AE-PLC-MR1 Station de Table Rotative 1

ROTARY TABLE WORKSTATION 1 - AE-PLC-MR1

SYSTEMES INNOVANTS

The "AE-PLC-MR1" is an automatic rotary table with a feeder, quality control and mounting system integrated into it.

Voir description générale

Description Générale

The "AE-PLC-MR1" is an automatic rotary table with a feeder, quality control and mounting system integrated into it. The "AE-PLC-MR1" has a vertical storage, the system provides pieces one by one to the rotary table, then, a quality control system checks that the piece has the correct dimensions. Finally, if the piece is appropriated, is mounted inside another piece. If the piece has not the correct dimensions is discarded by the rotary table.

The "AE-PLC-MR1" workstation is designed as a modular system to facilitate the understanding of the unit. The main components are:

  • The PLC: is composed by the CPU limit and all extra modules needed to perform a corrent working of the workstation and all the extra modules needed to perform a correct working of the workstation.
  • The control panel: with start/stop button, emergency pushbutton, reset button, light indicators to show current state of the process, etc.
  • The pneumatic circuit: contains the required solenoid valves, the pressure components, the filters and regulators to assure the appropriate working of the unit.
  • The workstation: it is composed by real industrial components used by the rotary table systems such as reed sensors, presence sensors, DC motor, inductive sensors, rotary table with 8 positions, etc.

The "AE-PLC-MR1" is an independent workstation that can work alone and/or in conjunction with other workstation to make up a complete Flexible Manufacturing system*.

*The Flexible manufacturing systems product list is available at "Flexible Manufacturing Systems (FMS)" area of the general catalogue.

Des exercices et pratiques guidées

EXERCICES GUIDÉS INCLUS DANS LE MANUEL

  1. Introduction to flexible manufacturing system (FMS).
  2. Introduction to pneumatics and electro-pneumatics.
  3. Introduction to vacuum technology.
  4. Study of the sensor detection.
  5. Configuration of a pneumatic application.
  6. Manual control of the rotary table system.
  7. Manual control of the feeding system on a rotary table.
  8. Manual control of the quality control and mounting system on a rotary table.
  9. Automatic control of the rotary table system.
  10. Automatic control of the feeding system on a rotary table.
  11. Automatic control of the quality control and mounting system on a rotary table.
  12. Change the parameters of the rotary table process.
  13. Optimization of the process time.
  14. Study and analysis of the faults inserted in the process with the fault generation module.

ÉLÉMENTS REQUIS

ÉLÉMENTS SUPPLÉMENTAIRES RECOMMANDÉS

UNITÉS SIMILAIRES DISPONIBLES

Qualité

Service après vente

Demander des informations