8.8.- 流体配管システム

エンジニアリングでは、流体ラインは、流体の供給源から必要な目的地への輸送を可能にする構造または作業として定義されています。伝導には、閉じたもの(パイプ、トンネル、下水道)と開いたもの(自然流)の2種類があります。閉じたパイプ内の流れは、自由表面を持つものとは異なり、一般的に圧力がかかります。

もっと見る

パイプラインは様々な作品で使われているので、それに合わせたものにしなければなりません。この目的のために、それらには部品があり、導通ラインの主なものは、パイプと部品(ジョイント、エルボ、リデューサ、バルブなど)である。さらに、設計仕様や作業の要件に応じて、配管はポンプシステムにより、重力またはその両方のメカニズムで流体を輸送することができます。同時に、厚手の固体が存在する可能性があることや、流体の研磨性など、他の特性を考慮して材料を研究することが重要です。

パイプラインの最も明確な例は、飲料水の配水・供給ネットワークに見られる。安全性や衛生面を保証しなければならない人間の水消費施設は、タンクや配管、付属品など様々な要素で構成されています。その他の例としては、排水や雨水を避難させるための配管、再利用水を利用した灌漑ネットワーク、建物内の雨水管理用の配管などがあります。

製品を見る
流体配管システム UNITS
1-15 を表示中 合計 15 商品
FLUID FRICTION IN PIPES UNIT - AFT/P
  • AFT/P
Available
8.8.- 流体配管システム
AFT/P
導管内流体摩擦実験装置
The Fluid Friction in Pipes Unit, "AFT/P", is designed to determine the friction coefficient in pipes, to study the pressure losses in different types of valves and different fittings and to compare different methods to measure the flow.This unit...
MESH IN PIPE UNIT - AMT/P
  • AMT/P
Available
8.8.- 流体配管システム
AMT/P
Mesh in Pipe Unit
The Mesh in Pipe Unit, "AMT/P", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to work autonomously.The valves that...
COMPUTER CONTROLLED WATER HAMMER UNIT - EGAC
  • EGAC
Available
8.8.- 流体配管システム
EGAC
コンピューター制御水撃実験装置
The Computer Controlled Water Hammer Unit, "EGAC", is designed to demonstrate the effects of an instantaneous variation of the speed of a fluid. It is possible to study the water hammer, which is the consequence of a quick change in a fluid speed....
AIR FLOW STUDIES UNIT - HECA
  • HECA
Available
8.8.- 流体配管システム
HECA
気流学習実験装置
The Air Flow Studies Unit, "HECA", is a floor standing unit that allows to measure different characteristics of air distribution systems and to demonstrate certain basic principles of fluid mechanics in ducts and jets.The unit is mounted on a...
リクエスト情報