIBON, allows the students to study the operating characteristics of the centrifugal and gear pumps. This unit allows to control and to measure the most...

COMPUTER CONTROLLED SERIES/PARALLEL PUMPS BENCH - PBSPC

PBSPC

Available

8.7.1.- PUMPS

PBSPC

Computer Controlled Series/Parallel Pumps Bench

The Computer Controlled Series/Parallel Pumps Bench, "PBSPC", has been designed by EDIBON to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed...

PBSPB

Available

8.7.1.- PUMPS

PBSPB

Series/Parallel Pumps Bench

The Series/Parallel Pumps Bench, "PBSPB", has been designed by EDIBON to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed water tank,...

COMPUTER CONTROLLED GEAR PUMP BENCH - PBEC

PBEC

Available

8.7.1.- PUMPS

PBEC

Computer Controlled Gear Pump Bench

The Computer Controlled Gear Pump Bench, "PBEC", designed by EDIBON, is a bench-top unit consists of a gear pump computer controlled, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump...

COMPUTER CONTROLLED AXIAL PUMP BENCH - PBAC

PBAC

Available

8.7.1.- PUMPS

PBAC

Computer Controlled Axial Pump Bench

The Computer Controlled Axial Pump Bench, "PBAC", has been designed by EDIBON to study this type of pumps. It is a bench-top unit that consists of a computer controlled axial pump, a water tank and circulation pipes with a flow regulation valve....

COMPUTER CONTROLLED PISTON PUMP BENCH - PBRC

PBRC

Available

8.7.1.- PUMPS

PBRC

Computer Controlled Piston Pump Bench

The Computer Controlled Piston Pump Bench, "PBRC", is a bench-top unit that consists of a piston pump, a feed tank, flow meter tank calibrated for taking flow measurements, circulation pipes, manual valves and a solenoid valve, computer...

COMPUTER CONTROLLED AXIAL FLOW TURBOMACHINES UNIT - HMFAC

HMFAC

Available

8.7.3.- TURBINES

HMFAC

Computer Controlled Axial Flow Turbomachines Unit

The Computer Controlled Axial Flow Turbomachines Unit, "HMFAC", allows the study of single-stage axial turbomachines, with interchangeable vanes for the study of both a pump and a turbine.The main part of the unit is the axial turbomachine...

PBEAB

Available

8.7.1.- PUMPS

PBEAB

Pumps Alignment and Study Bench

The Pumps Alignment and Study Bench, "PBEAB", has been developed by EDIBON as a comprehensive solution for acquiring real technical skills in the installation, alignment, operation, and analysis of industrial pump behavior. This unit replicates...

COMPUTER CONTROLLED CENTRIFUGAL FAN TEACHING UNIT - HVCC

HVCC

Available

8.7.2.- FANS

HVCC

Computer Controlled Centrifugal Fan Teaching Unit

The Computer Controlled Centrifugal Fan Teaching Unit, "HVCC", allows the students to study the operation characteristics of a centrifugal fan. For that purpose, the unit carries out the measurements of flow, speed, temperature, pressure and...

HVCB

Available

8.7.2.- FANS

HVCB

Centrifugal Fan Teaching Unit

The Centrifugal Fan Teaching Unit, "HVCB", allows the students to study the operation characteristics of a centrifugal fan. For that purpose, the unit carries out the measurements of flow, speed, temperature and humidity. Multiple tests related to...

COMPUTER CONTROLLED AXIAL FAN TEACHING UNIT - HVAC

HVAC

Available

8.7.2.- FANS

HVAC

Computer Controlled Axial Fan Teaching Unit

The Computer Controlled Axial Fan Teaching Unit, "HVAC", allows the observation, the study and the working process analysis of an axial-flow fan.The main element of this unit is a computer controlled speed centrifugal fan, which is measured...

HVAB

HTMC

Available

8.7.3.- TURBINES

HTMC

Computer Controlled Hydraulic Turbines Modular Unit

Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...

FOR FURTHER INFORMATION, CONTACT US