14.1.- 생체 역학

생체 역학은 인체의 움직임을 포함하여 생물체의 움직임 역학을 연구합니다. 이 연구는 직장이나 스포츠 활동과 같은 일상 생활의 가장 단순한 움직임에서 심장과 같은 일부 내부 장기의 움직임에 이르기까지 다양합니다. 인체 역학을 연구하기 위해 생체 역학은 역학 원리와 해부학 및 생리학 지식을 적용하여 새로운 진단 및 치료 기기를 설계하고 더 나은 보철 및 임플란트 설계를 개발할 수 있습니다.

더보기

현재 Biomechanics는 관절과 근육 조합의 다양한 움직임을 분석합니다. 이러한 분석을 통해 인체에 가해지는 하중과 스트레스를 연구 할 수 있습니다. 인간 운동학에 대한 지식은 부상 치료 및 후속 재활, 움직임의 유연성을 허용하는 보철 설계, 신체 활동의 성능을 높이기위한 새로운 스포츠 기술 검색 또는 신체의 악화를 방지합니다. 직장과 집에서 활동할 때. 이 모든 지식은 생체 역학의 여러 영역으로 나눌 수 있습니다 : 의료 생체 역학, 스포츠 생체 역학 및 직업 생체 역학. Biomechanics의 또 다른 응용 분야는 로봇 응용 프로그램의 설계입니다. 로봇 팔의 움직임이나 전기 기계 운동 시스템을 통해 움직이는 일부의 능력은 생명체의 역학에 기반합니다.

유기체의 기계적 행동에 대한 지속적인 연구는 생체 역학의 응용을 이끌어 실제 유기체의 정상적인 기능을 시뮬레이션하고 자극에 반응 할 수있는 생체 공학 보철물과 인공 유기체를 개발하고 있습니다. 또한 외골격 기술의 개선은 거동이 불편한 사람들의 이동성을 높이고 고부하 활동을 수행 할 때 신체 능력을 향상시킬 것입니다.

제품보기
생체 역학 UNITS
Showing 1-30 of 99 item(s)
BASIC MECHANICS INTEGRATED LABORATORY - LIMEBA
  • LIMEBA
Available
14.1.1.- 역학 기본 키트
LIMEBA

Basic Mechanics Integrated Laboratory

LIMEBA consists on a complete set of exercises and practical experiments belonging to the area of Applied Mechanics in its two mainsubareas:Statics: the analysis of structures in balance.Dynamics: analysis of the motion of mechanisms.LIMEBA is...
PANEL AND COMMON ELEMENTS CASE FOR LIMEBA - MECA/EC
Available
14.1.1.- 역학 기본 키트
MECA/EC

Panel and Common Elements Case for LIMEBA

액세서리 LIMEBA
It is the supporting structure where the modules’s elements are mounted in order to undertake the experiments and hence, the basepanel is necessary along with any module.The panel is pierced with equidistant holes that help students to take...
STATICS EXPERIMENTS - MECA1
Available
14.1.1.- 역학 기본 키트
MECA1

Statics Experiments

액세서리 LIMEBA
Statics is the part of Mechanics that studies any kind of structure or element in balance-equilibrium.Basically the module consist on experiments in which the student shall learn to deduce the main principles of Statics and its most important...
TRANSMISSIONS EXPERIMENTS - MECA3
Available
14.1.1.- 역학 기본 키트
MECA3

Transmissions Experiments

액세서리 LIMEBA
Most recent machines require the transmission of motion between elements to obtain the desired mechanical result. The mechanisms studied in this module are those that transmit motion between two axles.
DYNAMICS EXPERIMENTS - MECA4
Available
14.1.1.- 역학 기본 키트
MECA4

Dynamics Experiments

액세서리 LIMEBA
Dynamics is the part of Mechanics that analyzes the motion of an element or mechanism caused by a force. Thus the study is concentrated on the basic laws of Dynamics.
FRICTION EXPERIMENTS - MECA5
Available
14.1.1.- 역학 기본 키트
MECA5

Friction Experiments

액세서리 LIMEBA
This module considers the most important phenomenon of Dynamics: Friction. It is a manifestation of the energy loss due to contact, effect that happens in every real-world mechanism.
SPECIAL MECHANISMS EXPERIMENTS - MECA6
Available
14.1.1.- 역학 기본 키트
MECA6

Special Mechanisms Experiments

액세서리 LIMEBA
This module considers various mechanisms frequently used in industrial processes, without them some operations would not be possible with the same efficiency. Here these mechanisms are shown and their function analyzed.
SLIDER CRANK MECHANISM - MBD
  • MBD
Available
14.1.2.1.- 메커니즘
MBD

Slider Crank Mechanism

The Slider Crank Mechanism, "MBD", designed by EDIBON, is an example of slider-crank mechanism.This mechanism is made of aluminum and consists of a rotary element (graduated disc), called crank, connected to a rigid bar, calledconnecting rod. When...
SCOTCH YOKE MECHANISM - MYE
  • MYE
Available
14.1.2.1.- 메커니즘
MYE

Scotch Yoke Mechanism

The Scotch Yoke Mechanism, "MYE", designed by EDIBON, is an example of slider-crank mechanism for converting the linear motion of a slider into rotational motion or vice versa. It is made of aluminum and consists of a rotary element, called...
SLOTTED LINK MECHANISM - MBM1
  • MBM1
Available
14.1.2.1.- 메커니즘
MBM1

Slotted Link Mechanism

The Slotted Link Mechanism, "MBM1", is an example of a quick-return mechanism, capable of transforming circular motion into reciprocating motion. It is made of aluminum and consists of a rotary element (graduated disk), called crank, connected to...
WHITWORTH QUICK RETURN MECHANISM - MBM2
  • MBM2
Available
14.1.2.1.- 메커니즘
MBM2

Whitworth Quick Return Mechanism

The Whitworth Quick Return Mechanism, "MBM2", is a mechanism able to transform circular movement into reciprocating movement. It ismade of aluminum and consists of a rotary element, called crank, with a graduated disk, connected to a rigid bar,...
FOUR-BAR MECHANISM - MCA
  • MCA
Available
14.1.2.1.- 메커니즘
MCA

Four-Bar Mechanism

The Four-Bar Mechanism, "MCA", designed by EDIBON, is a bench-top unit to perform laboratory experiments.It is made of anodized aluminum and consists of two rotary elements (graduated discs) mounted on ball bearings. The discs include a scale to...
GENEVA STOP MECHANISM - MME
  • MME
Available
14.1.2.1.- 메커니즘
MME

Geneva Stop Mechanism

The Geneva Stop Mechanism, "MME", designed by EDIBON, is a mechanism that transforms continuous circular motion into intermittent motion. It is a positive drive in which the driven wheel is positively moved or locked.It is made of aluminum and...
COUPLING MECHANISM - MAC
  • MAC
Available
14.1.2.1.- 메커니즘
MAC

Coupling Mechanism

The Coupling Mechanism, "MAC", represents a simple Oldham type coupling. The lateral displacement of the input and output shafts may be varied and circular scales are fitted to the input and output flanges.It consists of two outer discs made of...
HOOKE'S JOINT MECHANISM - MUN
  • MUN
Available
14.1.2.1.- 메커니즘
MUN

Hooke's Joint Mechanism

The Hooke’s Joint Mechanism, "MUN", designed by EDIBON, represents a universal coupling, also called a U-joint, Hooke joint or Cardan joint. The Hooke joint is a universal mechanism that is often used to transmit rotary motion between two...
CAM AND FOLLOWER MECHANISM - MEX
  • MEX
Available
14.1.2.1.- 메커니즘
MEX

Cam and Follower Mechanism

The Cam and Follower Mechanism, "MEX", allows to study the cam-follower and eccentric-follower mechanisms. For that purpose, several plate cam models in different forms, one eccentric and several roller-shaped, flat-shaped, wedge-shaped and...
CRANK MECHANISM - MBI
  • MBI
Available
14.1.2.1.- 메커니즘
MBI

Crank Mechanism

The Crank Mechanism "MBI", is a unit designed to observe, study and record the motion of a crank and the forces involved in a simple engine mechanism. The piston is linearly displaced through a cylinder with the aid of a guide.Bearings are coupled...
ACKERMANN STEERING MECHANISM - MDA
  • MDA
Available
14.1.2.1.- 메커니즘
MDA

Ackermann Steering Mechanism

The Ackermann Steering Mechanism, "MDA", is a bench-mounted unit designed to determine the lead angle of a steering trapezoid in an Ackermann steering mechanism, the disadvantages of incorrectly adjusted track rods and the influence of the track...
WINCH MECHANISM - MMEL
  • MMEL
Available
14.1.2.1.- 메커니즘
MMEL

Winch Mechanism

The Winch Mechanism, "MMEL", allows to study the lifting velocity and load transmission of a winch. Efficiency and load transmission can be determined by force balance.The unit consists of a gear transmission mechanism. One gear is the input gear...
BAR LINKAGES UNIT - MBLU
  • MBLU
Available
14.1.2.1.- 메커니즘
MBLU

Bar Linkages Unit

The Bar Linkages Unit "MBLU" allows many experiments using different arrangements of their parts. The "MBLU" unit includes a selection of more than 20 perforated bars of different lengths and pivots or ‘joints’ to allow students to configure...
WORM AND WHEEL UNIT - MTSF
  • MTSF
Available
14.1.2.2.- 기어
MTSF

Worm and Wheel Unit

The Worm and Wheel Unit, ,MTSF,, allows to demonstrate the principle of a worm gear. The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel. The worm and wheel are positioned a set distance...
ACCELERATION OF GEARED SYSTEM UNIT - MAE
  • MAE
Available
14.1.2.2.- 기어
MAE

Acceleration of Geared System Unit

The Acceleration of Geared Systems Unit "MAE" allows to perform tests to calculate the moment of inertia of a gear train system.The MAE unit includes six gears. Two of them can have another position in the shafts to vary the gear ratio, allowing...
UNIT TO STUDY SIMPLE DRIVES ASSEMBLY - MSDA
  • MSDA
Available
14.1.2.2.- 기어
MSDA

Unit to Study Simple Drives Assembly

The Unit to Study Simple Drives Assembly, "MSDA", allows the knowledge and learning of the fundamentals of the mechanical transmission technique, as well as the assembly, disassembly and experimentation with simple gears.The unit allows to carry...
UNIT TO STUDY COMBINED DRIVES ASSEMBLY - MCDA
  • MCDA
Available
14.1.2.2.- 기어
MCDA

Unit to Study Combined Drives Assembly

The Unit to Study Combined Drives Assembly, "MCDA", allows carrying out advanced exercises and provides an understanding of the significant components and arrangements of the mechanical drive technology.With this unit, practices can be carried out...
UNIT TO STUDY GEAR TRAIN ASSEMBLY - MGTA
  • MGTA
Available
14.1.2.2.- 기어
MGTA

Unit to Study Gear Train Assembly

The Unit to Study Gear Train Assembly, "MGTA", allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the technique of mechanical...
GEAR GENERATION UNIT - MGE
  • MGE
Available
14.1.2.2.- 기어
MGE

Gear Generation Unit

The Gear Generation Unit, "MGE", has been designed by EDIBON to study rack and pinion systems. With this unit the student can draw by an easy procedure the profile of a tooth, produced by the involute process of the rack when passing over the...
GEARED LIFTING UNIT - MEE
  • MEE
Available
14.1.2.2.- 기어
MEE

Geared Lifting Unit

The Geared Lifting Unit, "MEE", has been designed to study a simple lifting mechanism and its use to determine the speed ratio, its mechanical advantages and efficiency.The unit is mounted on a metal structure with bearings that support the gear...
GEARED STUDY UNIT OLD - MESE-T
  • MESE-T
Available
7.1.2.2.- 기어
MESE-T

Geared Study

The Geared Study Drive Unit, "MESE", has been designed to dynamically study different gears, including a standard three shaft gear trainfor study, which can be modified with a simple setting to obtain a simple transmission.For the dynamic study...
UNIT FOR STUDYING EQUILIBRIUM OF MOMENTS ON A TWO ARM LEVER - MEMB2
  • MEMB2
Available
7.1.3.- 통계 및 역학
MEMB2

Unit for studying Equilibrium of Moments on a Two Arm Lever

The Unit for studying Equilibrium of Moments on a Two Arm Lever,"MEMB2", allows to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme of a vertical support...