7.4.- インストールとメンテナンス

現代社会のニーズは、それに適応するために進化と改修を続けていかなければならないため、どの業界にとっても課題となっています。

もっと見る

近年、新しい産業革命や「インダストリー4.0」、「モノのインターネット」(IIoT)や「スマートファクトリー」の出現により、既存のものを改修する際の新しい設備の設計における最も洗練された技術の応用により、これらのニーズに対応することが可能になりました。

これらすべての技術的進歩と徹底した管理にもかかわらず、生産プロセスに関わるすべての要素が機械的・電気的な摩耗(努力、負荷など)を受け、その耐用年数が限られていることを忘れてはなりません。致命的な故障、生産停止、または非生産的な時間の増加を意味するあらゆる種類のプロセスを避けるために、機械、電気システムなどの良好なメンテナンスを実施することが非常に重要です。

従来は2種類のメンテナンスしか考えられていませんでした。

  • 矯正: それは失敗が既に起こったときにそれを解決することから成っています。
  • 予防的: それはすべてのそれらの問題のある要素の周期的な修正から成り、これが考えられていたらそれらを取り替えるために。

これらのタイプのメンテナンスは、ほとんどの場合、非常に高額で不要なコストがかかることを暗示しています。現在では、利用可能な技術のおかげで、システムのすべてのコンポーネントに関わるすべての変数を網羅的に分析し、適切なタイミングでそれらを交換することで構成される予知保全を実施することが可能になりました。

しかし、あなたが摩耗の対象となるすべてのそれらの機械部品を被ることができます障害をより大きく制御したい場合は、問題の根源を探して、予測を超えて一歩を行くことで構成されているプロアクティブメンテナンスとして知られているメンテナンスの別のタイプがあります。

製品を見る
インストールとメンテナンス UNITS
1-30 を表示中 合計 37 商品
UNIT TO STUDY A WORM GEAR CUTAWAY MODEL - WGCM
Available
7.4.1.- クションモデル
WGCM

Unit to Study a Worm Gear Cutaway Model

の付属品 CMTM
It is a worm gear with shafts perpendicular to each other. It consists of a helical worm screw and a circular cogwheel. Some applications of this device are automatic doors or elevators systems, where motion in one direction and blocking the...
SPUR GEAR ASSEMBLY UNIT - SGA
  • SGA
Available
7.4.2.- 取り外し可能なモデル
SGA

Spur Gear Assembly Unit

The Spur Gear Assembly Unit, "SGA", consists of a spur gear with spiral gearing. The gear consists of a single reduction stage and a fixed transmission ratio. It is a gear unit composed of: driving and driven shafts, drive wheel and pinion,...
COMBINED GEAR ASSEMBLY UNIT - CGA
  • CGA
Available
7.4.2.- 取り外し可能なモデル
CGA

Combined Gear Assembly Unit

A combined gear is a two or more stage gear with different types of gears. Combined gears play an important role in all kinds of industrial machines. Some of the most noteworthy applications are, for example, in elevators, car industry, transport...
COMPUTER CONTROLLED MACHINE DIAGNOSIS UNIT - MDUC
  • MDUC
Available
7.4.3.- 設置および保守の慣行
MDUC

Computer Controlled Machine Diagnosis Unit

The Computer Controlled Machine Diagnosis Unit, "MDUC", of EDIBON, allows you to perform vibration measurement practical exercises, measuring the displacement, velocity and acceleration of vibrations in the time-frequency range.The Computer...
MACHINE DIAGNOSIS - MDU
  • MDU
Available
7.4.3.- 設置および保守の慣行
MDU

Machine Diagnosis

The family of Machine Diagnosis Unit, "MDU", of Edibon, allows you to perform vibration measurement practical exercises, measuring the displacement, velocity and acceleration of vibrations in the time-frequency range.The MDU Base Unit, "MDU-UB",...
MOBILE STRUCTURE FOR MDU - MDU-MLB
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-MLB

Mobile Structure for MDU

の付属品 MDU
The Mobile Structure for MDU, "MDU-MLB", is a robust structure designed to quickly and easily assemble the various elements of the MDU Base Unit, "MDU-UB" or the Computer Controlled Machine Diagnosis Unit, "MDUC", and thus assemble a mobile test...
TOP TABLE STRUCTURE FOR MDU - MDU-SM
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SM

Top Table Structure for MDU

の付属品 MDU
A bench-top structure consisting of a slotted table with anodized aluminum frames of 1100 x 770 x 820 mm.It has a transparent protective cover that protects against the rotating parts and allows us to observe the different experiments. The cover...
SOFTWARE, SENSORS AND CONTROL FOR MDU UNIT - MDU-SSC
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SSC

Software, Sensors and Control for MDU Unit

の付属品 MDU
The aim of the vibration analyzer is to assess the machine diagnosis testing with the different kits related to the vibration interface technology.The system consists of two acceleration sensors, a speed sensor, a measuring amplifier with...
BREAK AND LOAD UNIT - MDU-BLU
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-BLU

Break and Load Unit

の付属品 MDU
The Break and Load Unit, "MDU-BLU", of EDIBON is a magnetic particle brake, a display unit and an electrical control. It is possible to precisely adjust the braking moment. The excitation current is used as a measurement of the braking moment and...
SET OF ELASTIC SHAFT - MDU-SES
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SES

Set of Elastic Shaft

の付属品 MDU
The Set of Elastic Shaft, "MDU-SES", of EDIBON allows to study the behavior of an elastic rotor subjected to imbalance and balance of elastic rotors in operation. It is possible to study the resonance and the phenomena occurred in subcritical and...
SET OF ROTATING SHAFT WITH CRANK - MDU-SRS
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SRS

Set of Rotating Shaft with Crank

の付属品 MDU
It is important that fissures resulting from material fatigue in rotating machines are detected in good time before the breakage occurs, which usually leads to fatal consequences.The Set of Rotating Shaft with Crank, "MDU-SRS", consists of two...
SET OF ROLLER BEARINGS WITH FAULTS - MDU-SRBF
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SRBF

Set of Roller Bearings with Faults

の付属品 MDU
To determine the remaining life cycle of a roller bearing and decide on its replacement, the slow variation of the vibration spectrum is analyzed. The spectral distribution will enable to draw accurate conclusions about the type of defect and its...
SET OF COUPLINGS - MDU-SCO
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SCO

Set of Couplings

の付属品 MDU
The Set of Couplings, "MDU-SCO", allows to compare the properties of different couplings such as curved tooth, bolt, flange and claw couplings.The vibrational behavior of the different types of couplings is important to draw conclusions about...
SET OF BELT DRIVE - MDU-SBD
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SBD

Set of Belt Drive

の付属品 MDU
The belt drives are noiseless drive devices, have a long life and require little maintenance provided that its design, assembly and adjustment are correct.The Set of Belt Drive, "MDU-SBD", allows to study the conditions that cause vibrations or...
SET TO STUDY DAMAGE IN GEARS - MDU-SSDG
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SSDG

Set to Study Damage in Gears

の付属品 MDU
The Set to Study Damage in Gears, "MDU-SSDG", allows to study the vibrational behavior of gears with typical defects.For that purpose, gears with tooth defects and gears without defects are included, so a comparative study can be carried out. The...
SET OF CRANK MECHANISM - MDU-SCM
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SCM

Set of Crank Mechanism

の付属品 MDU
The compressors and pumps frequently use crank and connecting rod mechanisms. The force and mass oscillations cause vibrations in the units.The Set of Crank Mechanism, "MDU-SCM", allows to adjust the stroke, mass compensation and bearing...
SET TO STUDY CAVITATION IN PUMPS - MDU-SSCP
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SSCP

Set to Study Cavitation in Pumps

の付属品 MDU
Pump cavitation is produced when steam cavities are created within a fluid in which forces act responding to the pressure differences. Cavitation causes noise, damage to components and loss of performance. The Set to Study Cavitation in Pumps,...
BLOWER VIBRATION SET FOR MDU - MDU-SSVF
  • の付属品 MDU
Available
7.4.3.- 設置および保守の慣行
MDU-SSVF

Blower Vibration Set for MDU

の付属品 MDU
In the Blower Vibration Set for MDU, "MDU-SSVF", the vibrations are magnetically induced. It is possible to study three impellers with a different number of movable vanes. It is also possible to study the gyroscopic effect by mounting the flywheel...
リクエスト情報