7.1.2.- シンプルなマシン

シンプルなマシン UNITS
1-22 を表示中 合計 22 商品
SLIDER CRANK MECHANISM - MBD
  • MBD
Available
7.1.2.1.- メカニズム
MBD
スライダークランク機構
The Slider Crank Mechanism, "MBD", designed by EDIBON, is an example of slider-crank mechanism.This mechanism is made of aluminum and consists of a rotary element (graduated disc), called crank, connected to a rigid bar, calledconnecting rod. When...
SCOTCH YOKE MECHANISM - MYE
  • MYE
Available
7.1.2.1.- メカニズム
MYE
スコッチヨーク機構
The Scotch Yoke Mechanism, "MYE", designed by EDIBON, is an example of slider-crank mechanism for converting the linear motion of a slider into rotational motion or vice versa.It is made of aluminum and consists of a rotary element, called crank,...
SLOTTED LINK MECHANISM - MBM1
  • MBM1
Available
7.1.2.1.- メカニズム
MBM1
スロット連結機構
The Slotted Link Mechanism, "MBM1", is an example of a quick-return mechanism, capable of transforming circular motion into reciprocating motion. It is made of aluminum and consists of a rotary element (graduated disk), called crank, connected to...
FOUR-BAR MECHANISM - MCA
  • MCA
Available
7.1.2.1.- メカニズム
MCA
4節回転連鎖機構
The Four-Bar Mechanism, "MCA", designed by EDIBON, is a bench-top unit to perform laboratory experiments.It is made of anodized aluminum and consists of two rotary elements (graduated discs) mounted on ball bearings. The discs include a scale to...
GENEVA STOP MECHANISM - MME
  • MME
Available
7.1.2.1.- メカニズム
MME
ゼネバ式巻き止め機構
The Geneva Stop Mechanism, "MME", designed by EDIBON, is a mechanism that transforms continuous circular motion into intermittent motion. It is a positive drive in which the driven wheel is positively moved or locked.It is made of aluminum and...
COUPLING MECHANISM - MAC
  • MAC
Available
7.1.2.1.- メカニズム
MAC
カップリング機構
The Coupling Mechanism, "MAC", represents a simple Oldham type coupling. The lateral displacement of the input and output shafts may be varied and circular scales are fitted to the input and output flanges.It consists of two outer discs made of...
HOOKE'S JOINT MECHANISM - MUN
  • MUN
Available
7.1.2.1.- メカニズム
MUN
フック継手機構
The Hooke’s Joint Mechanism, "MUN", designed by EDIBON, represents a universal coupling, also called a U-joint, Hooke joint or cardan joint. The Hooke joint is a universal mechanism that is often used to transmit rotary motion between two...
CAM AND FOLLOWER MECHANISM - MEX
  • MEX
Available
7.1.2.1.- メカニズム
MEX
カム・従動機構
The Cam and Follower Mechanism, "MEX", allows to study the cam-follower and eccentric-follower mechanisms. For that purpose, several plate cam models in different forms, one eccentric and several roller-shaped, flat-shaped, wedge-shaped and...
CRANK MECHANISM - MBI
  • MBI
Available
7.1.2.1.- メカニズム
MBI
クランク機構
The Crank Mechanism "MBI", is a unit designed to observe, study and record the motion of a crank and the forces involved in a simple engine mechanism. The piston is linearly displaced through a cylinder with the aid of a guide.Bearings are coupled...
ACKERMANN STEERING MECHANISM - MDA
  • MDA
Available
7.1.2.1.- メカニズム
MDA
アッカーマンステアリング機構
The Ackermann Steering Mechanism, "MDA", is a bench-mounted unit designed to determine the lead angle of a steering trapezoid in an Ackermann steering mechanism, the disadvantages of incorrectly adjusted track rods and the influence of the track...
WINCH MECHANISM - MMEL
  • MMEL
Available
7.1.2.1.- メカニズム
MMEL
ウィンチ機構
The Winch Mechanism, "MMEL", allows to study the lifting velocity and load transmission of a winch. Efficiency and load transmission can be determined by force balance.The unit consists of a gear transmission mechanism. One gear is the input gear...
BAR LINKAGES UNIT - MBLU
  • MBLU
Available
7.1.2.1.- メカニズム
MBLU
Bar Linkages Unit
The Bar Linkages Unit "MBLU" allows many experiments using different arrangements of their parts.The "MBLU" unit includes a selection of more than twenty perforated bars of different lengths and pivots or "joints" to allow students to configure...
WORM AND WHEEL UNIT - MTSF
  • MTSF
Available
14.1.2.2.- ギア
MTSF
ワーム&ホイール実験装置
The Worm and Wheel Unit, "MTSF", allows to demonstrate the principle of a worm gear.The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel.The worm and wheel are positioned a set distance...
ACCELERATION OF GEARED SYSTEM UNIT - MAE
  • MAE
Available
14.1.2.2.- ギア
MAE
ギアシステム加速実験装置
The Acceleration of Geared Systems Unit "MAE" allows to perform tests to calculate the moment of inertia of a gear train system.The MAE unit includes six gears. Two of them can have another position in the shafts to vary the gear ratio, allowing...
GEAR GENERATION UNIT - MGE
  • MGE
Available
14.1.2.2.- ギア
MGE
ギアジェネレーション実験装置
The Gear Generation Unit, "MGE", has been designed by EDIBON to study rack and pinion systems. With this unit the student can draw by an easy procedure the profile of a tooth, produced by the involute process of the rack when passing over the...
GEARED LIFTING UNIT - MEE
  • MEE
Available
14.1.2.2.- ギア
MEE
ギアリフティングマシン
The Geared Lifting Unit, "MEE", has been designed to study a simple lifting mechanism and its use to determine the speed ratio, its mechanical advantages and efficiency.The unit is mounted on a metal structure with bearings that support the gear...
GEARED STUDY - MESE-T
  • MESE-T
Available
7.1.2.2.- ギア
MESE-T
Geared Study
The Geared Study Drive Unit, "MESE", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission.For the...
UNIT FOR THE KINEMATIC STUDY OF GEAR TRAINS - KSGT
  • KSGT
Available
7.1.2.2.- ギア
KSGT
Unit for the Kinematic Study of Gear Trains
The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study.The cogwheels may be assembled on the axles in...
リクエスト情報