14.- 生物医学工学

生物医学工学は、生物学と医学の分野における工学的知識の応用を研究しています。電子制御・計装システムと数学的アルゴリズムと物理化学的原理の応用を組み合わせることで、バイオメディカル工学は、臨床上の問題を解決するための新しい技術や装置を研究開発することができます。この分野は、診断要素や医療用ソフトウェアツールの設計から、心臓や神経系の研究のための生理学的解析まで多岐にわたります。

もっと見る

生物医工学は、科学技術の進歩に伴い、長年にわたり発展してきました。今日では、バイタルサイン監視システムや診断装置のようなデバイスは、ヘルスケア業務を容易にします。レントゲンや超音波、磁気共鳴などの画像解析法が発達したことで、身体の状態を明確に、かつ迅速に調べることができるようになりました。また、病院管理ソフトや遠隔医療ソフトを使用しています。

今日の社会では、迅速かつ効率的な医療ソリューションが求められており、バイオメディカルエンジニアリングの未来は、幅広い発展の道筋をたどっています。日常的に使用されている電子機器は、健康問題の前に症状を分析し、可能性のある問題を予防するために、バイタルサインの値に続いて、患者の遠隔監視を可能にします。バイオメディカルエンジニアリングのもう一つのトレンドは、実験器具の簡素化である。LOC(Lab On a Chip)のようなシステムは、実験室の機能を1つのチップに統合します。新しいロボット手術技術、人工組織や再生組織の製造のための新しい有機材料、あるいは人工臓器の3Dプリントなど、将来の医療ニーズを解決することが可能になります。

製品を見る
関連資料
生物医学工学 SUBCATEGORIES

14.1.- 生体力学

バイオメカニクスは、人体の動きをはじめとする生物の生体の動きの力学を研究しています。この研究では、仕事やスポーツなどの日常生活の中で最も単純な動きから、心臓などの内臓の動きまで幅広く研究しています。人体の運動学を研究するために、バイオメカニクスは、力学の原理と解剖学と生理学の知識を応用して、新しい診断・治療機器の設計や、より良い補綴物やインプラントの設計を可能にします。現在、バイオメカニクスでは、関節と筋肉を組み合わせた様々な動きを分析しています。これらの解析により、人体が受ける荷重や応力を調べることができます。人間の運動学の知識は、怪我の治療とその後のリハビリテーション、柔軟な動きを可...
ほら

14.2.- 医用生体工学

生物医学工学は、生物学と医学の分野における工学的知識の応用を研究しています。この工学の中で最も関連性の高い分野の一つがバイオメディカル・エレクトロニクスであり、電子工学の概念を医療機器の開発に応用しています。現在では、医療の現場で開発されたプロセスの多くは、電子工学のサポートが必要となり、あるニーズを解決することができるようになりました。抵抗、コイル、コンデンサなどの基本的な電子素子の組み合わせから、より複雑な信号処理回路、アナログ/デジタル変換(A/D)、電磁波放射など、生体から情報を取得したり、医療に応用したりすることができるデバイスを設計することができます。また、PIDレギュレータ...
ほら

14.3.- 生物医学機器

バイオメディカル機器とは、医学、生物学、医薬品の分野で使用される機器のセットのことです。バイオメディカル機器の設計は、情報を取得したり、治療を行ったり、化学的・生物学的プロセスを実行したりするために設計された機器であるバイオメディカル機器の設計に直結しています。医療技術の分野では、医療機器とは、医療・手術、診断、治療、リハビリテーションを目的とした機器のことである。この装置の目的は、バイタルサインの制御、呼吸制御およびスピロメトリーまたは電気外科などの臨床プロセスの自動化である。また、マイクロ波や超音波、磁気治療などの新しい治療法を応用しています。また、試料の分析、細菌培養、凍結乾燥によ...
ほら
生物医学工学 UNITS
61-90 を表示中 合計 181 商品
DYNAMIC FRICTION OF A CYLINDER ON A ROLLER - MEMT-2
Available
7.1.5.- 摩擦 (摩擦、 摩耗、 潤滑)
MEMT-2
リング摩擦ブロックモジュール
の付属品 MEMT
This unit allows to demonstrate the friction forces between several cylinders of different materials and a roller under different lubrication conditions.The "MEMT-2" unit consists of two levers that transmit a force applied by weights to a test...
DYNAMIC FRICTION OF A PIN ON A DISC - MEMT-3
Available
7.1.5.- 摩擦 (摩擦、 摩耗、 潤滑)
MEMT-3
ディスクピンモジュール
の付属品 MEMT
This unit allows to study the friction forces between several vertical friction pins of different materials and a rotating friction disc.The end of each vertical pin is made of a different material and rubs against the rotating steel disc. The...
ELASTOHYDRODYNAMIC LUBRICATION - MEMT-5
Available
7.1.5.- 摩擦 (摩擦、 摩耗、 潤滑)
MEMT-5
光学流体弾性力学モジュール
の付属品 MEMT
This unit allows to investigate the thickness and characteristics of a lubricant film on a rolling sphere.The unit consists in a steel sphere and a driven glass disc.The sphere is pressed against the underside of the glass disc. The light from a...
FRICTION VIBRATION - MEMT-6
Available
7.1.5.- 摩擦 (摩擦、 摩耗、 潤滑)
MEMT-6
Friction Vibration
の付属品 MEMT
This module allows to demonstrate the static friction, the sliding friction, the related friction vibrations and the slip-stick effects.Several weights are placed on a horizontally rotating friction disc. It is prevented from turning by a cord....
THIN CYLINDER UNIT - MCD
  • MCD
Available
7.1.5.- 摩擦 (摩擦、 摩耗、 潤滑)
MCD
肉薄シリンダー実験装置
The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...
UNIT FOR STUDYING BEARING FRICTION - MBF
  • MBF
Available
7.1.5.- 摩擦 (摩擦、 摩耗、 潤滑)
MBF
Unit for Studying Bearing Friction
The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...
BELT FRICTION UNIT WITH DYNAMOMETERS - MCF/A
  • MCF/A
Available
7.1.5.- 摩擦 (摩擦、 摩耗、 潤滑)
MCF/A
Belt Friction Unit with Dynamometers
The Belt Friction Unit with Dynamometers, "MCF/A", allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.With this unit it is possible to observe the relationship between...
THICK WALLED CYLINDER UNIT - MCPG
  • MCPG
Available
7.1.6.- 構造メカニズム
MCPG
Thick Walled Cylinder Unit
In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...
UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG
  • MFPG
Available
7.1.6.- 構造メカニズム
MFPG
ジブクレーンフォース測定実験装置
The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...
SUSPENSION BRIDGE UNIT - MVS
  • MVS
Available
7.1.6.- 構造メカニズム
MVS
サスペンションブリッジ実験装置
The Suspension Bridge Unit, "MVS", consists of a deck and two parallel main cables that simulate a suspension bridge and allow the study of stress in the main cables. The deck of the bridge is simulated by a light alloy beam that is held by both...
PARABOLIC ARCH UNIT - MARP
  • MARP
Available
7.1.6.- 構造メカニズム
MARP
パラボラアーチ実験装置
The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.One support of the arch is fixed whereas the...
THREE-HINGED ARCH UNIT - MART
  • MART
Available
7.1.6.- 構造メカニズム
MART
3ヒンジアーチ実験装置
The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...
UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3
  • MFCS3
Available
7.1.6.- 構造メカニズム
MFCS3
トラスひずみ測定実験装置
The Unit for studying Deformation of Trusses, "MFCS3", allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the experimental forces in the...
TWO HINGED ARCH UNIT - MFL
  • MFL
Available
7.1.6.- 構造メカニズム
MFL
2ピンアーチ実験装置
The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...
PORTAL FRAME UNIT - MPO
  • MPO
Available
7.1.6.- 構造メカニズム
MPO
ポータルフレーム実験装置
The Portal Frame Unit, "MPO", allows to perform vertical deflection and horizontal deflection measurements in a fixed rectangular portal frames.To carry out the deflection tests, a series of loads with different weight must be applied to the...
STRESS HYPOTHESES UNIT - STH
  • STH
Available
7.1.6.- 構造メカニズム
STH
Stress Hypotheses Unit
The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...
SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE
  • MEPE
Available
7.1.6.- 構造メカニズム
MEPE
単純安定性課題分析実験装置
The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...
UNIT FOR STUDYING METHODS TO DETERMINE THE ELASTIC LINE - MDLE
  • MDLE
Available
7.1.6.- 構造メカニズム
MDLE
弾性ライン測定分析実験装置
The Unit for studying Methods to Determine the Elastic Line, "MDLE", consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys, dial gauges and a set...
UNIT TO STUDY STRESS ON A MEMBRANE - SSM
  • SSM
Available
7.1.6.- 構造メカニズム
SSM
Unit to Study Stress on a Membrane
The Unit to Study Stress on a Membrane, "SSM", designed by EDIBON, allows the study of stresses and deformations in a thin disc or membrane subjected to different compressive stresses.The main element of the equipment is a thin disc or membrane...
UNSYMMETRICAL CANTILEVER UNIT - MVV
  • MVV
Available
7.1.6.- 構造メカニズム
MVV
非対称カンチレバー実験装置
The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...
DEFLECTION OF CURVED BARS UNIT - MDB
  • MDB
Available
7.3.2.1.- 機械的試験
MDB
湾曲棒たわみ実験装置
The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- 機械的試験
MFV
梁たわみ実験装置
The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- 機械的試験
MFLT
棒鋼の座屈を研究する機械
The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
リクエスト情報