9.10.- インストールとメンテナンス

現代社会のニーズは、それに適応するために進化と改修を続けていかなければならないため、どの業界にとっても課題となっています。

もっと見る

近年、新しい産業革命や「インダストリー4.0」、「モノのインターネット」(IIoT)や「スマートファクトリー」の出現により、既存のものを改修する際の新しい設備の設計における最も洗練された技術の応用により、これらのニーズに対応することが可能になりました。

これらすべての技術的進歩と徹底した管理にもかかわらず、生産プロセスに関わるすべての要素が機械的・電気的な摩耗(努力、負荷など)を受け、その耐用年数が限られていることを忘れてはなりません。致命的な故障、生産停止、または非生産的な時間の増加を意味するあらゆる種類のプロセスを避けるために、機械、電気システムなどの良好なメンテナンスを実施することが非常に重要です。

従来は2種類のメンテナンスしか考えられていませんでした。

  • 矯正: それは失敗が既に起こったときにそれを解決することから成っています。
  • 予防的: それはすべてのそれらの問題のある要素の周期的な修正から成り、これが考えられていたらそれらを取り替えるために。

これらのタイプのメンテナンスは、ほとんどの場合、非常に高額で不要なコストがかかることを暗示しています。現在では、利用可能な技術のおかげで、システムのすべてのコンポーネントに関わるすべての変数を網羅的に分析し、適切なタイミングでそれらを交換することで構成される予知保全を実施することが可能になりました。

しかし、あなたが摩耗の対象となるすべてのそれらの機械部品を被ることができます障害をより大きく制御したい場合は、問題の根源を探して、予測を超えて一歩を行くことで構成されているプロアクティブメンテナンスとして知られているメンテナンスの別のタイプがあります。

製品を見る
インストールとメンテナンス UNITS
1-30 を表示中 合計 37 商品
UNIT TO STUDY A FILTER DRIER  CUTAWAY MODEL - DFCM
  • DFCM
Available
9.10.1.- クションモデル
DFCM
Unit to Study a Filter Drier Cutaway Model
The Unit to Study a Filter Drier Cutaway Model, "DFCM", allows the students to visualize the inner parts of a (element), to evaluate the relation with each other accurately and to understand their functionThe cutaway model of a filter drier is...
UNIT TO STUDY A GAS METER CUTAWAY MODEL - GMCM
  • GMCM
Available
9.10.1.- クションモデル
GMCM
Unit to Study a Gas Meter Cutaway Model
The Unit to Study a Gas Meter Cutaway Model, "GMCM", allows the students to visualize the inner parts of a gas meter, to evaluate the relation with each other accurately and to understand their function.It is a measurement device to determine the...
UNIT TO STUDY A LIQUID SEPARATOR CUTAWAY MODEL - LSCM
  • LSCM
Available
9.10.1.- クションモデル
LSCM
Unit to Study a Liquid Separator Cutaway Model
The Unit to Study a Liquid Separator Cutaway Model, "LSCM", allows the students to visualize the inner parts of a liquid separator, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a liquid...
INTRODUCTION TO REFRIGERATION UNIT - TIR
  • TIR
Available
9.10.3.- 設置および保守の慣行
TIR
Introduction to Refrigeration Unit
The Introduction to Refrigeration Unit, "TIR", is a system with exchangeable modules in which the components are mounted on plates and quickly connected by flexible hoses. The unit consists of a frame with a compressor, a refrigerant accumulator...
TEMPERATURE MEASUREMENT TRAINING UNIT - TEMT
  • TEMT
Available
9.10.3.- 設置および保守の慣行
TEMT
温度測定演習装置
The Temperature Measurement Training Unit, "TEMT", allows to compare the response of several devices to measure the temperature for different flows and different installation position of these devices.The unit includes four different measuring...
HOME REFRIGERATION MODEL - TRAMC/1
Available
9.10.3.- 設置および保守の慣行
TRAMC/1
Home refrigeration model
の付属品 TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below. The models are interconnected by special refrigerant hoses. The main components of the TRAMC Unit...
COMPLETE AIR CONDITIONING SYSTEM MODEL - TRAMC/4
Available
9.10.3.- 設置および保守の慣行
TRAMC/4
Complete Air Conditioning System Model
の付属品 TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below. The models are interconnected by special refrigerant hoses. The main components of the TRAMC Unit...
MEASUREMENT AND REGULATION STATION TRAINER - MRST
  • MRST
Available
9.10.3.- 設置および保守の慣行
MRST
Measurement and Regulation Station Trainer
The Measurement and Regulation Station Trainer,"MRST", designed by EDIBON is a totally accessible bench-top unit. The unit works with an air compressor that simulates the gas flowing inside the pipes (air testing), allowing to check the tightness...
INSTANTANEOUS GAS HEATER TRAINER - IGHT
  • IGHT
Available
9.10.3.- 設置および保守の慣行
IGHT
Instantaneous Gas Heater Trainer
The Instantaneous Gas Heater Trainer, ,IGHT,, designed by EDIBON, is a training unit with wheels to facilitate its mobility that represents a gas heater training system. The unit operates with air, simulating the operation of the heater, so it can...
FORCED AIR GAS BURNER TRAINER - GBT
  • GBT
Available
9.10.3.- 設置および保守の慣行
GBT
Forced Air Gas Burner Trainer
The Forced Air Gas Burner Trainer, "GBT", designed by EDIBON, is a compact teaching unit with wheels to facilitate its mobility. It represents a controlled gas system that supplies a forced air gas burner. It allows the study of the arrangement,...
GAS HOME SUPPLY TRAINER - GHST
  • GHST
Available
9.10.3.- 設置および保守の慣行
GHST
Gas Home Supply Trainer
The Gas Home Supply Trainer, ,GHST,, designed by EDIBON, consists of a teaching unit where the elements normally used on any domestic gas installation are arranged on the front panel of the unit as in a real installation. The unit works with air,...
ELECTRICAL FAULTS IN AIR CONDITIONING SYSTEMS UNIT - TEFA
  • TEFA
Available
9.10.3.- 設置および保守の慣行
TEFA
Electrical Faults in Air Conditioning Systems Unit
The Electrical Faults in Air Conditioning Systems Unit,"TEFA", is designed in a simple way in order to transmit comprehensible knowledge about how identify electrical faults in air conditioning systems. For this purpose, concepts are included to...
HYDRONIC BALANCING TRAINING UNIT - THBT
  • THBT
Available
9.10.3.- 設置および保守の慣行
THBT
Hydronic Balancing Training Unit
The Hydronic Balancing Training Unit, "THBT", has been designed to study the amount of water that guarantees enough provision of hot water to all the radiators in a system. The hydronic balancing is performed with lockshield valves, which block...
RADIATORS TRAINING UNIT - RT
  • RT
Available
9.10.3.- 設置および保守の慣行
RT
Radiators Training Unit
The Radiators Training Unit, "RT", has been designed to study hot water heating systems. These systems are called that way because they use water as working fluid between the generation system, usually a boiler, and the emitters, such as...
HEATING SYSTEM TRAINING UNIT - THST
  • THST
Available
9.10.3.- 設置および保守の慣行
THST
Heating System Training Unit
The Heating System Training Unit, "THST", has been designed to study central heating systems. The unit simulates a central heating system. For that purpose, it is made up of four radiators with a thermostatic valve each. This valve controls the...
THREE-WAY MIXING VALVE TRAINING UNIT - TEV3V
  • TEV3V
Available
9.10.3.- 設置および保守の慣行
TEV3V
スリーウェイ混合バルブ演習装置
The Three-Way Mixing Valve Training Unit, "TEV3V", allows to demonstrate the function of a three-way mixing valve in a hot water heating system. The three-way mixing valve in the heating system regulates the supply water temperature to a heating...
FOUR-WAY MIXING VALVE TRAINING UNIT - TEV4V
  • TEV4V
Available
9.10.3.- 設置および保守の慣行
TEV4V
フォーウェイ混合バルブ演習装置
The Four-Way Mixing Valve Training Unit, "TEV4V", allows to demonstrate the function of a four-way mixing valve in a hot water heating system. The four-way mixing valve in the heating system regulates the circulation and feed flow temperatures of...
SANITARY FITTINGS TRAINING UNIT - TEIS
  • TEIS
Available
9.10.3.- 設置および保守の慣行
TEIS
衛生設備フィッティング演習装置
The Sanitary Fittings Training Unit, "TEIS", has been designed by EDIBON for training in the plumbing sector. It consists of an anodized aluminum frame and panels in painted steel in which tests can be carried out with the most common systems of...
リクエスト情報