14.- 生物医学工学

生物医学工学は、生物学と医学の分野における工学的知識の応用を研究しています。電子制御・計装システムと数学的アルゴリズムと物理化学的原理の応用を組み合わせることで、バイオメディカル工学は、臨床上の問題を解決するための新しい技術や装置を研究開発することができます。この分野は、診断要素や医療用ソフトウェアツールの設計から、心臓や神経系の研究のための生理学的解析まで多岐にわたります。

もっと見る

生物医工学は、科学技術の進歩に伴い、長年にわたり発展してきました。今日では、バイタルサイン監視システムや診断装置のようなデバイスは、ヘルスケア業務を容易にします。レントゲンや超音波、磁気共鳴などの画像解析法が発達したことで、身体の状態を明確に、かつ迅速に調べることができるようになりました。また、病院管理ソフトや遠隔医療ソフトを使用しています。

今日の社会では、迅速かつ効率的な医療ソリューションが求められており、バイオメディカルエンジニアリングの未来は、幅広い発展の道筋をたどっています。日常的に使用されている電子機器は、健康問題の前に症状を分析し、可能性のある問題を予防するために、バイタルサインの値に続いて、患者の遠隔監視を可能にします。バイオメディカルエンジニアリングのもう一つのトレンドは、実験器具の簡素化である。LOC(Lab On a Chip)のようなシステムは、実験室の機能を1つのチップに統合します。新しいロボット手術技術、人工組織や再生組織の製造のための新しい有機材料、あるいは人工臓器の3Dプリントなど、将来の医療ニーズを解決することが可能になります。

製品を見る
関連資料
生物医学工学 SUBCATEGORIES

14.1.- 生体力学

バイオメカニクスは、人体の動きをはじめとする生物の生体の動きの力学を研究しています。この研究では、仕事やスポーツなどの日常生活の中で最も単純な動きから、心臓などの内臓の動きまで幅広く研究しています。人体の運動学を研究するために、バイオメカニクスは、力学の原理と解剖学と生理学の知識を応用して、新しい診断・治療機器の設計や、より良い補綴物やインプラントの設計を可能にします。現在、バイオメカニクスでは、関節と筋肉を組み合わせた様々な動きを分析しています。これらの解析により、人体が受ける荷重や応力を調べることができます。人間の運動学の知識は、怪我の治療とその後のリハビリテーション、柔軟な動きを可...
ほら

14.2.- 医用生体工学

生物医学工学は、生物学と医学の分野における工学的知識の応用を研究しています。この工学の中で最も関連性の高い分野の一つがバイオメディカル・エレクトロニクスであり、電子工学の概念を医療機器の開発に応用しています。現在では、医療の現場で開発されたプロセスの多くは、電子工学のサポートが必要となり、あるニーズを解決することができるようになりました。抵抗、コイル、コンデンサなどの基本的な電子素子の組み合わせから、より複雑な信号処理回路、アナログ/デジタル変換(A/D)、電磁波放射など、生体から情報を取得したり、医療に応用したりすることができるデバイスを設計することができます。また、PIDレギュレータ...
ほら

14.3.- 生物医学機器

バイオメディカル機器とは、医学、生物学、医薬品の分野で使用される機器のセットのことです。バイオメディカル機器の設計は、情報を取得したり、治療を行ったり、化学的・生物学的プロセスを実行したりするために設計された機器であるバイオメディカル機器の設計に直結しています。医療技術の分野では、医療機器とは、医療・手術、診断、治療、リハビリテーションを目的とした機器のことである。この装置の目的は、バイタルサインの制御、呼吸制御およびスピロメトリーまたは電気外科などの臨床プロセスの自動化である。また、マイクロ波や超音波、磁気治療などの新しい治療法を応用しています。また、試料の分析、細菌培養、凍結乾燥によ...
ほら
生物医学工学 UNITS
91-120 を表示中 合計 181 商品
PHOTOELASTICITY UNIT - EFO
  • EFO
Available
7.3.1.- 光弾性とひずみ測定
EFO
光弾性実験装置
Unit for photoelasticity practices, illustrating the subjects of the Photoelasticity theory, the Elasticity theory, Strength of Materials, and Structure theory.It is very suitable for the introduction and study of photoelasticity: optical...
UNIT FOR DETERMINING THE GAUGE FACTOR OF STRAIN GAUGES - MFGE
  • MFGE
Available
7.3.1.- 光弾性とひずみ測定
MFGE
ひずみゲージファクター測定実験装置
The Unit for Determining the Gauge Factor of Strain Gauges, "MFGE", allows to determine the k factor of strain gauges.The bar rests on two supports with ball bearings, so that it is possible to work with a load under pure bending.To perform such...
STRAIN GAUGE TRAINING UNIT - MEGE
  • MEGE
Available
7.3.1.- 光弾性とひずみ測定
MEGE
ひずみ計測 演習装置
The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...
PHOTOELASTIC STRESS DEMONSTRATION UNIT - PSD
  • PSD
Available
7.3.1.- 光弾性とひずみ測定
PSD
Photoelastic Stress Demonstration Unit
The Photoelastic Stress Demonstration Unit, "PSD", consists of a frame on which the test specimens are placed. The specimens are made of a special transparent material that has a double optical refraction effect under the action of a mechanical...
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- 機械的試験
EEU/20KN
ユニバーサル素材試験装置
The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...
BRINELL HARDNESS TESTING UNIT - EEDB
  • EEDB
Available
7.3.2.1.- 機械的試験
EEDB
ブリネル硬さ試験装置
The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...
CREEP TESTING UNIT - EEFCR
  • EEFCR
Available
7.3.2.1.- 機械的試験
EEFCR
クリープ試験装置
The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...
COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC
  • EEFC
Available
7.3.2.1.- 機械的試験
EEFC
コンピューター制御疲労試験装置
The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...
FATIGUE TESTING UNIT - EEF
  • EEF
Available
7.3.2.1.- 機械的試験
EEF
疲労試験装置
The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- 機械的試験
MEBM
Euler Buckling Modes Unit
With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
TORSION AND BEND UNIT - MTP
  • MTP
Available
7.3.2.1.- 機械的試験
MTP
ねじり曲げ実験装置
The Torsion and Bend Unit, "MTP", is a combined apparatus for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate its transport...
TORSION UNIT - MTB
  • MTB
Available
7.3.2.1.- 機械的試験
MTB
トーション実験装置
The Torsion Unit, "MTB", allows to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a metallic rod is fastened by...
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- 機械的試験
MTT
Torsion Test Unit (30Nm)
To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- 機械的試験
MTTU
Tensile Tester Unit
With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...
BASIC ELECTRONICS AND ELECTRICITY LABORATORY - LIEBA
  • LIEBA
Available
14.2.1.6.- 电力电子
LIEBA
基礎電子電気工学統合実験室:
We present a flexible and modular-based system for learning basic electronics, basic electricity and circuit theory. The advantage given by this learning and teaching system is that the student establishes his own rhythm, thus rendering...
DIRECT CURRENT (DC) CIRCUITS MODULE - N-M1
  • N-M1
Available
14.2.1.1.- 基本的な電気法の概念
N-M1
Direct Current (DC) Circuits Module
For the correct understanding of electronics it is necessary to know some fundamental laws and theorems such as Ohm’s Law, Kirchhoff’s Laws and other simple theorems of initiation to D.C. circuits.With Direct Current (D.C.) Circuits Module,...
ALTERNATING CURRENT (AC) CIRCUITS MODULE - N-M2
  • N-M2
Available
14.2.1.1.- 基本的な電気法の概念
N-M2
Alternating Current (AC) Circuits Module
In contrast to DC, which always has the same direction and sense, in AC the flow of electrons changes direction periodically with a frequency of 50 or 60 Hz (depending on the country).With Alternating Current (AC) Circuits Module, "N-M2", designed...
ELECTRIC NETWORKS MODULE - N-M16
  • N-M16
Available
14.2.1.1.- 基本的な電気法の概念
N-M16
Electric Networks Module
After studying the basic knowledge of electrical networks, we must understand and investigate the dependence between current and voltage applied to different electrical devices.With the Electric Networks Module, "N-M16", designed by EDIBON, it is...
ELECTROMAGNETISM MODULE - N-M17
  • N-M17
Available
14.2.1.1.- 基本的な電気法の概念
N-M17
Electromagnetism Module
Electromagnetism is the interaction between electric charges. It is described in terms of charges interacting between of electric and magnetic fields.With the Electromagnetism Module, "N-M17", designed by EDIBON, the operation of electromagnetic...
THREE-PHASE CIRCUITS MODULE - N-M18
  • N-M18
Available
14.2.1.1.- 基本的な電気法の概念
N-M18
Three-phase Circuits Module
Three-phase voltage is essentially a system of three alternating voltages, coupled (all 3 are produced simultaneously in a generator) and 120º out of phase with each other (i.e. one third of the period).The Three-phase Circuits Module, "N-M18",...
OSCILLATORS MODULE - N-M6
  • N-M6
Available
14.2.1.2.- アナログエレクトロニクス
N-M6
Oscillators Module
Oscillators operation is usually very similar in all of them: the oscillating circuit produces an oscillation, then the amplifier increases it and finally the feedback network takes a part of the energy from the oscillating circuit and introduces...
OPERATIONAL AMPLIFIERS MODULE - N-M7
  • N-M7
Available
14.2.1.2.- アナログエレクトロニクス
N-M7
Operational Amplifiers Module
Operational amplifiers are compact, active, linear and high-gain devices designed to provide the desired transfer function. An operational amplifier consists of an electronic circuit having two inputs and one output. The output is the difference...
FILTERS MODULE - N-M8
  • N-M8
Available
14.2.1.2.- アナログエレクトロニクス
N-M8
Filters Module
An electronic filter is an element that allows electrical signals to pass through it, at a specific frequency or frequency ranges while preventing the passage of others, being able to modify both, their amplitude and phase. It is a device that...
ANALOG/DIGITAL CONVERTERS MODULE - N-M60
  • N-M60
Available
2.3.3.- デジタルエレクトロニクス
N-M60
Analog/Digital Converters Module
Most of the "information" generated in the world by various physical phenomena has a strong analogical character. This means that the information undergoes a continuous variation within certain limits determined over time. Of course, there is also...
リクエスト情報