7.1.2.1.- メカニズム

メカニズム UNITS
1-13 を表示中 合計 13 商品
SLIDER CRANK MECHANISM - MBD
  • MBD
Available
14.1.2.1.- メカニズム
MBD

スライダークランク機構

The Slider Crank Mechanism, "MBD", designed by EDIBON, is an example of slider-crank mechanism.This mechanism is made of aluminum and consists of a rotary element (graduated disc), called crank, connected to a rigid bar, calledconnecting rod. When...
SCOTCH YOKE MECHANISM - MYE
  • MYE
Available
14.1.2.1.- メカニズム
MYE

スコッチヨーク機構

The Scotch Yoke Mechanism, "MYE", designed by EDIBON, is an example of slider-crank mechanism for converting the linear motion of a slider into rotational motion or vice versa. It is made of aluminum and consists of a rotary element, called...
SLOTTED LINK MECHANISM - MBM1
  • MBM1
Available
14.1.2.1.- メカニズム
MBM1

スロット連結機構

The Slotted Link Mechanism, "MBM1", is an example of a quick-return mechanism, capable of transforming circular motion into reciprocating motion. It is made of aluminum and consists of a rotary element (graduated disk), called crank, connected to...
FOUR-BAR MECHANISM - MCA
  • MCA
Available
14.1.2.1.- メカニズム
MCA

4節回転連鎖機構

The Four-Bar Mechanism, "MCA", designed by EDIBON, is a bench-top unit to perform laboratory experiments.It is made of anodized aluminum and consists of two rotary elements (graduated discs) mounted on ball bearings. The discs include a scale to...
GENEVA STOP MECHANISM - MME
  • MME
Available
14.1.2.1.- メカニズム
MME

ゼネバ式巻き止め機構

The Geneva Stop Mechanism, "MME", designed by EDIBON, is a mechanism that transforms continuous circular motion into intermittent motion. It is a positive drive in which the driven wheel is positively moved or locked.It is made of aluminum and...
COUPLING MECHANISM - MAC
  • MAC
Available
14.1.2.1.- メカニズム
MAC

カップリング機構

The Coupling Mechanism, "MAC", represents a simple Oldham type coupling. The lateral displacement of the input and output shafts may be varied and circular scales are fitted to the input and output flanges.It consists of two outer discs made of...
HOOKE'S JOINT MECHANISM - MUN
  • MUN
Available
14.1.2.1.- メカニズム
MUN

フック継手機構

The Hooke’s Joint Mechanism, "MUN", designed by EDIBON, represents a universal coupling, also called a U-joint, Hooke joint or Cardan joint. The Hooke joint is a universal mechanism that is often used to transmit rotary motion between two...
CAM AND FOLLOWER MECHANISM - MEX
  • MEX
Available
14.1.2.1.- メカニズム
MEX

カム・従動機構

The Cam and Follower Mechanism, "MEX", allows to study the cam-follower and eccentric-follower mechanisms. For that purpose, several plate cam models in different forms, one eccentric and several roller-shaped, flat-shaped, wedge-shaped and...
CRANK MECHANISM - MBI
  • MBI
Available
14.1.2.1.- メカニズム
MBI

クランク機構

The Crank Mechanism "MBI", is a unit designed to observe, study and record the motion of a crank and the forces involved in a simple engine mechanism. The piston is linearly displaced through a cylinder with the aid of a guide.Bearings are coupled...
ACKERMANN STEERING MECHANISM - MDA
  • MDA
Available
14.1.2.1.- メカニズム
MDA

アッカーマンステアリング機構

The Ackermann Steering Mechanism, "MDA", is a bench-mounted unit designed to determine the lead angle of a steering trapezoid in an Ackermann steering mechanism, the disadvantages of incorrectly adjusted track rods and the influence of the track...
WINCH MECHANISM - MMEL
  • MMEL
Available
14.1.2.1.- メカニズム
MMEL

ウィンチ機構

The Winch Mechanism, "MMEL", allows to study the lifting velocity and load transmission of a winch. Efficiency and load transmission can be determined by force balance.The unit consists of a gear transmission mechanism. One gear is the input gear...
BAR LINKAGES UNIT - MBLU
  • MBLU
Available
14.1.2.1.- メカニズム
MBLU

Bar Linkages Unit

The Bar Linkages Unit "MBLU" allows many experiments using different arrangements of their parts. The "MBLU" unit includes a selection of more than 20 perforated bars of different lengths and pivots or ‘joints’ to allow students to configure...
リクエスト情報