14.1.- BIOMECHANICS

Biomechanics studies the mechanics of movement of the living beings organism, among them the human body movement. This study ranges from the simplest movements of daily life, such as work or sports activity, to the movement of some internal organs, such as the heart. To study the human body kinetics, biomechanics applies the principles of mechanics and the knowledge of anatomy and physiology, allowing the design of new diagnostic and treatment instruments and the development of better implants and prostheses designs.

View more

Nowadays, Biomechanics analyzes the movements of the combination of joints and muscles. These analyzes allow us to study the loads and efforts to which the human body is subjected. The knowledge of human kinetics makes possible the treatment of injuries and their subsequent rehabilitation, the design of prostheses that allow flexibility of movement, the search for new sports techniques to increase the performance of a physical activity or the prevention of the organism deterioration when doing activities at work and at home. This knowledge can be divided into several areas of Biomechanics: Medical Biomechanics, Sports Biomechanics and Occupational Biomechanics. Another application of Biomechanics is the design of robotic applications. The movements made by the robotic arms or the displacement capacity of some by means of an electro-mechanical locomotor system are based on the mechanics of living beings.

The continuous study of the mechanical behavior of organisms is leading the Biomechanics applications to develop bionic prostheses and artificial organisms that simulate the normal functioning of a real organism and can react to stimuli. In addition, the improvement of the exoskeletons technology will increase the mobility of people with reduced mobility and improve physical capacities when carrying out great strain activities.

View Products
BIOMECHANICS UNITS
Showing 37-48 of 109 item(s)
CENTRIFUGAL GOVERNOR UNIT - CGU
  • CGU
Available
7.1.3.- STATICS AND DYNAMICS
CGU
Centrifugal Governor Unit
The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...
STATIC AND DYNAMIC BALANCING UNIT - MED
  • MED
Available
7.1.3.- STATICS AND DYNAMICS
MED
Static and Dynamic Balancing Unit
The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...
SIMPLE BALANCING UNIT - MES
  • MES
Available
7.1.3.- STATICS AND DYNAMICS
MES
Simple Balancing Unit
The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...
INERTIA FLYWHEEL UNIT - MIF
  • MIF
Available
7.1.3.- STATICS AND DYNAMICS
MIF
Inertia Flywheel Unit
The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...
WHEEL AND AXLE UNIT  - MRYE1
  • MRYE1
Available
7.1.3.- STATICS AND DYNAMICS
MRYE1
Wheel and Axle Unit
The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...
UNIT FOR STUDYING HOOKE´S LAW - MELH
  • MELH
Available
7.1.3.- STATICS AND DYNAMICS
MELH
Unit for studying Hooke´s Law
The Unit for studying Hooke's Law, "MELH", demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring – mass system.The...
WHEEL AND DIFFERENTIAL AXLE UNIT  - MRYE2
  • MRYE2
Available
7.1.3.- STATICS AND DYNAMICS
MRYE2
Wheel and Differential Axle Unit
The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...
COMPUTER CONTROLLED TORSIONAL VIBRATION UNIT - MEVTC
  • MEVTC
Available
7.1.4.- VIBRATIONS AND OSCILLATIONS
MEVTC
Computer Controlled Torsional Vibration Unit
The Computer Controlled Torsional Vibration Unit, "MEVTC" is designed to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with one, two or three...
VIBRATION OF COIL SPRING UNIT - MVRE
  • MVRE
Available
7.1.4.- VIBRATIONS AND OSCILLATIONS
MVRE
Vibration of Coil Spring Unit
The Vibration of Coil Spring Unit, "MVRE", unit has been designed to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion. In this sense, the unit consists of a rigid...
FREE VIBRATION UNIT - MVL
  • MVL
Available
7.1.4.- VIBRATIONS AND OSCILLATIONS
MVL
Free Vibration Unit
The Free Vibration Unit, "MVL", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be made to the...
FREE & FORCED VIBRATION UNIT - MVLF
  • MVLF
Available
7.1.4.- VIBRATIONS AND OSCILLATIONS
MVLF
Free & Forced Vibration Unit
The Free and Forced Vibration Unit, "MVLF", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free and forced vibrations of a simple spring-mass-damper system. Simple...
UNIT FOR STUDYING FREE VIBRATION OF A BAR - MEVLB
  • MEVLB
Available
7.1.4.- VIBRATIONS AND OSCILLATIONS
MEVLB
Unit for Studying Free Vibration of a Bar
The Unit for Studying Free Vibration of a Bar,"MEVLB", allows to study the features of the free vibrations of a bending bar.The natural frequency of the bending bar can be modified adding additional loads at the free end of a bar or varying the...
Ask for information