9.1.- 熱力学の基礎と基本概念

熱力学は、モデル化されていない実在のシステムを実験的手法で研究する現象学の中の物理学の一分野です。その結果、それらは近似と変数の測定によって実験的に定義されています。

もっと見る

マクロ的には、熱力学系は変数によって定義される。熱力学的変数を多数測定することができますが、システムを一意に決定するためには、状態関数である1つの数値だけが必要です。圧力、体積、温度、エントロピー、エンタルピーは最も重要な状態変数の一つです。

熱力学的変数の変更に伴い、物質の集合状態の変化が起こる。凝集の基本的な状態は固体、液体、気体であり、それぞれの元素や化合物には、状態変化が起こる圧力や温度の条件があります。

実際の熱力学系とその状態変化を単純化するために、理想的なガスモデルの概念が導入されました。それらは理想気体の方程式で定義されています。同様に、理想的な非圧縮性液体に近似します。

液体を含む閉系では、液体とその気相の間に熱力学的なバランスが存在します。平衡状態にある系の圧力と温度の進化が蒸気圧の曲線を定義し、既存の状態を飽和状態と呼ぶ。この進化から、温度-圧力線図が表現されます。

これらの概念の研究は、水に基本的に適用され、実際には非常に重要です。例えば、理想的な水分レベル、物質の収縮と膨張の仕様は、その後、タービン、ノズル、蒸気機関などの実際の熱機械に適用され、運転状態を評価するために使用されます。

製品を見る
熱力学の基礎と基本概念 UNITS
1-18 を表示中 合計 18 商品
COMPUTER CONTROLLED COMBUSTION LABORATORY UNIT - TVCC
  • TVCC
Available
9.1.- 熱力学の基礎と基本概念
TVCC
コンピューター制御燃焼実験室装置
The Computer Controlled Combustion Laboratory Unit, "TVCC", unit is mounted on a metallic frame that enables safe access to the equipment and an easy handling and access to the burner, combustion chamber and all the accessories and control panels....
THERMAL EXPANSION TRAINING UNIT - TEDT
  • TEDT
Available
9.5.- 熱油圧配管システム
TEDT
熱拡散演習装置
The Thermal Expansion Training Unit, "TEDT", allows to study the thermal expansion of different pipe sections and the thermal expansion force. It comprises original components as used in heating and sanitation systems. This unit provides...
BOMB CALORIMETER - TBCF
  • TBCF
Available
9.1.- 熱力学の基礎と基本概念
TBCF
燃料発熱量試験用ボンベ熱量計
Bomb Calorimeter, "TBCF", comprises the calorimeter, a calorimeter vessel, an outer double walled water jacket, control unit to switch on/off the stirrer and the ignition device, an accurate thermometer and charging unit with pressure gauges to...
COMPUTER CONTROLLED SEPARATING AND THROTTLING CALORIMETER - TCESC
  • TCESC
Available
9.1.- 熱力学の基礎と基本概念
TCESC
コンピューター制御分離・調整熱量計
The Computer Controlled Separating and Throttling Calorimeter, "TCESC", has been designed to determine the steam humidity content and the dryness fraction of steam.This unit works with steam. The steam is introduced into the line by means of a...
COMPUTER CONTROLLED TEMPERATURE MEASUREMENT UNIT - TMTC
  • TMTC
Available
9.1.- 熱力学の基礎と基本概念
TMTC
Computer Controlled Temperature Measurement Unit
The Computer Controlled Temperature Measurement Unit, "TMTC", works as a temperature meter that uses different temperatures measuring devices to compare, check and analyze the temperature and how is the precision for the measure and for the device...
TEMPERATURE MEASUREMENT UNIT - TMT
  • TMT
Available
9.1.- 熱力学の基礎と基本概念
TMT
温度測定装置
The Temperature Measurement Unit, "TMT", works as a temperature meter that uses different temperatures measuring devices to compare, check and analyze the temperature and how is the precision for the measure and for the device that the student has...
TEMPERATURE MEASUREMENT TRAINING UNIT - TEMT
  • TEMT
Available
9.10.3.- 設置および保守の慣行
TEMT
温度測定演習装置
The Temperature Measurement Training Unit, "TEMT", allows to compare the response of several devices to measure the temperature for different flows and different installation position of these devices.The unit includes four different measuring...
RECYCLE LOOPS UNIT - TRLB
  • TRLB
Available
9.1.- 熱力学の基礎と基本概念
TRLB
循環ループ実験装置
The Recycle Loops Unit, "TRLB", has been designed to demonstrate, both visually and experimentally, what a recycle loop is and how itworks. It has many teaching applications, among them the performance of mass and energy balances under stable and...
AIR HUMIDITY MEASUREMENT UNIT - TMHA
  • TMHA
Available
9.2.- 暖房、 換気、 空調、 温水
TMHA
大気湿度測定実験装置
The Air Humidity Measurement Unit, "TMHA", enables the differences in accuracy between different instruments to measure the air relative humidity. It also includes a fan to show the effects of airflow on the different instruments. A mobile...
NOZZLE PRESSURE DISTRIBUTION UNIT - TPT
  • TPT
Available
9.1.- 熱力学の基礎と基本概念
TPT
ノズル圧配置実験装置
The Nozzle Pressure Distribution Unit, "TPT", allows to investigate the pressure distribution and the mass flow rate in nozzles (convergentdivergent and convergent nozzles).The unit includes three types of nozzles:Convergent type (conical) nozzle,...
リクエスト情報