7.4.3.- 設置および保守の慣行

設置および保守の慣行 UNITS
1-23 を表示中 合計 23 商品
COMPUTER CONTROLLED MACHINE DIAGNOSIS UNIT - MDUC
  • MDUC
Available
7.4.3.- 設置および保守の慣行
MDUC
コンピュータ制御の機械診断装置
The Computer Controlled Machine Diagnosis Unit, "MDUC", of EDIBON, allows you to perform vibration measurement practical exercises, measuring the displacement, velocity and acceleration of vibrations in the time-frequency range.The Computer...
MACHINE DIAGNOSIS - MDU
  • MDU
Available
7.4.3.- 設置および保守の慣行
MDU
機械診断
The family of Machine Diagnosis Unit, "MDU", of Edibon, allows you to perform vibration measurement practical exercises, measuring the displacement, velocity and acceleration of vibrations in the time-frequency range.The MDU Base Unit, "MDU-UB",...
MOBILE STRUCTURE FOR MDU - MDU-MLB
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-MLB
MDU機器の移動構造
の付属品 MDU
The Mobile Structure for MDU, "MDU-MLB", is a robust structure designed to quickly and easily assemble the various elements of the MDU Base Unit, "MDU-UB" or the Computer Controlled Machine Diagnosis Unit, "MDUC", and thus assemble a mobile test...
TOP TABLE STRUCTURE FOR MDU - MDU-SM
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SM
MDU機器のデスクトップ構造
の付属品 MDU
A bench-top structure consisting of a slotted table with anodized aluminum frames of 1100 x 770 x 820 mm.It has a transparent protective cover that protects against the rotating parts and allows us to observe the different experiments. The cover...
BREAK AND LOAD UNIT - MDU-BLU
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-BLU
ブレーキと負荷装置
の付属品 MDU
The Break and Load Unit, "MDU-BLU", of EDIBON is a magnetic particle brake, a display unit and an electrical control. It is possible to precisely adjust the braking moment. The excitation current is used as a measurement of the braking moment and...
SET OF ELASTIC SHAFT - MDU-SES
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SES
弾性ツリーセット
の付属品 MDU
The Set of Elastic Shaft, "MDU-SES", of EDIBON allows to study the behavior of an elastic rotor subjected to imbalance and balance of elastic rotors in operation. It is possible to study the resonance and the phenomena occurred in subcritical and...
SET OF ROTATING SHAFT WITH CRANK - MDU-SRS
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SRS
クラック入り軸セット
の付属品 MDU
It is important that fissures resulting from material fatigue in rotating machines are detected in good time before the breakage occurs, which usually leads to fatal consequences.The Set of Rotating Shaft with Crank, "MDU-SRS", consists of two...
SET OF ROLLER BEARINGS WITH FAULTS - MDU-SRBF
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SRBF
ベアリング欠陥セット
の付属品 MDU
To determine the remaining life cycle of a roller bearing and decide on its replacement, the slow variation of the vibration spectrum is analyzed. The spectral distribution will enable to draw accurate conclusions about the type of defect and its...
SET OF COUPLINGS - MDU-SCO
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SCO
カップリングセット
の付属品 MDU
The Set of Couplings, "MDU-SCO", allows to compare the properties of different couplings such as curved tooth, bolt, flange and claw couplings.The vibrational behavior of the different types of couplings is important to draw conclusions about...
SET OF BELT DRIVE - MDU-SBD
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SBD
ベルトトランスミッションセット
の付属品 MDU
The belt drives are noiseless drive devices, have a long life and require little maintenance provided that its design, assembly and adjustment are correct.The Set of Belt Drive, "MDU-SBD", allows to study the conditions that cause vibrations or...
SET TO STUDY DAMAGE IN GEARS - MDU-SSDG
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SSDG
ギア欠陥セット
の付属品 MDU
The Set to Study Damage in Gears, "MDU-SSDG", allows to study the vibrational behavior of gears with typical defects.For that purpose, gears with tooth defects and gears without defects are included, so a comparative study can be carried out. The...
SET OF CRANK MECHANISM - MDU-SCM
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SCM
クランク機構セット
の付属品 MDU
The compressors and pumps frequently use crank and connecting rod mechanisms. The force and mass oscillations cause vibrations in the units.The Set of Crank Mechanism, "MDU-SCM", allows to adjust the stroke, mass compensation and bearing...
SET TO STUDY CAVITATION IN PUMPS - MDU-SSCP
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SSCP
ポンプキャビテーションセット
の付属品 MDU
Pump cavitation is produced when steam cavities are created within a fluid in which forces act responding to the pressure differences.Cavitation causes noise, damage to components and loss of performance.The Set to Study Cavitation in Pumps,...
BLOWER VIBRATION SET FOR MDU - MDU-SSVF
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SSVF
MDUブロワ振動セット
の付属品 MDU
In the Blower Vibration Set for MDU, "MDU-SSVF", the vibrations are magnetically induced. It is possible to study three impellers with a different number of movable vanes. It is also possible to study the gyroscopic effect by mounting the flywheel...
SET OF ELECTROMECHANICAL VIBRATIONS - MDU-SEV
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SEV
電機振動セット
の付属品 MDU
Among the drive systems are the asynchronous motors, which generate vibrations in machines.This is the case with an asymmetric air gap (space between rotor and stator), in which the magnetic vibrational forces induce torsional and bending...
DISPLACEMENT SENSORS FOR MDU UNIT - MDU-SD
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SD
MDU機器の変位センサー
の付属品 MDU
Two displacement sensors which, together with the Set of Elastic Shaft ,"MDU-SES", and the Software, Sensors and Control for MDU Unit, "MDU-SSC", allow you to represent subcritical and supercritical shaft orbits in resonance.
SCREW JOINT TESTING UNIT - MSCT
  • MSCT
Available
7.4.3.- 設置および保守の慣行
MSCT
Screw Joint Testing Unit
The Screw Joint Testing Unit, "MSCT", represents the simulation of a tightening set consisting of a screw and a nut on two rectangular shaped beams. A very precise torque wrench performs the tightening through a threaded rod and a flywheel. The...
UNIT TO STUDY LATHE GEARS - MSLG
  • MSLG
Available
7.4.3.- 設置および保守の慣行
MSLG
Unit to Study Lathe Gears
The Unit to Study Lathe Gears, "MSLG", represents the gears of a typical lathe in a machining workshop, including: a main adjustable transmission gear, one Norton gearbox for the machining of specific threads and pitches, a pinion switching gear...
BASIC UNIT OF MECHANICAL DRIVE SYSTEMS - MDSU
  • MDSU
Available
7.4.3.- 設置および保守の慣行
MDSU
Basic Unit of Mechanical Drive Systems
The Basic Unit of Mechanical Drive Systems, "MDSU", consists of a main frame where a series of accessories and elements are arranged, distributed in modules of different level, thought to introduce the user in the field of mechanical systems and...
RIGGING TRAINING UNIT - RGT
  • RGT
Available
7.4.3.- 設置および保守の慣行
RGT
Rigging Training Unit
The Rigging Training Unit, "RGT", has been designed for the study of techniques to move loads of various shapes, sizes and types safely. The unit consists of an adjustable height gantry frame made of welded steel and beam attachment points. The...
リクエスト情報