6.1.- MECHATRONICS

Mechatronics is the area of engineering that includes mechanical engineering, electronic engineering and computer engineering. The main objective of mechatronics is the automation of machines. To achieve this objective the Automation Industry has developed electromechanical and computerized systems to have an optimal control of their industrial processes. Mathematical models to develop systems with desired behaviors are obtained with the control electronics.

View more

Nowadays, mechatronics seeks to improve the mechanisms to obtain a controlled and autonomous operation, designing PID (Proportional-Integral-Derivative Controller) control algorithms to perform feedback control and applying optimal control, predictive control and non-linear control techniques. All these control techniques are applied to the control of variables of temperature, flow, pressure, etc. using industrial instrumentation.

The continuous innovation and improvement of technology is leading mechatronics to the design of more complex and sophisticated mechanisms, with better features and a great control capacity. They can perform automated processes through pneumatic and electropneumatic actuation, obtaining quick and repetitive movements, or hydraulic or electrohydraulic actuation, obtaining large torques, precise and fast motion control through servomotor technology, and low cost industrial instrumentation, with great features and applicable in a new Industry 4.0.

View Products
MECHATRONICS UNITS
Showing 1-30 of 65 item(s)
BASIC TEACHING UNIT FOR THE STUDY OF REGULATION AND CONTROL - RYC/B
  • RYC/B
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC/B

Basic Teaching Unit for the Study of Regulation and Control

The Basic Teaching Unit for the Study of Regulation and Control, "RYC/B", allows the user to learn the basics about regulation and control of first and second order systems.This unit enables to carry a set of practices related with basic...
COMPUTER CONTROLLED MODULAR CONTROL AND REGULATION UNIT - RYC/T
  • RYC/T
Available
10.1.- THEORETICAL - PRACTICAL FUNDAMENTALS
RYC/T

Computer Controlled Modular Control and Regulation Unit

Regulation and control theory is divided into two major divisions in, namely, classical and modern. The implementation of classical controller designs as compared to systems designed using modern control theory is easier and these controllers are...
BALL AND BEAM MODULE - RYC-BB
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-BB

Ball and Beam Module

Accessory of RYC/T
The "RYC-BB" Ball and Beam module has been designed to study a practical control system, through the study of a classical control system, the Ball and Beam Control system.The "RYC-BB" module consists of two main components: the "RYC-BB" apparatus...
DC SERVO MOTOR MODULE - RYC-SM
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-SM

DC Servo Motor Module

Accessory of RYC/T
The "RYC-SM" Servo Motor module has been designed to study a practical control system, through the control of the position and speed of a DC Servo Motor.The "RYC-SM" module consists of two main components: the "RYC-SM" apparatus and the "RYC-SM"...
AIR FLOW TEMPERATURE CONTROL MODULE - RYC-TAR
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-TAR

Air Flow Temperature Control Module

Accessory of RYC/T
The "RYC-TAR" Air Flow Temperature Control module has been designed to study a practical control system, through the control of an air flow temperature.The "RYC-TAR" module consists of two main components: the "RYC-TAR" apparatus and the "RYC-TAR"...
INVERTED PENDULUM CONTROL MODULE - RYC-PI
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-PI

Inverted Pendulum Control Module

Accessory of RYC/T
The "RYC-PI" Inverted Pendulum Control module has been designed to study a practical control system, through the control of a linear position system of movable cart.The "RYC-PI" module consists of two main components: the "RYC-PI" apparatus and...
MAGNETIC LEVITATION CONTROL MODULE - RYC-CLM
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-CLM

Magnetic Levitation Control Module

Accessory of RYC/T
The "RYC-CLM" Magnetic Levitation Control module has been designed to study a practical control system.The "RYC-CLM" module consists of two main components: the "RYC-CLM" apparatus and the "RYC-CLM" interface box. The "RYC-CLM" apparatus contains...
WATER FLOW TEMPERATURE CONTROL MODULE - RYC-TAG
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-TAG

Water Flow Temperature Control Module

Accessory of RYC/T
The "RYC-TAG" Water Flow Temperature Control module has been designed to study a practical control system, through the control of water flow temperature.The "RYC-TAG" module consists of two main components: the "RYC-TAG" apparatus and the...
TEMPERATURE CONTROL MODULE - RYC-TE
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-TE

Temperature Control Module

Accessory of RYC/T
The "RYC-TE" Temperature Control module has been designed to study a practical control system, through the control of the water temperature in a tank.The "RYC-TE" module consists of two main components: the "RYC-TE" apparatus and the "RYC-TE"...
PRESSURE CONTROL MODULE - RYC-P
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-P

Pressure Control Module

Accessory of RYC/T
The "RYC-P" Pressure Control module has been designed to study a practical control system, through the control of the air pressure level of an air pressure tank.The "RYC-P" module consists of two main components: the "RYC-P" apparatus and the...
LEVEL CONTROL MODULE - RYC-N
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-N

Level Control Module

Accessory of RYC/T
The "RYC-N" Level Control module has been designed to study a practical control system, through the control of the water level of a tank.The "RYC-N" module consists of two main components: the "RYC-N" apparatus and the "RYC-N" interface box. The...
FLOW RATE CONTROL MODULE - RYC-C
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-C

Flow Rate Control Module

Accessory of RYC/T
The "RYC-C" Flow Rate Control module has been designed to study a practical control system, through the flow rate of a close water circuit.The "RYC-C" module consists of two main components: the "RYC-C" apparatus and the "RYC-C" interface box. The...
LUMINOSITY CONTROL MODULE - RYC-I
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-I

Luminosity Control Module

Accessory of RYC/T
The "RYC-I" Luminosity Control module has been designed to study a practical control system and study different light sensors, through the luminosity control with three different light sensors.The "RYC-I" module consists of two main components:...
PH CONTROL MODULE - RYC-pH
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-pH

pH Control Module

Accessory of RYC/T
The "RYC-pH" pH Control module has been designed to study a practical control system, through the pH dissolution control in a stirred tank.The "RYC-pH" module consists of two main components: "RYC-pH" apparatus and "RYC-pH" interface box. The...
POSITION CONTROL MODULE - RYC-CP
Available
6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS
RYC-CP

Position Control Module

Accessory of RYC/T
The "RYC-CP" Position Control module has been designed to study a practical control system, through the control of a linear position system.The "RYC-CP" module consists of two main components: the "RYC-CP" apparatus and the "RYC-CP" interface box....
INDUSTRIAL CONTROLLERS UNIT - CECI
  • CECI
Available
6.1.1.2.- INDUSTRIAL CONTROLLERS
CECI

Industrial Controllers Unit

The Industrial Controllers Unit, "CECI", is based on a modular design structure whose functionality is divided into different modules toallow the student a better understanding of the unit. The modules included in the unit are: industrial...
INDUSTRIAL CONTROLLERS NETWORKING - CRCI
  • CRCI
Available
6.1.1.2.- INDUSTRIAL CONTROLLERS
CRCI

Industrial Controllers Networking

The Industrial Controllers Networking, "CRCI", unit is based on a modular design structure whose functionality is divided into different modules to allow the student a better understanding of the unit. The modules provided with the unit are: two...
COMPUTER CONTROLLED CONTROLLER TUNING UNIT - CEAC
  • CEAC
Available
6.1.1.2.- INDUSTRIAL CONTROLLERS
CEAC

Computer Controlled Controller Tuning Unit

The Computer Controlled Controller Tuning Unit, "CEAC", provides the tools to simulate different industrial processes in a HIL system and control them with a commercial industrial controller. The CEAC unit works in conjunction with a computer, in...
FIELD BUS APPLICATIONS UNIT - CEAB
  • CEAB
Available
6.1.1.2.- INDUSTRIAL CONTROLLERS
CEAB

Field Bus Applications Unit

The Trainer for Field Bus Applications, "CEAB", provides the components to conform a real Profibus DP Network where the PC is the master device and different components included with the unit are the slave devices. The "CEAB" unit also allows to...
COMPUTER CONTROLLED COUPLED TANKS SYSTEM - CTAC
  • CTAC
Available
6.1.1.3.- INDUSTRIAL SYSTEM APPLICATIONS
CTAC

Computer Controlled Coupled Tanks System

The Computer Controlled Coupled Tanks System, "CTAC", consists of four transparent tanks, each with a pressure sensor to measure the water level. The coupling configuration between tanks can be modified by the use of computer controlled solenoid...
COMPUTER CONTROLLED PROCESS CONTROL (ELECTRONIC VALVE) - UCP
  • UCP
Available
6.1.1.3.- INDUSTRIAL SYSTEM APPLICATIONS
UCP

Computer Controlled Process Control (Electronic Valve)

The Computer Controlled Process Control (Electronic Valve), "UCP", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH, conductivity and...
COMPUTER CONTROLLED PROCESS CONTROL(PNEUMATIC VALVE) - UCPCN
  • UCPCN
Available
6.1.1.3.- INDUSTRIAL SYSTEM APPLICATIONS
UCPCN

Computer Controlled Process Control(Pneumatic Valve)

The Computer Controlled Process Control (Pneumatic Valve), "UCPCN", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH, conductivity and...
COMPUTER CONTROLLED PROCESS CONTROL (SPEED CONTROLLER) - UCPCV
  • UCPCV
Available
6.1.1.3.- INDUSTRIAL SYSTEM APPLICATIONS
UCPCV

Computer Controlled Process Control (Speed Controller)

The Computer Controlled Process Control Unit (Speed Controller), "UCPCV", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH,...
COMPUTER CONTROLLED INDUSTRIAL PROCESS CONTROL PLANT - CPIC
  • CPIC
Available
6.1.1.3.- INDUSTRIAL SYSTEM APPLICATIONS
CPIC

Computer Controlled Industrial Process Control Plant

The Computer Controlled Process Control Plant with Industrial Instrumentation and Service Module (Flow, Temperature, Level and Pressure),"CPIC", is a unit, that offers, on a reasonable laboratory scale, the different process and elements that are...
Ask for information