ベストセラー

577-612 を表示中　合計 921 商品

の付属品 M-KITS

Available

2.2.- 回路アセンブリ用キット

M13/KIT

基本シーケンシャル回路キット

の付属品 M-KITS

With Basic Sequential Circuits Kit, "M13/KIT", designed by EDIBON, all types of bistables, counters, flip-flops, synchronous sequential circuits and the operation of memories can be studied.

FME23

Available

8.1.8.- 油圧パイプ

FME23

The Basic Pipe Network Unit, "FME23", designed by EDIBON, allows the study of pressures and flows created by interconnected pipes, i.e. in a network.The objective of this unit is to simulate the problems that could originate in pipe networks, with...

の付属品 TICC/SS

Available

9.7.- 熱交換器

TIPL/SS

基本プレート熱交換器

の付属品 TICC/SS

BASIC STIRRED-TANK HEAT EXCHANGER WITH DOUBLE JACKET AND COIL - TIVES/SS

の付属品 TICC/SS

Available

9.7.- 熱交換器

TIVES/SS

基本二重ジャケットおよびコイル付き攪拌槽熱交換器

の付属品 TICC/SS

BASIC CONCENTRIC TUBE HEAT EXCHANGER - TITC/SS

の付属品 TICC/SS

Available

9.7.- 熱交換器

TITC/SS

基本同心管熱交換器

の付属品 TICC/SS

FME00/B

Available

8.1.1.- ベースユニット

FME00/B

基本水圧供給システム

The Basic Hydraulic Feed System, "FME00/B", designed by EDIBON is a service unit for different Fluid Mechanics Units as: "FME" type modules, Fluid Friction in Pipes Unit "AFT", etc., increasing the equipment profitability.

BASIC LUMINOSITY CONTROL APPLICATION - AEL-AD6B

AEL-AD6B

Available

4.1.1.- 家庭用電気設備

AEL-AD6B

基本的な明るさ制御応用

The Basic Luminosity Control Application, "AEL-AD6B", has been designed by EDIBON to study how a luminosity control application works. This unit is composed by several modules in order to carry out practices related to switching circuits to...

BASIC COMBINATIONAL CIRCUITS MODULE - N-M12

N-M12

Available

14.2.1.3.- デジタルエレクトロニクス

N-M12

基本的な組み合わせ回路モジュール

A combinational circuit is an electronic circuit in which the value of its outputs at a given instant, depends on the value of the inputs at the same instant. In other words, it is a circuit that has no memory. Combinational circuits work with...

BASIC SEQUENTIAL CIRCUITS MODULE - N-M13

N-M13

Available

14.2.1.3.- デジタルエレクトロニクス

N-M13

基本的な順序回路モジュール

Logic gates and the circuits created with them constitute combinational logic, so called because the output only depends on the combination of the input variables present.There is a second group of logic circuits called sequential logic, so called...

BASIC COMBINATIONAL CIRCUITS KIT - M12/KIT

の付属品 M-KITS

Available

2.2.- 回路アセンブリ用キット

M12/KIT

基本組み合わせ回路キット

の付属品 M-KITS

With Basic Combinational Circuits Kit, "M12/KIT", designed by EDIBON, encoders, decoders, multiplexers, demultiplexers, digital comparators and arithmetic and logical operations can be studied.

DRIVE UNIT FOR TRIBOLOGICAL TESTS - MEMT-UB

の付属品 MEMT

Available

7.1.5.- 摩擦 (摩擦、摩耗、潤滑)

MEMT-UB

基本装置電子コンソール付

の付属品 MEMT

This unit is common for the modules type "MEMT".It consists of a base unit and an electronic console:The Base Unit consists of a drive unit formed by a DC motor with a shaft. The motor is mounted in a reduction gear, obtaining enough torque in the...

BASIC ELECTRONICS AND ELECTRICITY ASSEMBLY KITS: - M-KITS

M-KITS

Available

2.2.- 回路アセンブリ用キット

M-KITS

基本電子電気学装置組み立てキット：

The purpose of Electronics and Electricity Assembly Kits (M-KITS) is to provide the students with the necessary elements for creating their own circuits.

BASIC MECHANICS INTEGRATED LABORATORY - LIMEBA

LIMEBA

Available

7.1.1.- メカニカルファンダメンタルキット

LIMEBA

基礎機械工学統合実験室：

The Integrated Basic Mechanics Laboratory, "LIMEBA," designed by EDIBON, allows for the construction of various experiments on the base panel, where length measurements are possible thanks to the distance between the centers of the perforations...

BASIC FLUIDS MECHANICS INTEGRATED LABORATORY - LIFLUBA

LIFLUBA

Available

8.1.7.- 油圧機械: タービン

LIFLUBA

基礎流体力学統合実験室：

Hydraulics is the branch of science that deals with the mechanical properties of fluids, and Fluid Mechanics provides the foundation for hydraulics.With LIFLUBA (Basic Fluids Mechanics Integrated Laboratory), EDIBON tries to give answer to the...

BASIC ELECTRONICS AND ELECTRICITY LABORATORY: - LIEBA

LIEBA

Available

14.2.1.6.- 电力电子

LIEBA

基礎電子電気工学統合実験室：

We present a flexible and modular-based system for learning basic electronics, basic electricity and circuit theory. The advantage given by this learning and teaching system is that the student establishes his own rhythm, thus rendering...

MTE1

Available

7.2.2.- ギア、ディファレンシャル、トランスミッション

MTE1

外転サイクロイドギア実験装置（1枚）

The Epicyclic Gear Unit (1 element), "MTE1", includes a set of epicyclic gears that allows the student to study different reduction ratios (direct drive and overdrive), as well as torque conversion.A simple epicyclic gears set consists of:Sun gear...

MTE2

Available

7.2.2.- ギア、ディファレンシャル、トランスミッション

MTE2

外転サイクロイドギア実験装置（2枚）

The Epicyclic Gear Unit (2 elements), "MTE2", consists of two coupled epicyclic gears sets. It will allow the students to carry out experiments of different gear ratios, as well as the torque conversions.The epicyclic gears installed in the...

MTE3

Available

7.2.2.- ギア、ディファレンシャル、トランスミッション

MTE3

外転サイクロイドギア実験装置（3枚）

The Epicyclic Gear Unit (3 elements), "MTE3", designed by EDIBON, consists of three coupled epicyclic gears sets. It will allow the students to carry out experiments of different gear ratios, as well as the torque conversions.The epicyclic gears...

UNIT FOR STUDYING FORCES IN AN OVERDETERMINATE TRUSS - MFCS2

MFCS2

Available

7.1.6.- 構造メカニズム

MFCS2

多元トラスにおける応力測定実験装置

The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", designed by EDIBON, allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in...

UNIT FOR STUDYING FORCES IN DIFFERENT SINGLE PLANE TRUSSES - MFCS1

MFCS1

Available

7.1.6.- 構造メカニズム

MFCS1

多様単平面トラスにおける応力測定実験装置

The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", designed by EDIBON, allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the...

TMHA

Available

9.2.- 暖房、換気、空調、温水

TMHA

大気湿度測定実験装置

The Air Humidity Measurement Unit, "TMHA", enables the differences in accuracy between different instruments to measure the air relative humidity. It also includes a fan to show the effects of airflow on the different instruments. A mobile...

PHOTOVOLTAIC SOLAR ENERGY MODULAR UNIT (INTERMEDIATE VERSION) - MINI-EESF/M

MINI-EESF/M

Available

5.3.1.- 光起電力太陽エネルギー

MINI-EESF/M

太陽光発電エネルギーモジュール演習装置（中級版）

Photovoltaic Solar Energy Modular Unit (Intermediate Version), "MINI-EESF/M", is a laboratory scaled unit designed to study all the parameters involved in the solar radiation direct conversion into electricity.The unit is based on some application...

PHOTOVOLTAIC SOLAR ENERGY MODULAR UNIT (BASIC VERSION) - MINI-EESF/B

MINI-EESF/B

Available

5.3.1.- 光起電力太陽エネルギー

MINI-EESF/B

太陽光発電エネルギーモジュール演習装置（基礎版）

The Photovoltaic Solar Energy Modular Unit (Basic Version), "MINI-EESF/B", is a laboratory scaled unit designed to study all the parameters involved in the solar radiation direct conversion into electricity.The unit is based on some application...

PHOTOVOLTAIC SOLAR ENERGY MODULAR UNIT (COMPLETE VERSION) - MINI-EESF

MINI-EESF

Available

5.3.1.- 光起電力太陽エネルギー

MINI-EESF

太陽光発電エネルギーモジュール演習装置（完全版）

Photovoltaic Solar Energy Modular Unit (Complete Version), "MINI-EESF", is a laboratory scaled unit designed to study all the parameters involved in the solar radiation direct conversion into electricity. The unit is based on some application...

EESFB

Available

5.3.1.- 光起電力太陽エネルギー

EESFB

太陽光発電エネルギー実験装置

The sun provides a wide spectrum of solar power. With the exception of the light we see around us every day, the rest of the solar power is invisible. Other parts of the spectrum consist of cosmic beams, gamma rays, x-rays, ultraviolet light,...

PHOTOVOLTAIC ENERGY POWER PLANT - PWP-PE

の付属品 AEL-MGP, AEL-MGP

Available

5.2.- MICROGRIDS

PWP-PE

太陽光発電所

の付属品 AEL-MGP, AEL-MGP

The Photovoltaic Energy Power Plant, PWP-PE, designed by EDIBON, allows for the study of photovoltaic power plants within the context of microgrids.It consists of a three-phase inverter fed with a photovoltaic panel array simulator. The user will...

THERMAL SOLAR ENERGY BASIC UNIT - MINI-EEST

MINI-EEST

Available

5.3.2.- 太陽熱エネルギー

MINI-EEST

太陽熱エネルギー基本実験装置

This unit is a system that transforms solar energy into usable thermal energy.This unit uses the thermosiphon system to heat water or the traditional pumping system. In both cases, the absorbed thermal energy is given by the simulated solar...

EEST

Available

5.3.2.- 太陽熱エネルギー

EEST

太陽熱エネルギー実験装置

The Thermal Solar Energy Unit, "EEST", is a system that transforms solar energy into usable thermal energy. It uses the thermosiphon solar system to heat water or the traditional pumping system. In both cases, the absorbed thermal energy is given...

Available

13.3.- 廃水処理

PDA

好気性消化槽

The objective of the Aerobic Digester, "PDA", is to study and understand aerobic digestion processes and to analyze their main parameters.The unit consists of a 20 l capacity reactor vessel with a tubular membrane made of plastic inside to...

PDAN

Available

13.3.- 廃水処理

PDAN

嫌気性消化槽

The objective of the Anaerobic Digester, "PDAN", is to study and understand the stages of the anaerobic digestion, as well as the anaerobic digestion process itself. It is supplied with two packed anaerobic digesters. In this way, the user can...

STAND-ALONE WIND TURBINE APPLICATION - AEL-SWT

AEL-SWT

Available

5.3.3.- 風力エネルギー

AEL-SWT

孤立したネットワークでの風力タービンのアプリケーション

The Stand-Alone Wind Turbine Aplication, "AEL-SWT", has been designed by EDIBON for the training at both the theoretical and practical levels in the field of wind turbines.The "AEL-SWT" application provides several levels of training to give the...

AE-BR

Available

6.2.5.5.- ロボットワークステーションアプリケーション

AE-BR

学習ステーションロボットアーム

The "AE-BR" is a robotic arm workstation with the programming console included. The robotic arm can command the pneumatic gripper or the electrical driller installed in it.The "AE-BR" workstation is able to perform a lot of functions including:...

AE-PLC-MEMB

Available

6.2.5.2.- プロセスワークステーションアプリケーション

AE-PLC-MEMB

学習ステーション瓶詰め

The Bottling Workstation, "AE-PLC-MEMB", designed by EDIBON, is an automatic rotary table with a vessel feeding system, a controlled water filling system, a cap feeder, a vessel closing system, and finally, an extraction system to a complete...

INDUSTRIAL PROCESSES CONTROL WORKSTATION - AE-PLC-CPI

AE-PLC-CPI

Available

6.2.4.- PLCを使用した産業用アプリケーション

AE-PLC-CPI

学習ステーション産業プロセス制御

The "AE-PLC-CPI" application is a unit that includes different technologies to carry out four control loops in closed loop: flow, level, temperature and pressure. A flexible system of ball valves and pipe connections makes the configuration of the...

AE-PLC-ST

Available

6.2.5.2.- プロセスワークステーションアプリケーション

AE-PLC-ST

学習ステーション穴あけ

The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...

PNEUMATIC HANDLING AND CONVEYOR BELT - AE-PLC-MACT

AE-PLC-MACT

Available

6.2.5.4.- ワークステーションアプリケーションを処理する部品

AE-PLC-MACT

学習ステーション空気圧操作とコンベアベルト

The Pneumatic Handling and Conveyor Belt, "AE-PLC-MACT", is an automatic handling station with a conveyor system commanded by a PLC. The "AE-PLC-MACT" is composed of a pneumatic handling system that uses vacuum technology to move pieces from the...

その他の情報については, お問い合わせください