14.- BIOMEDICAL ENGINEERING

Biomedical Engineering studies the implementation of engineering knowledge in the field of biology and medicine. The combination of instrumentation and electronic control systems and the application of mathematical algorithms and physical and chemical principles allow Biomedical Engineering to investigate and develop new techniques and devices for the resolution of clinical problems. This discipline covers from the design of diagnostic elements and medical software tools to physiological analysis for the study of the heart or the nervous system.

View more

Biomedical Engineering has evolved over the years thanks to scientific and technological advances. At present, devices such as vital signs monitoring systems or diagnostic devices facilitate medical care work. The development of image analysis methods such as X-rays, ultrasounds and magnetic resonance allow the study of the human organism clearly and quickly. In addition, telemedicine and hospital management software are used.

The future of Biomedical Engineering has a long way to go, since today's society requires fast and efficient medical solutions. The electronic devices used day to day will allow remote patient monitoring, following the vital signs values to be able to analyze the symptoms before a health problem and, even, prevent that possible problem. Another trend of Biomedical Engineering is the simplification of laboratory tools. Systems, such as Lab On a Chip (LOC), integrate laboratory functions into a single chip. New robotic surgery techniques, new organic materials for the manufacture of artificial tissues and regenerative tissues or 3D printing of artificial organs will make it possible to resolve future medical needs.

View Products
Related Materials
BIOMEDICAL ENGINEERING SUBCATEGORIES

14.1.- BIOMECHANICS

Biomechanics studies the mechanics of movement of the living beings organism, among them the human body movement. This study ranges from the simplest movements of daily life, such as work or sports activity, to the movement of some internal organs, such as the heart. To study the human body...
View

14.2.- BIOMEDICAL ELECTRONICS

Biomedical Engineering studies the application of engineering knowledge in the field of biology and medicine. One of the most relevant areas of this engineering is the Biomedical Electronics, in which the concepts of electronics are applied for the development of medical instrumentation.Nowadays,...
View

14.3.- BIOMEDICAL EQUIPMENT

Biomedical Equipment is the set of instruments used in the field of medicine, biology and pharmacology. The design of biomedical equipment is directly related to Biomedical Instrumentation, in which instruments are designed to obtain information, apply treatments or perform chemical and...
View
BIOMEDICAL ENGINEERING UNITS
Showing 37-72 of 181 item(s)
GYROSCOPE - MGI
  • MGI
Available
7.1.3.- STATICS AND DYNAMICS
MGI
Gyroscope
The Gyroscope, "MGI", allows the experimental demonstration of the different rotation modes of a gyroscope and the moments generated by the gyroscopic effect. The rotor of the electric motor (rotating motor) shares a horizontally supported shaft...
CENTRIFUGAL GOVERNOR UNIT - CGU
  • CGU
Available
7.1.3.- STATICS AND DYNAMICS
CGU
Centrifugal Governor Unit
The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...
STATIC AND DYNAMIC BALANCING UNIT - MED
  • MED
Available
7.1.3.- STATICS AND DYNAMICS
MED
Static and Dynamic Balancing Unit
The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...
SIMPLE BALANCING UNIT - MES
  • MES
Available
7.1.3.- STATICS AND DYNAMICS
MES
Simple Balancing Unit
The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...
INERTIA FLYWHEEL UNIT - MIF
  • MIF
Available
7.1.3.- STATICS AND DYNAMICS
MIF
Inertia Flywheel Unit
The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...
WHEEL AND AXLE UNIT  - MRYE1
  • MRYE1
Available
7.1.3.- STATICS AND DYNAMICS
MRYE1
Wheel and Axle Unit
The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...
UNIT FOR STUDYING HOOKE´S LAW - MELH
  • MELH
Available
7.1.3.- STATICS AND DYNAMICS
MELH
Unit for studying Hooke´s Law
The Unit for studying Hooke's Law, "MELH", demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring – mass system.The...
WHEEL AND DIFFERENTIAL AXLE UNIT  - MRYE2
  • MRYE2
Available
7.1.3.- STATICS AND DYNAMICS
MRYE2
Wheel and Differential Axle Unit
The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...
COMPUTER CONTROLLED TORSIONAL VIBRATION UNIT - MEVTC
  • MEVTC
Available
7.1.4.- VIBRATIONS AND OSCILLATIONS
MEVTC
Computer Controlled Torsional Vibration Unit
The Computer Controlled Torsional Vibration Unit, "MEVTC" is designed to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with one, two or three...
VIBRATION OF COIL SPRING UNIT - MVRE
  • MVRE
Available
7.1.4.- VIBRATIONS AND OSCILLATIONS
MVRE
Vibration of Coil Spring Unit
The Vibration of Coil Spring Unit, "MVRE", unit has been designed to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion. In this sense, the unit consists of a rigid...
FREE VIBRATION UNIT - MVL
  • MVL
Available
7.1.4.- VIBRATIONS AND OSCILLATIONS
MVL
Free Vibration Unit
The Free Vibration Unit, "MVL", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be made to the...
FREE & FORCED VIBRATION UNIT - MVLF
  • MVLF
Available
7.1.4.- VIBRATIONS AND OSCILLATIONS
MVLF
Free & Forced Vibration Unit
The Free and Forced Vibration Unit, "MVLF", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free and forced vibrations of a simple spring-mass-damper system. Simple...
UNIT FOR STUDYING FREE VIBRATION OF A BAR - MEVLB
  • MEVLB
Available
7.1.4.- VIBRATIONS AND OSCILLATIONS
MEVLB
Unit for Studying Free Vibration of a Bar
The Unit for Studying Free Vibration of a Bar,"MEVLB", allows to study the features of the free vibrations of a bending bar.The natural frequency of the bending bar can be modified adding additional loads at the free end of a bar or varying the...
SIMPLE HARMONIC MOTION UNIT - MSHU
  • MSHU
Available
7.1.3.- STATICS AND DYNAMICS
MSHU
Simple Harmonic Motion Unit
This Simple Harmonic Motion Unit, "MSHU", allows many experiments using several pendulums and devices, such as different types of pendulums (simple, bifilar, trifilar and Kater’s pendulum) and springs.Consists of a panel with a support that allows...
UNIT TO STUDY ROTATIONAL INERTIA - SRI
  • SRI
Available
7.1.3.- STATICS AND DYNAMICS
SRI
Unit to Study Rotational Inertia
The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...
TORSIONAL OSCILLATIONS UNIT - MOT
  • MOT
Available
7.1.4.- VIBRATIONS AND OSCILLATIONS
MOT
Torsional Oscillations Unit
The Torsional Oscillations Unit, "MOT", is intended for easy experiments. It enables to illustrate and investigate the torsional oscillation in single rotor, multi-rotor and geared systems. The unit basically consists of a rigid frame that have...
COMPUTER CONTROLLED CRITICAL SPEED INVESTIGATION UNIT - MVCC
  • MVCC
Available
7.1.4.- VIBRATIONS AND OSCILLATIONS
MVCC
Computer Controlled Critical Speed Investigation Unit
Some phenomena that appear in mechanical systems, such as vibration, self-centering and resonance in rotary shafts, can be clearly demonstrated with the Computer Controlled Critical Speed Investigation Unit, "MVCC". The operation of the "MVCC"...
WHIRLING OF SHAFTS UNIT - MEER
  • MEER
Available
7.1.4.- VIBRATIONS AND OSCILLATIONS
MEER
Whirling of Shafts Unit
The Whirling of Shafts Unit, "MEER", has been designed by EDIBON to demonstrate and determine different modes of oscillation and resonance of shafts with continuous distribution of mass under different conditions.The operation of the Whirling of...
BELT FRICTION UNIT - MCF
  • MCF
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)
MCF
Belt Friction Unit
The Belt Friction Unit, "MCF", allows us to carry out studies and investigations to compare the driving torque for a given degree of overlap of a flat belt (leather or rope) and a V belt.With this unit the relationship between the tensions in the...
FRICTION STUDY UNIT - MEF
  • MEF
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)
MEF
Friction Study Unit
The Friction Study Unit, "MEF", allows the unit to illustrate the friction force by simple demonstrations.It is designed for the study of the relations between friction forces and normal forces, between hard or soft surfaces, between lubricated or...
JOURNAL BEARING UNIT - MPCO
  • MPCO
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)
MPCO
Journal Bearing Unit
The Journal Bearing Unit, "MPCO", allows to study the pressure distribution in sliding bearings. It illustrates the principle of hydrodynamic lubrication.The unit is mounted on a metallic structure assembled on wheels for its mobility.The sliding...
TRIBOLOGY MODULAR UNIT - MEMT
  • MEMT
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)
MEMT
Tribology Modular Unit
The Tribology Modular Unit, "MEMT", consists of a base unit with electronic console and a series of experimental units to investigate and visualize tribological phenomena.MEMT-UB. Drive Unit for Tribological Tests. This unit is common for the...
DRIVE UNIT FOR TRIBOLOGICAL TESTS - MEMT-UB
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)
MEMT-UB
Drive Unit for Tribological Tests
Accessory of MEMT
This unit is common for the modules type "MEMT". It consists of a base unit and an electronic console:The Base Unit consists of a drive unit formed by a DC motor with a shaft. The motor is mounted in a reduction gear, obtaining enough torque in...
RADIAL PRESSURE DISTRIBUTION IN A JOURNAL BEARING - MEMT-1
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)
MEMT-1
Radial Pressure Distribution in a Journal Bearing
Accessory of MEMT
This unit allows the visualization of the radial pressure distribution in a journal bearing with hydrodynamic lubrication.The "MEMT-1" unit consists of a journal bearing with hydrodynamic lubrication, a freely moving bearing housing with thirteen...
DYNAMIC FRICTION OF A CYLINDER ON A ROLLER - MEMT-2
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)
MEMT-2
Dynamic Friction of a Cylinder on a Roller
Accessory of MEMT
This unit allows to demonstrate the friction forces between several cylinders of different materials and a roller under different lubrication conditions.The "MEMT-2" unit consists of two levers that transmit a force applied by weights to a test...
DYNAMIC FRICTION OF A PIN ON A DISC - MEMT-3
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)
MEMT-3
Dynamic Friction of a Pin on a Disc
Accessory of MEMT
This unit allows to study the friction forces between several vertical friction pins of different materials and a rotating friction disc.The end of each vertical pin is made of a different material and rubs against the rotating steel disc. The...
ROLLING FRICTION IN WHEELS - MEMT-4
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)
MEMT-4
Rolling Friction in Wheels
Accessory of MEMT
This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...
ELASTOHYDRODYNAMIC LUBRICATION - MEMT-5
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)
MEMT-5
Elastohydrodynamic Lubrication
Accessory of MEMT
This unit allows to investigate the thickness and characteristics of a lubricant film on a rolling sphere.The unit consists in a steel sphere and a driven glass disc.The sphere is pressed against the underside of the glass disc. The light from a...
FRICTION VIBRATION - MEMT-6
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)
MEMT-6
Friction Vibration
Accessory of MEMT
This module allows to demonstrate the static friction, the sliding friction, the related friction vibrations and the slip-stick effects.Several weights are placed on a horizontally rotating friction disc. It is prevented from turning by a cord....
THIN CYLINDER UNIT - MCD
  • MCD
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)
MCD
Thin Cylinder Unit
The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...
UNIT FOR STUDYING BEARING FRICTION - MBF
  • MBF
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)
MBF
Unit for Studying Bearing Friction
The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...
BELT FRICTION UNIT WITH DYNAMOMETERS - MCF/A
  • MCF/A
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)
MCF/A
Belt Friction Unit with Dynamometers
The Belt Friction Unit with Dynamometers, "MCF/A", allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.With this unit it is possible to observe the relationship between...
THICK WALLED CYLINDER UNIT - MCPG
  • MCPG
Available
7.1.6.- STRUCTURAL MECHANICS
MCPG
Thick Walled Cylinder Unit
In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...
UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG
  • MFPG
Available
7.1.6.- STRUCTURAL MECHANICS
MFPG
Unit for studying Forces in a Jib Crane
The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...
SUSPENSION BRIDGE UNIT - MVS
  • MVS
Available
7.1.6.- STRUCTURAL MECHANICS
MVS
Suspension Bridge Unit
The Suspension Bridge Unit, "MVS", consists of a deck and two parallel main cables that simulate a suspension bridge and allow the study of stress in the main cables. The deck of the bridge is simulated by a light alloy beam that is held by both...
PARABOLIC ARCH UNIT - MARP
  • MARP
Available
7.1.6.- STRUCTURAL MECHANICS
MARP
Parabolic Arch Unit
The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.One support of the arch is fixed whereas the...
Ask for information