14.1.- BIOMECHANICS

Biomechanics studies the mechanics of movement of the living beings organism, among them the human body movement. This study ranges from the simplest movements of daily life, such as work or sports activity, to the movement of some internal organs, such as the heart. To study the human body kinetics, biomechanics applies the principles of mechanics and the knowledge of anatomy and physiology, allowing the design of new diagnostic and treatment instruments and the development of better implants and prostheses designs.

View more

Nowadays, Biomechanics analyzes the movements of the combination of joints and muscles. These analyzes allow us to study the loads and efforts to which the human body is subjected. The knowledge of human kinetics makes possible the treatment of injuries and their subsequent rehabilitation, the design of prostheses that allow flexibility of movement, the search for new sports techniques to increase the performance of a physical activity or the prevention of the organism deterioration when doing activities at work and at home. This knowledge can be divided into several areas of Biomechanics: Medical Biomechanics, Sports Biomechanics and Occupational Biomechanics. Another application of Biomechanics is the design of robotic applications. The movements made by the robotic arms or the displacement capacity of some by means of an electro-mechanical locomotor system are based on the mechanics of living beings.

The continuous study of the mechanical behavior of organisms is leading the Biomechanics applications to develop bionic prostheses and artificial organisms that simulate the normal functioning of a real organism and can react to stimuli. In addition, the improvement of the exoskeletons technology will increase the mobility of people with reduced mobility and improve physical capacities when carrying out great strain activities.

View Products
BIOMECHANICS UNITS
Showing 91-109 of 109 item(s)
UNIT FOR DETERMINING THE GAUGE FACTOR OF STRAIN GAUGES - MFGE
  • MFGE
Available
7.3.1.- PHOTOELASTICITY AND STRAIN MEASUREMENT
MFGE
Unit for Determining the Gauge Factor of Strain Gauges
The Unit for Determining the Gauge Factor of Strain Gauges, "MFGE", allows to determine the k factor of strain gauges.The bar rests on two supports with ball bearings, so that it is possible to work with a load under pure bending.To perform such...
STRAIN GAUGE TRAINING UNIT - MEGE
  • MEGE
Available
7.3.1.- PHOTOELASTICITY AND STRAIN MEASUREMENT
MEGE
Strain Gauge Training Unit
The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...
PHOTOELASTIC STRESS DEMONSTRATION UNIT - PSD
  • PSD
Available
7.3.1.- PHOTOELASTICITY AND STRAIN MEASUREMENT
PSD
Photoelastic Stress Demonstration Unit
The Photoelastic Stress Demonstration Unit, "PSD", consists of a frame on which the test specimens are placed. The specimens are made of a special transparent material that has a double optical refraction effect under the action of a mechanical...
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- MECHANICAL TEST
EEU/20KN
Universal Material Testing Unit
The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...
BRINELL HARDNESS TESTING UNIT - EEDB
  • EEDB
Available
7.3.2.1.- MECHANICAL TEST
EEDB
Brinell Hardness Testing Unit
The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...
BRINELL, VICKERS & ROCKWELL HARDNESS TESTING UNIT - EBVR
  • EBVR
Available
7.3.2.1.- MECHANICAL TEST
EBVR
Brinell, Vickers & Rockwell Hardness Testing Unit
The Brinell, Vickers and Rockwell Hardness Testing Unit, "EBVR", consists of a hardness testing machine that determines the three main types of hardness (Brinell, Vickers and Rockwell). It can be adapted to determine hardness of ferrous materials...
CREEP TESTING UNIT - EEFCR
  • EEFCR
Available
7.3.2.1.- MECHANICAL TEST
EEFCR
Creep Testing Unit
The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...
COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC
  • EEFC
Available
7.3.2.1.- MECHANICAL TEST
EEFC
Computer Controlled Fatigue Testing Unit
The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...
FATIGUE TESTING UNIT - EEF
  • EEF
Available
7.3.2.1.- MECHANICAL TEST
EEF
Fatigue Testing Unit
The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...
CHARPY AND IZOD IMPACT TESTING UNIT - EEICI
  • EEICI
Available
7.3.2.1.- MECHANICAL TEST
EEICI
Charpy and Izod Impact Testing Unit
The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- MECHANICAL TEST
MEBM
Euler Buckling Modes Unit
With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
TORSION AND BEND UNIT - MTP
  • MTP
Available
7.3.2.1.- MECHANICAL TEST
MTP
Torsion and Bend Unit
The Torsion and Bend Unit, "MTP", is a combined apparatus for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate its transport...
TORSION UNIT - MTB
  • MTB
Available
7.3.2.1.- MECHANICAL TEST
MTB
Torsion Unit
The Torsion Unit, "MTB", allows to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a metallic rod is fastened by...
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- MECHANICAL TEST
MTT
Torsion Test Unit (30Nm)
To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- MECHANICAL TEST
MTTU
Tensile Tester Unit
With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...
COMPUTER CONTROLLED NOISE CONTROL DEMONSTRATION UNIT - TDRC
  • TDRC
Available
7.3.2.2.- THERMAL AND ACOUSTIC TESTS
TDRC
Computer Controlled Noise Control Demonstration Unit
The Computer Controlled Noise Control Demonstration Unit, "TDRC", has been specifically designed to obtain visual and quantitative results related to noise and vibration control.The main parts of the unit are two noise sources consisting of a...
Ask for information