8.9.- インストールとメンテナンス

現代社会のニーズは、それに適応するために進化と改修を続けていかなければならないため、どの業界にとっても課題となっています。

もっと見る

近年、新しい産業革命や「インダストリー4.0」、「モノのインターネット」(IIoT)や「スマートファクトリー」の出現により、既存のものを改修する際の新しい設備の設計における最も洗練された技術の応用により、これらのニーズに対応することが可能になりました。

これらすべての技術的進歩と徹底した管理にもかかわらず、生産プロセスに関わるすべての要素が機械的・電気的な摩耗(努力、負荷など)を受け、その耐用年数が限られていることを忘れてはなりません。致命的な故障、生産停止、または非生産的な時間の増加を意味するあらゆる種類のプロセスを避けるために、機械、電気システムなどの良好なメンテナンスを実施することが非常に重要です。

従来は2種類のメンテナンスしか考えられていませんでした。

  • 矯正: それは失敗が既に起こったときにそれを解決することから成っています。
  • 予防的: それはすべてのそれらの問題のある要素の周期的な修正から成り、これが考えられていたらそれらを取り替えるために。

これらのタイプのメンテナンスは、ほとんどの場合、非常に高額で不要なコストがかかることを暗示しています。現在では、利用可能な技術のおかげで、システムのすべてのコンポーネントに関わるすべての変数を網羅的に分析し、適切なタイミングでそれらを交換することで構成される予知保全を実施することが可能になりました。

しかし、あなたが摩耗の対象となるすべてのそれらの機械部品を被ることができます障害をより大きく制御したい場合は、問題の根源を探して、予測を超えて一歩を行くことで構成されているプロアクティブメンテナンスとして知られているメンテナンスの別のタイプがあります。

製品を見る
インストールとメンテナンス UNITS
1-30 を表示中 合計 32 商品
UNIT TO STUDY A BALL VALVE CUTAWAY MODEL - BVCM
  • BVCM
Available
8.9.1.- クションモデル
BVCM
Unit to Study a Ball Valve Cutaway Model
The Unit to Study a Ball Valve Cutaway Model, "BVCM", allows the students to visualize the inner parts of a ball valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile features that...
UNIT TO STUDY A PIPE MESH FILTER CUTAWAY MODEL - PMFCM
  • PMFCM
Available
8.9.1.- クションモデル
PMFCM
Unit to Study a Pipe Mesh Filter Cutaway Model
The Unit to Study a Pipe Mesh Filter Cutaway Model, "PMFCM", allows the students to visualize the inner parts of a mesh filter, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a mesh filter...
UNIT TO STUDY A WATER METER CUTAWAY MODEL - WMCM
  • WMCM
Available
8.9.1.- クションモデル
WMCM
Unit to Study a Water Meter Cutaway Model
The Unit to Study a Water Meter Cutaway Model, "WMCM", allows the students to visualize the inner parts of a water meter, to evaluate the relation with each other accurately and to understand their function.It is a model of a device that measures,...
CENTRIFUGAL PUMP CUTAWAY MODEL UNIT - CPCM
  • CPCM
Available
8.9.1.- クションモデル
CPCM
選択型モデルポンプ装置
The Centrifugal Pump Cutaway Model Unit, "CPCM", allows the students to visualize the inner parts of a centrifugal pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of centrifugal pump is...
GEAR PUMP CUTAWAY MODEL UNIT - GPCM
  • GPCM
Available
8.9.1.- クションモデル
GPCM
Gear Pump Cutaway Model Unit
The Gear Pump Cutaway Model Unit, "GPCM", allows the students to visualize the inner parts of a gear pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of gear pump is composed of real...
PISTON PUMP CUTAWAY MODEL UNIT - PPCM
  • PPCM
Available
8.9.1.- クションモデル
PPCM
Piston Pump Cutaway Model Unit
The Piston Pump Cutaway Model Unit, "PPCM", allows the students to visualize the inner parts of a piston pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of piston pump is composed of...
ASSEMBLY OF A SHUT-OFF VALVE UNIT - ASV
  • ASV
Available
8.9.2.- 取り外し可能なモデル
ASV
シャットオフバルブ取り付け装置
The Assembly of a Shut-Off Valve Unit, "ASV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts list and the...
ASSEMBLY OF A MOTORIZED CONTROL VALVE UNIT - AMCV
  • AMCV
Available
8.9.2.- 取り外し可能なモデル
AMCV
電動制御弁取り付け装置
The Assembly of a Motorized Control Valve Unit, "AMCV" is a ball motorized control valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit,...
ASSEMBLY OF A CONTROL PNEUMATIC VALVE UNIT - ACPV
  • ACPV
Available
8.9.2.- 取り外し可能なモデル
ACPV
空気式制御弁取り付け装置
The Assembly of a Control Pneumatic Valve Unit, "ACPV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts...
ASSEMBLY AND MAINTENANCE OF PUMPS - AMP
  • AMP
Available
8.9.2.- 取り外し可能なモデル
AMP
Assembly and Maintenance of Pumps
The different sets for the assembly and maintenance of pumps have all the parts in a case for an easy transport, facilitating the clearidentification of all the components and allowing the systematic assembly and disassembly, maintenance and...
ASSEMBLY AND MAINTENANCE OF A CENTRIFUGAL PUMP UNIT - AMCP
  • の付属品 AMP
Available
8.9.2.- 取り外し可能なモデル
AMCP
遠心ポンプ取り付けと保守装置
の付属品 AMP
The centrifugal pumps belong to the group of rotodynamic pumps, where the fluid is boosted thanks to the acceleration acquired whenpassing through the operating impeller.This acceleration, which starts from the center of the impeller and goes to...
ASSEMBLY AND MAINTENANCE OF A MULTISTAGE CENTRIFUGAL PUMP UNIT - AMMCP
  • の付属品 AMP
Available
8.9.2.- 取り外し可能なモデル
AMMCP
多段階遠心ポンプ取り付けと保守装置
の付属品 AMP
The multistage centrifugal pumps belong to the group of rotodynamic pumps, where the water is driven by centrifugal forces caused by the rotational movement of the impeller. Multi-stage centrifugal pumps can increase its lifting height, depending...
ASSEMBLY AND MAINTENANCE OF A SCREW PUMP UNIT - AMSP
  • の付属品 AMP
Available
8.9.2.- 取り外し可能なモデル
AMSP
スクリューポンプ取り付けと保守装置
の付属品 AMP
The screw pumps belong to the group of positive displacement pumps, which use aneccentric helical screw (rotor) that moves inside a sleeve (stator), making the liquid flowbetween the screw and the sleeve. The most important applications of this...
ASSEMBLY AND MAINTENANCE OF A GEAR PUMP UNIT - AMGP
  • の付属品 AMP
Available
8.9.2.- 取り外し可能なモデル
AMGP
歯車ポンプ取り付けと保守装置
の付属品 AMP
The gear pumps belong to the group of positive displacement, rotary piston pumps, which produce flow by transporting the fluid betweenthe teeth of two coupled gears. One of them is driven by the shaft of the pump (driving shaft), which turns the...
BACKFLOW PREVENTION TRAINING UNIT - BFPT
  • BFPT
Available
8.9.3.- 設置および保守の慣行
BFPT
Backflow Prevention Training Unit
The Backflow Prevention Training Unit, "BFPT", allows verifying the operation of multiple non-return devices. The system contains the most common backflow prevention devices used in the industry. The main objective is to recognize each element...
THREE-WAY MIXING VALVE TRAINING UNIT - TEV3V
  • TEV3V
Available
9.10.3.- 設置および保守の慣行
TEV3V
スリーウェイ混合バルブ演習装置
The Three-Way Mixing Valve Training Unit, "TEV3V", allows to demonstrate the function of a three-way mixing valve in a hot water heating system. The three-way mixing valve in the heating system regulates the supply water temperature to a heating...
FOUR-WAY MIXING VALVE TRAINING UNIT - TEV4V
  • TEV4V
Available
9.10.3.- 設置および保守の慣行
TEV4V
フォーウェイ混合バルブ演習装置
The Four-Way Mixing Valve Training Unit, "TEV4V", allows to demonstrate the function of a four-way mixing valve in a hot water heating system. The four-way mixing valve in the heating system regulates the circulation and feed flow temperatures of...
SANITARY FITTINGS TRAINING UNIT - TEIS
  • TEIS
Available
9.10.3.- 設置および保守の慣行
TEIS
衛生設備フィッティング演習装置
The Sanitary Fittings Training Unit, "TEIS", has been designed by EDIBON for training in the plumbing sector. It consists of an anodized aluminum frame and panels in painted steel in which tests can be carried out with the most common systems of...
DRINKING WATER INSTALLATION UNIT - TIAP
  • TIAP
Available
9.10.3.- 設置および保守の慣行
TIAP
飲料水処理設備
The Drinking Water Installation Unit, "TIAP", has been designed to demonstrate domestic water heating from the cold water supply. A typical domestic drinking water system is attached to the front panel of the unit. The unit includes the most...
PROTECTION OF DRINKING WATER TRAINING UNIT - TPAP
  • TPAP
Available
9.10.3.- 設置および保守の慣行
TPAP
飲料水保護演習装置
The Protection of Drinking Water Training Unit, "TPAP", has been designed by EDIBON to study cases in which the drinking water system is contaminated with wastewater. It is specially designed for the training of students in the plumbing sector.The...
PIPE CLEANING TRAINING UNIT - TELT
  • TELT
Available
9.10.3.- 設置および保守の慣行
TELT
導管洗浄演習装置
The Pipe Cleaning Training Unit, "TELT", designed by EDIBON, simulates a real house piping system, so original components used in plumbing systems are employed.The objective of this unit is to study the cleaning of pipes from the sanitation...
リクエスト情報