ベストセラー
757-792 を表示中 合計 916 商品
DIRECT CURRENT (DC) CIRCUITS MODULE - N-M1
  • N-M1
Available
14.2.1.1.- 基本的な電気法の概念
N-M1
直流回路モジュール (DC)
For the correct understanding of electronics it is necessary to know some fundamental laws and theorems such as Ohm’s Law, Kirchhoff’s Laws and other simple theorems of initiation to D.C. circuits.With Direct Current (D.C.) Circuits Module,...
APPLICATIONS OF DC GENERATORS - AEL-DCGEA
  • AEL-DCGEA
Available
4.3.2.2.- DC電気モーターおよびジェネレーター
AEL-DCGEA
直流発電機の応用
The Application of DC Generator "AEL-DCGEA" is designed for the study of the main operations performed in the industrial field with DC Generators.The student will learn the most important operations of these electrical machines faithfully by using...
DC ELECTRICAL MOTORS APPLICATION - AEL-DCEMA
  • AEL-DCEMA
Available
4.3.2.2.- DC電気モーターおよびジェネレーター
AEL-DCEMA
直流電動機アプリケーション
The DC Electrical Motors Application, "AEL-DCEMA", has been developed for theoretical and practical training on the most important operations carried out with different DC electric motors such as the DC motor with independent excitation, the DC...
DC ELECTRICAL MOTORS APPLICATIONS - AEL-DCEMT
  • AEL-DCEMT
Available
4.3.2.2.- DC電気モーターおよびジェネレーター
AEL-DCEMT
直流電動機アプリケーションズ
The DC Electrical Motors Applications, "AEL-DCEMT", has been designed by EDIBON to carry out electrical/mechanical tests for a great variety of DC motors. Such tests allow obtaining the most significant electrical and mechanical characteristics of...
LINEAR POSITION AND FORCE - M45
  • M45
Available
14.2.1.5.- 計装と制御
M45
直線位置・応力
Linear Variable Displacement Transducers (LVDT) provide a certain amount of voltage output relative to the parameters being measured, for example force, for signal conditioning.With Linear Position and Force Unit, "M45", designed by EDIBON, it is...
DEPRESSION MEASUREMENT SYSTEM (VACUUM GAUGE) - FME26
  • FME26
Available
8.1.2.- 測定
FME26
真空ゲージ減圧測定システム
The Depression Measurement System (vacuum gauge), "FME 26", is designed to be connected to the inlet of some flow aspiration system, in a way that we could measure the depression made by the so-called aspiration system. Such system will be...
MAGNETIC FIELD STUDY SET - FCM
Available
1.1.- 3D物理学
FCM
磁場研究セット
の付属品 EFAC
The Magnetic Field Study Set, "FCM", allows the spatial study of the magnetic field in all its dimensions (calculation of magnetic field strength, lines of force, vector potential and equipotential lines both in static and dynamic fields). For...
MAGNETIC LEVITATION CONTROL MODULE - RYC-CLM
Available
6.1.1.1.- 理論的-実践的基礎
RYC-CLM
磁気浮上のPID制御・調整装置
の付属品 RYC, RYC/T
The "RYC-CLM" Magnetic Levitation Control module has been designed to study a practical control system.The "RYC-CLM" module consists of two main components: the "RYC-CLM" apparatus and the "RYC-CLM" interface box. The "RYC-CLM" apparatus contains...
DEAD WEIGHT CALIBRATOR - FME10
  • FME10
Available
8.1.2.- 測定
FME10
積載重量キャリブレーター
The Pressure Gauge Calibrator, "FME10", designed by EDIBON, allows the study of the operation of a Bourdon type pressure gauge using a standard set of calibrated weights and the determination and the study of the pressure gauge hysteresis...
AERODYNAMIC TESTING BENCH - ATBB
  • ATBB
Available
8.6.- 空気力学
ATBB
空力試験台
The Aerodynamic Testing Bench, "ATBB", designed by EDIBON , has two main components: a radial fan with speed control and a working section where the different accessories for the tests are fixed.The radial blower impels the air through an air...
AERODYNAMIC TUNNEL, 300 X 300 MM - TA300/300
  • TA300/300
Available
8.6.- 空気力学
TA300/300
空気力学トンネル、300X300 mm
The Aerodynamic Tunnel, 300 x 300 mm, "TA300/300", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan located at the discharge end of the...
AERODYNAMIC TUNNEL, 50 X 250 MM - TA50/250
  • TA50/250
Available
8.6.- 空気力学
TA50/250
空気力学トンネル、50X250 mm
The Aerodynamic Tunnel, 50 x 250 mm, "TA50/250", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan located at the discharge end of the...
PNEUMATIC TEST MODULE - BS9
  • の付属品 BS
Available
6.1.2.1.- センサーと電子機器
BS9
空気圧試験モジュール
の付属品 BS
The Pneumatics Test Module, "BS9", has been designed to teach techniques of control and handling of a pneumatic piston.All connections of the different BS9 mechanisms will have output through a group of 2 mm. terminals. They are placed in the...
AIR CONDITIONING LABORATORY UNIT - TAAB
  • TAAB
Available
9.2.- 暖房、 換気、 空調、 温水
TAAB
空調実験室装置
The Air Conditioning Laboratory Unit, "TAAB", has been designed to study the change of the air conditions and the refrigeration circuit. The unit consists of a testing tunnel made in stainless steel, in which there have installed two windows....
ISOTHERMAL REACTOR WITH STIRRER - QRIA
Available
11.2.- 化学反応器
QRIA
等温攪拌反応器
の付属品 QRQC
The Stirred Isothermal Reactor, "QRIA," designed by EDIBON, provides a controlled and uniform environment for carrying out chemical reactions. This reactor is essential for advancing knowledge in the fields of chemistry and process engineering,...
ISOTHERMAL REACTOR WITH STIRRER AND DISTILLATION - QRIA/D
Available
11.2.- 化学反応器
QRIA/D
等温攪拌反応器と蒸留
の付属品 QRQC
The Isothermal Reactor with Stirrer and Distillation, "QRIAD/D," designed by EDIBON, enables the calculation and comparison of kinetic constants, as well as the determination of activation energy for the studied reactions. This reactor is...
TUBULAR FLOW REACTOR - QRFT
Available
11.2.- 化学反応器
QRFT
管流反応器
の付属品 QRQC
The Tubular Flow Reactor, "QRFT," specifically designed by EDIBON, is intended for the kinetic study of liquid-liquid homogeneous reactions. This unit allows for a wide range of practices, including the determination of kinetic equations, the...
TUBULAR FLOW REACTOR FOR QR - QRT
  • の付属品 QR
Available
11.2.- 化学反応器
QRT
管流反応器(QR用)
の付属品 QR
The Tubular Flow Reactor for QR, "QRT", has been designed by EDIBON to conduct the kinetic study of homogeneous liquid-liquid reactions.In this unit, a continuous stream of reactants is passed through, which mix and react as they flow through the...
SIMPLE HYDRAULIC UNIT - MSH
  • MSH
Available
7.2.1.- ブレーキとクラッチ
MSH
簡易油圧装置
The Simple Hydraulic Unit, "MSH", has been designed for studies related to mechanical engineering and motor vehicles. It is used to demonstrate how a liquid can be used to transmit a force.The unit can also be used to conduct experiments to study...
COMBINED GEAR ASSEMBLY UNIT - CGA
  • CGA
Available
7.4.2.- 取り外し可能なモデル
CGA
組み合わせ歯車装置取り付け装置
A combined gear is a two or more stage gear with different types of gears. Combined gears play an important role in all kinds of industrial machines. Some of the most noteworthy applications are, for example, in elevators, car industry, transport...
CRYSTALLIZATION UNIT - QUCB
  • QUCB
Available
11.1.10.- 結晶化と熱分解
QUCB
結晶化装置
The Crystallization Unit, "QUCB", is a unit for the study of the cooling crystallization process. EDIBON has developed this unit to study thecrystallization reaction of those constituents whose solubility changes with the temperature.This unit is...
LINEAR HEAT CONDUCTION MODULE FOR TSTCB - TXC/CLB
Available
9.6.- 熱伝達
TXC/CLB
線形熱伝導装置(TSTCB用)
の付属品 TSTCB
Bench-top unit to study the principles of linear heat conduction and to allow the conductivity of various solid conductors and insulators to be measured.It is given with interchangeable samples of different materials, different diameters and...
リクエスト情報